TUTORIAL BUKET BUNGA MAWAR ARTIFICIAL SIMPEL MODAL Rp.30.000 WRAPPING 2 LEMBAR KERTAS CELLOPHANE

FLOWER Gift
79 followers
Comments are disabled for this video.
Hello Assalamualaikum, back again with me NixCraft
This time I'm going to make a simple bouquet like this
It only cost Rp 30.000
Let's watch the tutorial
As usual, I'm using a styrofoam
I'm using a 1.5 cm thick styrofoam
The size is 10 x 7 cm
I'm using 3 layers
I usually use 3 or 4 layers
I'm using 3 layers because I don't have a lot of flowers
Next, I'm using a cardboard
I'm using a 20 cm thick cardboard
I'm using a cardboard for the bottom
I'm using a paper for the top
This is the bouquet
The bouquet has 12 flowers
This is the red color
This is the filler flower
The color is greenish brown
I'm cutting the flower from the main stem
I'm cutting the flower lengthwise
You can adjust the length
I'm separating the flowers
For the flower with filler and leaves
Or the flower without filler at all
So that the flowers are evenly distributed
Next, I'm arranging the flowers
You can see how I arrange the flowers in the video
I'm still learning how to arrange the flowers
First, I'm putting 3 flowers
For the top, I'm putting 4 flowers
For the top, I'm putting 3 flowers
For the top, I'm putting 2 flowers
To make it stronger, I'm putting glue
Next, I'm wrapping the bouquet
I'm using 2 sheets of cellopane paper
I'm cutting 6 pieces of the first sheet
I'm cutting 2 pieces of the second sheet
I'm cutting 3 pieces of the second sheet
I'm cutting 4 pieces of the third sheet
For the wrapping, I'm using tissue paper
I'm cutting 4 sheets of tissue paper
I'm folding the tissue paper
Then, I lock it with solace, and then I put it back with solace
You can see how to do it in the video
For the braping, this is the first layer
I take the one without the side list
The list is only the top one
I adjust it with the height of the bouquet
The right and left sides are also adjusted
Then, I put it directly with the solace
Next, for the second layer
Just fold it now, like in the video
Then, I put it directly with the solace
For the position of the solace, the second layer
It fits perfectly with the side list
It doesn't go to the front
To make it neater, I put the solace on the top of the back
Do the same thing for the second layer on the right
Next, for the second layer
You can see how I fold it
After you fold it, you can check it from the top
To see if the curve is the same or not
So, it's a little bit up
So, when you put it on the handle
The position can be a little bit up
For the position of the solace, I put it on the bottom
So, the top part can bloom perfectly
Then, just adjust the position
While pressing on the middle part
When you get the right position
Then, put the solace on the bottom part
For the position of the solace, it's already on the front
On the front of the handle
Then, I put the solace evenly on the back
So, there's an effect of pulling
Or you can use a rope
Do the same thing for the right side
So, every time I fold it
I check it from the top
To see if the curve is the same or not
The steps are the same
If the solace is on the front
Then, the solace on the right is also on the front
So, it's the same
While you check the top part
To see if it's the same or not
Next, for the fourth layer
Do the same thing
The position of the solace is in the middle of the handle
So, it will be connected to the right side
Even though I've wrapped it many times
Sometimes it's still hard to get the same layer position
Because sometimes it's hard to adjust
It can't be the same right and left
Okay, it's done
Four layers and four sheets of paper
And for the last sheet
Which is 1x6 size
This is used on the back
To cover the back to the side
And the last four small sheets
Just fold the creewheel
To cover the handle on the front
Just arrange the four in the front
For the bottom part
It's a bit too long
It can be cut or not
It's up to you
Make sure that the cardboard on the front
Can't be seen
Arrange it so that it can float like a rock
And don't let the cardboard be seen
If it's done, just add the ribbon
I tied it first using a light brown ribbon
For decoration
And for the last one, give a double ribbon decoration
I've shared the tutorial before
You can check it in my previous video
Or you can check the link in the description
I've written the link there
I use the first method
Because it's more practical and simple
Okay, it's done
Simple bouquet ala Nyx Craft
Just Rp30.000
You can sell it
From Rp60.000 to Rp90.000
Multiply by 2-3 times
Okay, thank you for watching
Don't forget to subscribe, like, comment
And share to your social media
Thank you and see you!
