
Solid Waves - Marine Corps Channel
24 followers
6 Video Views·Feb 20, 2025
Hi, I'm Microdrac2, the drone you may recognise from several different videos,
and yep, that's me, in Brisbane. You may be wondering how I ended up in this situation.
Well, let me explain, while I take a bit of a rest.
Well, that's what happens when a drone encounters a gum tree in Australia,
and you think, ah, the sensors are telling me there is something beneath me. I shall,
of course, ascend to avoid the thing I'm clearly flying too close to,
and it turns out that gum trees have multiple levels of branches,
and you've flown in between two of them, and you end up flying into the one above.
You can probably just about see the base of said gum tree in this shot,
which is from early in the same flight.
Nonetheless, welcome to Brisbane and the Queensland Maritime Museum,
where we spent a couple of days and gathered so much footage.
I mean, there's the museum itself, which you can see
part of just in the lower part of your screen at the moment.
There is, of course, the star attraction, HMAS Diamantina,
which we're semi-circling at the moment.
And then there's also a light ship, which you'll see coming up in a second.
All these other smaller vessels, which you can see on the opposite side of Diamantina,
as well as some rather interesting interviews with some of the staff who work there.
So over the year, expect quite a few videos from this particular location.
But for this particular video, we're going to be looking at Diamantina herself,
her history, how she ended up at the Queensland Maritime Museum.
And as a quick note, this particular tour of the ship will mostly be
narrated by me in post-production, simply because it was incredibly hot.
Now, I understand that for you fine folk over in Australia,
that probably sounds like a typical Pommy complaining,
especially since, of course, June is approximately Australia's winter time.
But then again, Brisbane is one of the more northerly cities.
And of course, at this point, we'd just flown up from Melbourne,
which was, yeah, about 10 degrees cooler.
And the main problem wasn't actually me.
It was the camera and the tripod,
which became overwhelmingly hot to the touch in the bright sunshine.
And the camera started shutting down.
So I had to make use of the camera in still mode rather than video mode,
which obviously generates more heat.
The drone I could fly because it's self-cooling with its fans.
And I could stay in the shade while piloting it.
And I had a few other small cameras with me.
But nonetheless, let's get on with the details, shall we?
By the way, the drone was kind of fine.
I just had to replace a prop or two.
So Diamantina, she is a river class frigate
and essentially continues the tradition of Australia,
apparently having managed to preserve a decent portion
of naval and general maritime history
that originated in the UK far better than the UK itself has managed to do.
Because there are precisely two river class frigates still surviving in the world.
One is in Myanmar and one is Diamantina here in Australia.
And notice that neither of those countries are the UK.
Although to be fair, the eight Australian river class were actually built in Australia.
In Diamantina's case, along with one of the other ships,
she was built at the Walker shipyard in Mabra.
The river class were quite an important group of ships
as the idea was to combine the capabilities,
approximately speaking, of the Black Swan class sloops,
which all had to be built to military spec,
but were faster, longer range,
more heavily armed and overall more capable
than the rapidly built flower class corvettes
with the fast building capability
and therefore somewhat closer to mercantile standards
of said flower class corvettes.
And that hybrid vessel ended up being the river class,
which was originally supposed to be a twin screw corvette.
As you'll see in a minute, it has twin screws, hence the name.
But it was decided that this was a very silly title
and so they were named frigates instead,
bringing back a designation that had been out of use
for about 70 or 80 years at that point.
There were subtle differences between each group of river class
produced both within the Royal Navy
and for the Royal Australian and Royal Canadian navies,
but generally speaking, they were a little bit heavier
than the Black Swans,
about the same speed at around 20 knots
and had about the same range
of about 7,500 nautical miles.
But crew requirements were reduced
partially by using vertical triple expansion engines
instead of steam turbines,
at least in most of the river class, including Diamantina,
and changing up the armament a little bit.
Diamantina and her sisters would have
only two single four-inch guns
instead of the six four-inch guns
found on a Black Swan class,
which would be mounted in three twin mounts.
But instead of that,
the river class would be able to carry
even more depth charges than a Black Swan.
It had multiple depth charge throwers as well as rails,
a fairly heavy anti-aircraft armament
for a ship of its size,
consisting of multiple Oerlikons
and then later 40mm Bofors,
and a hedgehog mortar,
which the Black Swan class did not have,
at least by default.
This optimized the river class
to be able to engage submarine targets
and defend themselves against air threats,
which, as it turned out,
were the far more important roles
for an anti-submarine convoy escort
than the surface action
which a Black Swan class could engage in
with its six guns.
