DeWalt Multi Tool Upgrade - Depth Guide_Gauge quick and easy DCS353, DCS354, DCS355, DCS356, DWE315

Power Machine Tools
2 followers
Cool upgrade: Depth Gauge/Guide for DeWalt Oscillating Multi-Tools, fits cordless DCS353, DCS354, DCS355, DCS356 and corded DWE315.
#machine #tools #powertools
This is the DEWALT Multifunction Tool DCS-356B. It's a great tool, but there is an even better
upgrade. And what I'm about to show you works also for all the other DEWALT Multifunction Tools,
DCS-353, 4, 5, and the quoted WE-315 tool. So where this tool falls short is it doesn't have
a depth gauge. So what I do is a lot of times I just use a magic marker. I put a little mark
on the blade so that I don't over cut, I don't go too deep. But I wish this tool would have a
depth gauge built in, which it actually has a way to do that. And you see these two holes there.
One is threaded, the one on the right, and the other one is just a, you know, peg hole. And
DEWALT makes this little assembly block that allows you to attach a depth gauge to this tool
and all the others. Unfortunately, DEWALT sells these parts separately. So there is the assembly
block, and then there's the depth guide, which you see here has a little roller on the front.
And then there's the knob, this setting screw here with the knob. And all three parts go together,
but they don't sell them as a set, which is kind of weird. But hey, still, for, you know,
about $15 to $20, you can upgrade your multifunction tool by installing this assembly block here.
It has a hex screw built in. You just tighten that up, make sure it's really tight. And then
you can put the depth gauge into this assembly block. And there's multiple orientations that you
can do that with. And then you adjust the depth, and you see that the depth gauge is kind of
flattened out there. And then once you have the right depth, you just pull the set screw,
and it stays really well put. So this is very solidly engineered. It's all metal,
and it has a very wide range of depth that you can set. So you see this is quite long.
So let's use a longer blade. And I'll show you another cool feature. You see that this depth
gauge has a roller in the front. And what's nice about this is that when you cut along a piece of
wood, or a piece of drywall, it allows you to just kind of roll along that piece of wood. So let me
show that here. So let's say you're cutting with a round blade. Yeah, this is the wrong blade. But
you know, if you have a kind of a round blade, one of those half moon blades, then you can just
roll on that roller, and use that as a depth gauge. So here, let me show that again with this
half moon blade here. And just adjust it here, and there you see. So imagine this is a piece of
drywall, or a piece of wood that you want to cut. And that works really, really well with the roller.
So overall, it's a great addition to the tool. I really like it. Also, the nice thing is,
if you don't need the depth gauge, it doesn't really get in the way. And worst case, you can
always take it off, right? I do, however, recommend that you use a threadlocker when you first mount
this assembly block with that hex screw onto the tool. Because this is a vibrating or an
oscillating tool. If you don't use threadlocker, this will come loose pretty quickly. When I first
mounted it within, you know, a few hours, it started to come loose, even though I had tightened
it really well. So use the threadlocker. And, you know, be generous with it. And this is the blue
threadlocker. So you can always remove it, it doesn't glue it down permanently. And, you know,
I think that's a great way to prevent this from coming loose. If you do want to take it off,
you see this little assembly there, it has a retaining clip. So there's no danger of losing
that set screw, which is great. And yeah, this is something that you definitely want to use
threadlocker on so it doesn't shake itself loose. Now another cool feature of this assembly block
is that there are different channels for the depth guide. So you see, this is the one that we
had earlier, right for straight use. But you see, there's another channel, if you want to use that
tool at an angle. And a lot of times, when there isn't a lot of space, or you know, when things
are really tight in corners, you want to set your blade at an angle. And with the depth gauge,
you can also set that at an angle, which is great, because then you have the blade aligned with the
depth gauge. And it allows you to get into the corners. So this is how that looks. And again,
with that roller, that's really kind of cool. So this is super useful. And there's even a vertical
hole there, right there, so that you can put the depth gauge that way, in case you have some
specialty blades. I don't use it all the time. But when I do need a depth gauge, this thing is
really, really helpful. Overall, solidly engineered, 100% metal, right, this isn't
going anywhere. So go and check out your DeWalt multifunction tool. And as long as it has these
two peg holes, right, the one on the left is just a peg hole, the one on the right is threaded,
as long as it has these two holes here, this assembly block will fit on there. And then you
also need to buy the depth gauge and the knob. Unfortunately, it's all separate. And then you
can install a depth gauge on your DeWalt multifunction tool. Just don't forget to use
the thread locker for it. Thank you for watching. And if you thought this was useful,
please like and subscribe. Thank you.
