2023 Krämer EVO2-690S Review | Ultimate Motorcycling

Motor Club
67 followers
15 Video Views·Feb 26, 2025
Hey, what's up? This is Nick with Ultimate Motorcycling, and today we're out here at
Barber Motorsports Park attending the Barber Vintage Festival, which is part of the ARMA series.
Now, this is the biggest collection of vintage motorcycles in the United States. This is sort
of the crown jewel of the ARMA series. It really collects massive amounts of passionate fans with
bikes from numerous, numerous generations motorcycling, coming together, and racing.
Swap meets, there's tons of activities, but I'm here to race one of these things. We're here in
what we've dubbed Kramertown, USA, racing with Kramer Motorcycles, and we're going to be riding
their Evo II S. That is their entry-level turnkey race bike. 690cc, single-cylinder-powered engine,
B-spoke chassis, roughly 280 pounds wet, and that's what we're going to be getting into.
So, let's go ahead and take a walk. Okay, well, here's number 806. This is a 2023 Kramer Evo II
690 S. So, this is their single-cylinder-powered race bike, and as I mentioned before, it's a
turnkey race bike. It uses a KTM powerplant, and everything else is essentially a B-spoke chassis.
You have a steel trellis frame that's specifically designed from Kramer. You also have fully
adjustable Andreani forks, fully adjustable shock, and other things that are pretty much, you know,
unique to this motorcycle. For example, this is a fuel tank. This is a turnkey race bike. Everything
about it is designed to race. So, instead of a normal review, we're actually going to be doing
a racing review for what is essentially a 275 pound wet motorcycle, super light, producing 75
horsepower at the crank. Anyway, this thing is going to be fun. We're going to be doing some
practice on Thursday, on Friday, and then two races on Saturday and Sunday here at the Barber
Festival. So, that's what we're going to be doing. Okay, here we are. We've wrapped up, you know, our
first practice day yesterday. We've done some laps. You guys have seen the action footage.
And, you know, the Kramer Evo II 690 S, the entry-level Kramer products, as I mentioned before,
this thing is super impressive. You guys got to understand that a bike that weighs roughly 275
pounds, wet, fully fueled, ready to go, makes 75 horsepower at the crank. That's an impressive
power-to-weight ratio. And what they've done is really stripped all the unnecessary bits. I mean,
this is a track bike, race bike, through and through. And I think the best way to illustrate
that is to show you how open and accessible everything is. All of this race bodywork is
easily removable for quick maintenance. Crash protection baked in. You have these fully
adjustable forks up front. Triple clamps that are, you know, designed and engineered by Kramer,
but manufactured by X-String. You have the chassis that, or the steel trellis frame,
that is manufactured and designed by Kramer, as well as the aluminum swing arm. And this beautiful
tailpiece that happens to be the fuel tank as well, really helping with weight distribution
and things of that nature. Now, you guys might be thinking, 75 horsepower, that's not a lot.
But when you take that single cylinder thumper, this torquey, rich little engine, and you put it
in a bike that weighs next to nothing. Well, this thing kind of feels like a rocket ship in comparison
to a lot of production bikes that I've ridden. And that's what I really have taken away so far.
This thing is about corner speed, corner speed, corner speed. And as someone that races a Ninja
400 bike, I know my way around about lightweight motorcycles. And something like this is kind of
the pinnacle of that relationship. So the power delivery, you get into the torque,
it just launches off the corner. And the mechanical grip that you can achieve with
the sheer amount of adjustment that we have here, because we can change things like,
not just suspension settings, but also swing arm pivot points, you know, shock length,
things of that nature. In my case, we've gone up the spring rank rear. We've done a couple
little clicker changes here and there. But overall, I'm pretty happy so far. So we're
going to keep things rolling and I'll talk to you guys about this later.
Before we dive too deep into this review, we've got some homework to take care of with the 690cc
LC4 single-cylinder engine sourced from KTM's Enduro R Dual Sport and SMCR Supermoto motorcycles.
Lively mid-range and fun-loving top-end power make it an incredibly entertaining motor.
But what's important for all riders of skill levels to understand is that it's incredibly
forgiving. Come into a turn a gear too tall and its torque will tug you off the apex nicely.
Additionally, its peak performance doesn't overwhelm the senses like bigger bikes might do,
and you're always encouraged to twist the grip harder. The S model isn't equipped with a
quickshifter, though an optional one is available, and the stock clutch is hardy,
providing confident shifts thanks to tidy linkage and sturdy adjustable rear sets.
As far as performance parts go, it's a mostly stock engine. A burly-sounding full exhaust
system is cleverly tucked away beneath the motorcycle and is protected during crashes.
Running a stock engine has some big benefits for owners as it means that off-the-shelf service
parts can be bought from any KTM dealer in the United States. And since we're
forgoing any serious engine work, the service intervals are still completely reasonable.
Naturally, the engine is remapped and raises the redline about 1,000 rpm while four selectable
maps flex this bike's focus on racing. Owners can switch between high-octane race fuel maps
or standard pump gas mappings while they also have access to two high and low engine braking maps.
Now, back to our regularly scheduled program.
The agility and how it compares to other motorcycles on the grid because
not only were we stacked up against the 690cc cylinders, or the 690 single cylinders,
I should say, framers, but we had things like Ducati 848 Evos,
sport classics, and, you know, other twins and triples and then vintage motorcycles as well.
So it was a, you know, a very diverse grid. And what I noticed in this thing, you know,
I can just carry much more roll speed in comparison to a lot of other bikes out there.
And so really just driving that point home is just roll speed, roll speed, roll speed.
Being able to trust the chassis and understand that feedback is something that's super crucial
for a track slash race bike like this turnkey track slash race bike and really teaches you
the fundamentals of racing. Because again, I'm not an expert racer. I do it when I have time.