Diamantina herself almost missed the Second World War.
She was laid down in April 1943,
launched almost exactly a year later in 1944,
and commissioned once again
almost exactly a year later in 1945,
each of those dates taking place in April
of the various years.
But of course, by April 1945,
the Axis powers were really on the ropes.
Germany would surrender less than a fortnight
after Diamantina was commissioned
and Japan was only a few months behind.
But for all that,
she did see quite an active part
in the concluding part of the Second World War,
taking part in shore bombardment
and supply operations
during the Bougainville campaign,
and then taking part
in a number of surrender ceremonies
at various Japanese-held islands,
including several that were actually
held aboard Diamantina.
In common with a lot of escorts,
she was fairly quickly decommissioned
after the Second World War,
which actually put her in a fairly good set
because she was practically brand new.
She entered reserves in summer 1946,
but almost 15 years later,
at the end of the 1950s,
the Royal Australian Navy
was looking for a research vessel
which was big enough to cover the ocean
both below and above the surface
and the weather.
And so throughout the 1960s and 1970s,
she fulfilled that role
in the Royal Australian Navy,
obviously somewhat disarmed
because you don't really need a hedgehog mortar
when you're trying to preserve the whales.
And from there,
she paid off directly
from the Royal Australian Navy
to the care of the Queensland Maritime Museum,
who promptly started refitting her
back towards her original
World War II standard fit-out.
And this dry dock is where she's lived ever since,
with two exceptions.
In 1998, the seals on the dry dock gate failed,
so she lived in a wet dock at that point
until 2006 when she was towed out
to allow them to repair said dry dock.
And then about four or five years later,
there were some fairly big floods in Queensland,
which ended up filling the dry dock as well,
although at that time the gates
were in good condition.
But since Diamantina has been maintained
in excellent condition,
although she is in a dry dock,
she is still watertight,
so she just bobbed around in the dry dock
until it could be drained again.
And as you can see,
she's still there,
looking in really good shape.
So let's go aboard.
We're obviously starting up at the bow.
You can see here we have the breakwater,
which is rather important
because although there's a reasonable degree
of freeboard,
you will, of course,
have water coming over the bow
at semi-regular occasions
since this is a fairly small ship.
On escort duty,
it doesn't really have much of a choice
of where it goes
or what weather it goes in.
And so this is necessary to keep things
a little bit dry.
Now, when you look at various photos
of River Class,
they do have guns in various positions,
and some later models in some navies
even have twin mounts,
but Diamantina,
in common with most rivers,
only had a single mount for an aft.
Now, the single mount is in its correct position
for World War I,
but if you look at some of the refitted rivers
in the Cold War period,
they had the 4-inch gun moved down to here,
which is why you can see
this circular mounting plate.
The little square mounting plate further back
is where the hedgehog launcher would have been.
So if anyone knows
where they can find a spare hedgehog launcher,
I'm sure Diamantina would be most grateful.
But up one level,
you can see here,
this is the original position
of the 4-inch gun.
And interestingly enough,
because, of course,
they've had to source 4-inch guns
for Diamantina as a museum,
she has slightly different 4-inch guns
for an aft.
The actual gun itself
is effectively the same,
but the one you see up front here
is in a open-backed
but shielded position.
So this is a naval mount,
whereas the gun aft
is the army version.
So as I said,
exactly the same gun,
et cetera, et cetera,
but it lacks this shielded naval mounting,
which is what you would have had
historically on the ship,
both fore and aft.
And then immediately after that,
you can see one of the ship's
40-millimeter bofors sitting there,
obviously providing medium anti-aircraft defense
from a position
that allows it to essentially
superfire over a 4-inch gun,
which gives it quite a wide arc of fire,
around about 270 degrees,
so it can defend
a fairly large portion of the ship.
Now, of course,
does this 4-inch gun work?
You may ask.
That's one of the hallmarks
of a well-kept museum ship.
Well, let's ask a volunteer.
And by ask a volunteer,
I mean stick them in the gun
and ask them to move it around.
And there it goes.
So you can see this is the forward gun
on Diamantina
training itself nicely to port.
You can actually see
quite how short-barreled
this 4-inch gun was,
because although it's
a lightweight dual-purpose gun,
it really is only meant
to poke holes in submarines
and throw anti-aircraft shells at aircraft.
It's not supposed to get
into surface engagements
with major warships,
which is perfectly fine.
That's what bigger escorts
and destroyers are for.
