The arts and crafts specialists of Versailles - Gilding on metal

Modern Arch
65 followers
For over a year, you can follow live the restoration of a key feature of the gardens of Versailles, the Latona fountain, on http://latone.chateauversailles.fr/en. Gilding: mixing the paste, sizing, yellow undercoat, etc. Discover all the secrets of the gilders on metal. #Latone
French version : • Les Métiers d'art de Versailles - Dor...
Comments are disabled for this video.
The support is prepared with anti-corrosion paint.
Once the support is nice and dry, we apply a layer of undercoat made up of one-third
linseed oil and two-thirds turpentine and yellow ochre pigments.
Into the undercoat, we add a shiny flat varnish, which we call the ground.
Next, we apply a layer of adhesive size.
The size used for the fleur-de-lis is what we call three-hour size, but you have to keep
checking depending on humidity and temperature, as it can take less time than that.
The right moment to apply the gold leaf is when the size is said to be tacky.
It still has a certain bite, but is no longer sticky.
As for with water gilding, the tools used are a custom palette, a tip, a gilder's cushion
and a gilder's knife.
Using a chicoteur, we press down all over the surface area, rotating slightly to apply
the gold to the deepest crevices.
All excess pieces of layered gold are removed, and the fleur-de-lis becomes fully gilded.
This stage is done immediately after the gold leaf has been applied.
We finish off the job with a rondin, a small brush made of polecat hair, used to smooth
out the surface.
Finally, using the chicoteur, we collect the small flakes, which will be reused for lapis
lazuli or for decorative painting.