So race one, you know, we got in some good groups and got the lap times down a little bit,
had some good fun, shook the rust off, as I mentioned, but really my race two for the day
was the better race. We were mixed in with our true competitors, the other 690 single
Kramer bikes. And then there's a handful of other waves within our race as well.
But again, you know, sacking up against things like, uh, some pretty quick riders on,
uh, super motard bikes and super models or whatever. And you know, what really comes
through is just the ability to trust the front end and embrace that lightness, that 275 pound
wet weight, and really lean into the torquiness of this engine because you're able to get the
thing tipped in, carry your speed to the apex, and then use that punch and just launch out of
the corner pretty well. So that's day one in a nutshell, had a great time racing so far. Uh,
we're going to work up, work on some suspension settings and, uh, just a couple of little tire
settings and go from there, but day two is going to happen tomorrow. So for now, we're going to
get into some track action and, uh, talk about that. The riding position deserves some attention
because the Evo 2 feels like a full-size motorcycle, despite what its CCs might indicate.
That narrative begins with a nice reach to the adjustable clip on the handlebars and the high
mount rear sets offering quite a bit of ground clearance. What seals the deal is the fact that
there's plenty of room front to back in the roughly 32.3 inch seat, and it feels trim,
lean, and spacious as a super bike, but half as narrow. What draws plenty of attention is the
one-piece XPE plastic tailpiece doubling as its fuel tank and subframe. Carrying fuel there helps
with mass centralization and front to rear weight distribution, making the bike feel more consistent
as the fuel load drops. Kramer staff have said that they haven't broken a single tailpiece yet,
which is quite the endorsement for the rough and tumble lives that race bikes lead. On that note,
spot the built-in replaceable sliders, which isn't something you'll ever see on a production
motorcycle. Stealing the spotlight is the Kramer's uncompromising steel trellis frame and aluminum
swingarm. As a pure racing machine, its only mission is to get around racetracks as fast as
possible. Many production bikes must consider a variety of riding surfaces from bumpy streets or
tracks, and concede stiffness in the name of compliance or comfort. That philosophy can
trickle down to geometry, which might favor conservative figures that sap handling potency.
There are no such downsides here with the Kramer, and the chassis feels properly stiff,
resulting in unfiltered feedback to the rider. Between the lightweight and aggressive geometry,
it takes a few laps to wrap your head around and how sharp and precise the front-end feel
actually is, because it's unlike anything that I've felt before. Meanwhile, the sizable 55-inch
wheelbase makes it feel stout and stable on the edge of the tire, and the sheer amount of grip
makes you completely forget that there's no traction control to watch over your shoulder.
It's just that good. All right, so we're done here at the Barber Vintage Festival at Barber
Motorsports Park, which is part of the ARMA rounds. And I've got to say, I've been super
impressed with this Kramer Evo II 690S. Again, this is their base model, quote-unquote,
motorcycle, which what you're buying is an extremely focused product. But for anyone
that's getting to the racetrack, or they're serious about club racing,
or just serious about their track days, these turnkey options are extremely appealing and
represent a great value. Because, again, you don't have to turn a production bike into a
track bike. And there's some good benefits to that. Now, we wrapped up our two races for the day.
Let's just do a quick recap. Now, the first race of the day went pretty decently, made some passes,
you know, did the thing, did some dicing, which is what this whole experience is about,
is just kind of getting out there and getting some track time, racing with your buddies.
And what it really highlighted for me was the cornering ability, because that group
was a multi-wave race. And, you know, it had things like Ducati 848s, older Ducati 848s,
of course, triple cylinder engine bikes, a lot of different things in there to just,
you know, find your way around these bikes. Because, again, some of these things have a
lot more power than I did. So using that corner speed, being able to, you know, take those lines,
get underneath people, and really trust what's going on with a super communicative chassis,
that's really what sort of came through in that race. Of course, what I also needed to work on,
and still need to work on, is my braking abilities. And that's something that, you know,
race two, which went a little better and hit my goal for the weekend, which was do a top five.
So I ended up fifth position overall in that group, super happy about that. But of course,
there's more work to do. There's more potential in the bike. And, you know, maybe there's more
potential in me, we'll find out. But yeah, on that end, you know, the braking, you have something up
here, like a Brembo Master Cylinder, a single disc up front, 320 millimeter, with a single
Brembo M50 caliper. So that's a lot of braking power for a bike that tips the scales at 275-ish
wet, because things are a little bit malleable on race bikes, depending on the options.
That said, you know, that last race, that was a blast. Had a bunch of fun with some other
Kramers out there, because it's kind of the sound of singles one class, which is, well,
this is sort of the premier bike in that group. And again, you know, for me, it's just being able
to really understand what a chassis is doing and then go through the weekend and have that experience
of having the full adjustability from ergonomics to suspension to true chassis adjustment, you know,
with this adjustable swingarm pivot point, which we actually didn't change just because I was in a
really happy zone right out of the gate. Kramer did a pretty good job of setting this bike up
initially for me, and as luck would have it, I was pretty content with it. So we just, you know,
turned the clickers here and there, but we're good. Yeah, it's one of these things where you
look at a bike like this, and at $16,000, it's a turnkey race bike as it sits. So it comes in these
unpainted white fairings. That's a DIY job on you guys, so make it as you do. And, you know, for me,
it just allows you to have the confidence and build your skill set as a racer or club day guy,
and I think that's what it's all about at the end of the day. Now, of course, I'm Nick Sena. If you
guys have any questions, go ahead and drop them down below, and we'll get you some answers.
But last thing you got to say is go ahead and be safe out there. So take care.