And of course,
not only can you control the horizontal,
but you can also control the vertical.
So this gun has its full set of rotation
and theoretically,
I suppose, could be made operational.
But as with a number of museum ships,
you find that the area around said museum
has gradually been urbanized.
So yeah, people in apartment blocks
don't tend to take very kindly
to close-range shore bombardment.
But of course,
wherever there is an operational
piece of equipment
and they'll let me use it,
I will, of course,
do my level best to use it.
So in the background,
you can hear me
cranking away frantically.
Obviously in the right-hand position.
So this is allowing me to rotate
the gun left and right.
And with the camera,
they're looking out
of those viewing portals.
You can get some idea
of roughly how quickly
you can actually track
this thing around,
which is surprisingly quick
for a weapon that weighs several tons.
But at the same time,
you can see why
there would be a delay
in the gun coming into action
should a submarine
pop up to the surface.
Because of course,
the gun crew would have
to be doing this.
So if the submarines
pop to the surface,
let's say at 30 degrees
off the port.
Well, OK, I was tracking starboard
a little bit more enthusiastically,
but you can still get the idea
it's going to take
a little bit of time
to bring the gun over to bear.
And then once you have
brought it to bear,
of course,
you have to train for elevation.
Now, obviously,
you would have somebody there,
but in this case,
I'm just going to move across
to this side of things.
And now you can see
the rate of elevation
that's actually
significantly faster
through the degrees of training,
albeit obviously
with limited degrees
compared to the rotation
than the rotation motion itself.
In this case,
I've strapped the camera to my head,
hence the slight judder.
And just out of the camera view
down there was a four inch shell.
Of course, this is an inert one,
but it gives you some idea
of the overall size of the thing.
It is a one piece ammunition.
So the charge in the brass case
and the shell itself
are all mated together
and you just feed that
into the breech
as opposed to the slightly larger guns
where initially the shell
and this brass casing
full of propellant
would be loaded separately.
And then, of course,
once you get up to battleship
scale weaponry,
that charge becomes multiple bags,
either just multiple bags
or in the case of German guns
and things like the automatic guns
on the Salem,
you get a brass charge
at the end of the stack
of explosive or propellant,
because technically propellant
doesn't explode
unless something's
gone very badly wrong.
And here's another view
of that forward 40mm Bofors.
Now, as I mentioned before,
the River class
initially as conceived
would have had 20mm Oerlikons.
The 40mm Bofors were
kind of an aftermarket add-on.
But by the time Diamantina
was launched and commissioned,
as we said,
at the end of the Second World War,
this had become
a fairly standard fit out,
hence why she has them.
But unlike some escort vessels
and destroyers and so forth,
she doesn't have the twin
or quad mounts,
not because they wouldn't
have been useful,
but because, as you can see
from the bandstand here,
she is a very small vessel
and the advantage
of the single 40mm Bofors
is that they can be manually
trained relatively easily.
Whereas if you have a twin
or quad 40mm Bofors installation,
whilst you can manually
track with them,
it's a lot slower
and a lot more involved process.
This way, you don't have
to worry about RPC,
i.e. remote power control,
on such a small vessel.
But small spoiler alert,
off to the side of the dry dock,
they actually have quite
a few different examples
of various guns that have served
in the Royal Australian Navy,
both before World War II,
in fact, quite considerably
before World War II,
as well as World War II
and post-World War II examples
as well,
some of which did have RPC.
So if you want to review those,
it's a simple matter
of just stepping off the ship
and walking around
to the starboard side
of the dry dock.
You'll notice there
some of the more advanced
anti-aircraft installations.
But coming back aboard,
this particular 4-inch gun
you can see is a quick firing
Mark 16 variant,
and the engraving on it
also indicates that it was
manufactured in 1941.
So it is a World War II period gun,
but probably one
that was installed
on either a ship
or several other ships
during the conflict,
rather than Diamantina,
which of course
only was commissioned
about four years
after this gun was.
And you can see here
over on the right,
a little lever
that is currently set to QF,
also has an SA setting.
QF is quick firing mode,
but contrary to what
you might think,
that means that you fire the gun
and then you have to
manually open the breach
and that will then eject the casing.
So essentially,
you are just firing a single shot
and then choosing when to reload.
In semi-automatic mode,
once you fire the gun,
the breach will automatically
open and eject the casing.
Now, theoretically,
of course, that means
you get a much faster rate
of fire with semi-automatic mode.
You might think,
well, why would you ever
want to have it set
to quick fire mode instead?
But bear in mind
that you've also got to
have people behind the gun
who are going to be
bringing ammunition up.
The gun could be training round
and maybe at certain
elevations as well.
You might not want
a hot brass cartridge
automatically fired back
as it might hit somebody
or bounce into
an inappropriate location.
And so it'd be up to the gunners
to select which particular
mode they wanted.
A well-trained crew
could operate in quick firing
mode almost as fast
as in semi-auto.
Now, moving us further
after we come to the bridge,
this is an ultra compact bridge.
You might recognize
some of the layout from Castle Main,
but if anything,
this is actually
even more compacted down.
As you can see,
we've got the wheel for navigation.
We've got our stabilized
magnetic compass dead ahead,
and we've got the gyro compass
to the right.
That's on the old tripod there.
Although, as someone pointed out
in the Castle Main video,
technically speaking,
this is a gyro repeater
because the actual gyroscope
that forms the gyro
part of the gyro compass
will be elsewhere,
deeper down in the ship.
We've also got a pair
of engine telegraphs,
one on either side,
and yes, they do work.
Now, a couple of things
you might have noticed.
Well, one, why two engine telegraphs?
That's because each one
is connected to the feed
for one of the engines.
So port one goes down
to the port engine,
starboard one to the starboard engine.
But you will also see
that in this particular location,
there are no windows dead ahead.
And that's because this is,
of course, the navigation
portion of the bridge
and on a river class frigate
that's separate
to the compass platform,
which is the bit
you can actually see out of.
So there would be an intercom
on the compass platform,
one level up,
and then that would be
repeated down to here.
And then the ship's
navigating officer,
who actually can't see
where he's going,
would set his course
via the repeaters
that came down from there.
So he'd either receive
a verbal order by the voice tube
or just up the top left,
you can see that gray
horizontal box
with what looks like
a black line in it
that shows what the con
up above or conning officer
has actually set
as his desired course
in terms of bearing.
And then you've got
your little bearing dial
to let you know
if you're actually doing
what the officer of the watch
or the commanding officer
is wanting you to do.
Of course, as any museum ship
curator will tell you,
maintenance and restoration
of a ship is an ongoing cycle
that never quite ends.
But at the time
that we were aboard,
obviously that being in June
2023, bridge wing
Oerlikon 20 mils
had just come out
of restoration.
They just had a few little bits
and pieces to touch up.
As you can see,
the recoil spring
needed to be painted.
But other than that,
this was pretty much
as it would have been
in the Second World War.
So there's one of these
either side,
nice up high,
obviously Oerlikon 20 mils
don't weigh as much as a Bofors
and take up much less space.
So they're very,
very commonly found
on the bridge wings
of Allied warships.
And right nearby
is a small signaling lamp.
Now, I say this is specifically
a signaling lamp for two reasons.
One, it has the usual shutters
that you can find on searchlights
and signaling lamps
of all shapes and sizes,
which obviously allow you
to communicate with other vessels.
However, in this case,
as you can see with my hand to scale,
this is not a particularly large lamp.
So whilst you could technically
use it as a searchlight,
it's not really going to see very far
or spread over a particularly wide area,
which indicates that
this is primarily
for signaling other ships,
not for looking for stuff.
And this brings us up
to the bridge proper
or more properly,
the compass platform.
And as you can see,
this is an open bridge
in the keeping with Royal Navy
and Commonwealth Navy
tradition of the First
and Second World War,
whereas most American ships
of this size tended to prefer
a fully enclosed bridge.
I've discussed in other videos
the pros and cons of both,
but essentially the open bridge
is more exposed to the elements.
That's its main downside.
The main plus side
is you have a much better
field of view,
especially against air attack.
And on the starboard side
of the compass platform
is this little structure,
and it looks a little bit
like a wooden tin hut.
And that's pretty much
what it actually is,
because down here
you would find the ASDIC office.
So that's obviously British
and Commonwealth for SONAR,
or well, ASDIC was original.
SONAR later became a slightly
easier to use acronym.
But this was really not
the most pleasant
of operating environments,
apart from the stress
if you're hunting a submarine
of, you know,
everybody's probably
going to live or die
by your expertise.
You are in a tiny tin shed
with a set of headphones
and some kind of
visual display screen,
obviously being a slightly later vessel
and having served later on as well.
She's got these PPI indicators,
but you have to try
and work out what's going on.
And if you happen to be
in a relatively
cold environment
like the Atlantic,
well, you're in a tin shed,
you've got no insulation.
And if you're in a warm environment
like, I don't know,
the Southwest Pacific,
well, you're in a tin shed
with no insulation
and you've got a bunch
of rather heat
generating electronics up there,
which, yeah,
you're going to cook pretty quickly.
And if that wasn't quite
enough fun for you,
somebody stuck the radar
set in here as well,
or rather the receiving
and tuning portion of it,
because obviously the antenna
are up on the mast.
So you've got this
socking great thing
also present
in the same room
heating up the space.
So I can imagine that
the ASDIC hut dash,
also now technically
radar room, I guess,
had first call on fans.
Now coming further aft,
because there's a whole load
of really nicely installed interior,
but as always
with these museum ship tours,
you don't want to give
everything away
in one of these videos
because this will give you
a good flavor of what's there
without, you know,
obviating the need
to actually go there
because people do need
to go to these museums
in order to, you know,
support them.
But coming further after,
as I say,
you can probably just about
see dead center in the picture.
There is a little circular
impression on the deck plating.
So this is where
another of the ship's
anti-aircraft guns,
almost certainly a single
20 millimeter Oerlikon
would have been installed,
but Diamantina
doesn't have
sufficient 20 mils
to put them all in place.
So this one
and its corresponding slot
over on the port side
remain blank for the moment.
Incidentally,
if you happen to have
a spare pair of single
20 millimeter Oerlikons
and you happen to be in Australia,
please contact HMS Diamantina.
I'm sure they'd be glad
to take them off of you.
Now I do have to actually
walk back something
I said earlier in the video,
because yes,
originally this aft four inch gun
was an ex army gun
and well,
it still is an ex army gun.
But if you look on much older
photos of Diamantina,
you'll see it's just sitting there
in the open.
But contrary to what
I said earlier in the video,
they did in fact manage
to find a shielded
naval mounting for it.
And so the aft gun now matches
the forward gun
in general overall appearance.
And yes,
they keep this one
in good working order as well,
which is quite amusing
because, of course,
they're just under the gun.
You can see on the port
side of the ship
is the standard access gangway
for the vessel.
So if you are of a
particularly malicious mindset,
you can, of course,
train the four inch gun
on incoming visitors
who generally don't
seem to realize it
is, of course, not loaded,
which adds the amusement
factor even more.
Now I mentioned the ongoing
restoration work
and maintenance.
This is basically being done
working aft to forward
in the majority of cases
for the ship.
And in this particular case,
you can kind of see
the difference
in the port side
bofors aft 40 millimeter,
which you can see here
looking in pretty nice condition,
having been restored
only a few months
before we arrived.
But even then,
between the heat,
the rain and the general
humidity levels of Brisbane,
you can see just a little bit
of rust creeping in there
around the bolt heads.
But that's just
what ongoing maintenance is for.
And you compare that
with the starboard
aft 40 millimeter,
which isn't in terrible condition.
But as you can see,
the environment has worn away
and chipped away at
quite a bit of the paint work,
which in turn has exposed the metal.
And the reason you can tell
that this is mostly
relatively recent wear and tear
is the fact that
a good chunk of some
of the exposed metal work
hasn't actually begun
to rust and oxidize
very heavily.
So this is why,
as I say,
you do need to,
if you can,
visit these museum ships
and support them
because these are not
inert displays and exhibits.
They need constant work
to be in a good state
for public showing.
And since we're on the stern,
we can also see
the other half of the ship's
anti-submarine equipment.
Now, of course,
the hedgehog launcher
at the moment
is missing in action.
Again, if you happen
to have a hedgehog launcher
or a decent replica of one
or can make a decent replica
of one and are in Australia,
please contact Diamantina.
I'm sure they'd love
to have one up front.
But back here,
we have some K-gun launchers
or depth charges,
in this case a starboard one.
And as you can see,
just back there as well,
depth charge rails.
Now, this is a very
important combination
because it's not just a case
of, oh, well,
the K-guns allow you
to launch depth charges
off to the side
as opposed to the rails,
which allow you
to drop them off the back.
This is all part
of an integrated system
to try and box in a submarine
because a submarine
has to be found on ASDIC,
which in most of the Second World War
can only have
a forward-looking bearing.
And then because
your depth charges are off,
you have to sail over it
and then drop the depth charges.
The problem, of course,
is that as you sail over the sub,
you lose contact with it
and it could potentially evade you.
This is complicated by the fact
that due to the bearing limitations
on the sensing device,
the deeper the sub is,
the sooner you lose contact with it.
Part of the effort
to mitigate against this
was to have what they call
a pattern of depth charges
rather than just sending
the one downrange.
What you would do
is you would have some
which would go aft off the rails,
but you would also fire
several depth charges
off to port and starboard
from your K-guns
or if you were lucky enough
to have a Y-gun launcher
from the centreline,
they go both port and starboard
on those things.
And that would create
a wider spread pattern
which hopefully
would stand more of a chance
of catching the submarine
in its blast radius.
A typical 10-charge pattern
would be three charges
from each rail, port and starboard,
and two charges
from the K-guns on the port side
and two from the K-guns
on the starboard side.
Now the disadvantage, of course,
was that with the depth charge rails
you just rolled off
some depth charges
and they were more ready to go
until you ran out of those
on the rails
and then you'd have to restock them.
Whereas with the K-gun,
every time it was fired
you'd have to reset
and reload the thing.
And as you can see here
with the two port side K-guns,
there would be a rack
to hold more depth charges
directly adjacent
because although these things
were not the one and a half ton
converted sea mines
of the early depth charges
of the First World War,
you're still talking about something
that weighs somewhere
between 400 and 500 pounds,
which is quite a lot of weight.
This is not a weight
that a single human
is going to be able
to either pick up generally
or even if you are particularly,
especially strong
and really should be
on World's Strongest Man,
pick up and move around easily.
And so usually
you would have either cranes,
little cranes,
multiple men picking them up
or a nice rack
which allows you
to just shove them out.
Of course, ideally,
you would therefore want
to project depth charges
ahead of you.
The problem with that
is that the K-guns
and Y-guns could only
really project a depth charge
a few dozen yards.
And that would mean
that if you did fire
one dead ahead,
the depth charge
will probably be directly
underneath your ship
when it went off,
which is not going to do
good things to your ship,
regardless of what it does
to the submarine
that you're targeting.
And this was one
of the great advantages
of Hedgehog,
because not only did it
allow you to project
something ahead
while you still had
a sonar contact
or ASDIC lock
on the submarine in question,
but the charges
were individually smaller,
contact detonation only.
So when they hit a sub,
they could do damage to a sub,
but the detonation
wasn't anywhere near
strong enough to travel
through the water
and do damage to the ship
as well.
Later on,
when you get launchers
like Limbo or Squid,
which were considerably
more powerful
than a K-Gun or a Y-Gun,
you could project
a full-size depth charge
over the ship
and at a submarine
dead ahead of you.
But whilst some
of the early versions
of those launchers
were coming in
towards the end
of the Second World War,
they were quite big
and quite heavy
and not really suitable
for a frigate like Diamantina.
And so that wraps up
our quick look at Diamantina
in the Queensland Maritime Museum
over there in Brisbane.
I do definitely
recommend a visit.
We've still got to cover
some of what they've got
in the museum building itself,
some of the other ships
that they've got on display,
like this little light ship
that sits in the aft end
of the dry dock
behind Diamantina,
as well as a Pearl Lugger.
There's quite a nice
little interview
with one of the staff
who knows all about that.
And I was also lucky enough
to be able to sit down
for about half an hour
and chat with the museum director
about the museum in general
and some of the direction
that it will have going forward
and some of the challenges
they face.
So all of that to look forward
to in future videos.
And of course, huge thanks
to the staff at the museum
who made us feel very, very welcome.
And to all you subscribers
who came out and said
hi at various points,
including all of you
who came out to the dinner
with subscribers that we did
after our first day at the museum,
which was actually in a restaurant
just over to the left
of where we took this photo,
which also affords
a rather nice opportunity
to take a photo of Diamantina
at night, which is
what you're seeing here.
So I hope you've been
enjoying these looks
at the Australian Maritime Museums
and their heritage
that they've been preserving.
And as I say,
doing a better job, frankly,
of preserving various elements
of British and Commonwealth
naval history than we managed
to do in the UK at various stages.
But nonetheless, plenty more
to look forward to.
There's more stuff coming
from Perth and Melbourne as well,
because we got quite a lot done there.
And then once we've wrapped up
Perth, Melbourne and Brisbane,
we then move on to Sydney.
And oh boy,
if you think there's a lot of stuff
that's come out
of those other three cities,
we spent the better part
of a week in Sydney.
That's it for this video.
Thanks for watching.
If you have a comment or suggestion
for a ship to review,
let us know in the comments below.
Don't forget to comment
on the pinned post
for dry dock questions.
