DIY Pond, DONE. (Fish ADDED!)

Nature Fish Tank
87 followers
Feb 17, 2025
Today I'm going to be completely finishing this DIY pond with lighting, landscaping, a heron net
and more. But first, in case you missed the last video, a quick recap. Because we did a lot. From
taking out the old pond, putting in the new pond, insulation, cladding, DIY filtration and planting.
And it has now been about a month since that initial setup. The water has stayed crystal clear,
the plants have been growing in nicely. In particular, the parrot's feather and the
watercress are doing really well, having almost completely covered the edges of the plant basket
we use. Also, a couple of the water lily pads have reached the surface. And as you may have noticed
from the intro shot of the pond, the fish have been added. And that's because I wanted to add
them gradually so as not to overwhelm the filter and allow it time to grow the beneficial bacteria
required to deal with the fish waste. So I started out by adding three small fish about a week after
the initial setup. I then added three more a week after that. Then a further week later after that,
I added the final three, bringing it to a total of nine goldfish, which I think is a nice number
for a pond this size. Now I did make sure that they were all properly acclimated to the pond.
And I also added some Evolution Aqua Pure Filter Start Gel directly to the filter, which contains
live beneficial bacteria that will help seed the filter media and hopefully prevent any ammonia
spikes that can sometimes occur with a new pond setup. So now that we're all caught up, the first
thing I want to do today is to add some lights, allowing the enjoyment of this pond to continue
after the sun has gone down. And these are the lights that I shall be using, the Oase Lunar Aqua
Classic LED. And it's a set of three lights, and it's actually the exact same light that I used on
my above ground mini pond. And that's been working now for a good 18 months with no issues whatsoever.
And I'm keeping the placement of these lights pretty simple, and just putting all three along
this front edge of the pond. And once securely screwed into position, it was time for some cable
management. Now I'm going to be adding some more lights in a bit, so we'll have a look at what they
look like after dark later on in the video. But for now, I'm going to be moving on to the herring net.
And I actually made this net a couple of weeks ago, because I just couldn't put up with how messy
the temporary net I was using looked. And I'm making it in a very similar way to how I made both
my marginal planting shelf and the pump stand that I made in my previous video, by using PVC pipe and
various elbows and T-pieces. By using these, I'm hoping to make something that will not only be
lightweight, easily removable and hard-wearing, but also not too bad to look at. So once I put
the framework together, I put it into position to make sure it all fitted. And it did indeed fit
nicely. However, it was bowing slightly. So I added a couple of bits of leftover filter grid,
cut to size and zip-tied into position, which sorted out that little problem nicely. I then
decided to add another piece of leftover filter grid to this window here, because I just thought
it'd be easier than trying to put a little piece of netting over it. So once that was all done,
it was time to stretch the netting over the framework. And this is where it all started to
go a bit wrong. Because as it turns out, it's actually really quite difficult to stretch netting
over a frame like this, and zip-tie it all neatly into position. But I did spend some time trying,
and even tried a second slightly different net, thinking that might be a bit easier. It was not,
and ultimately I did have to admit defeat on the net application. But I still needed some sort of
heron stopping device. So I headed out to home base in hope of finding something that I could
use, and stumbled across these. These are plastic coated metal grids, and they fit perfectly on my
pvc frame. And once zip-tied into position, I was happy with how it looked. It was nice and neat,
and yeah sure it doesn't look amazing, but it's going to protect the fish, it's going to last,
and it's easy to remove from outside enjoying the pond. So now that's done, we can get it out the
way and move on to some landscaping around the pond. And I'm going to start with a bit of bamboo.
Now I actually bought this bamboo originally to use on the pond itself, like I did with the
above ground mini pond. But decided against that in the end, so instead I'm adding it to a couple
of the fence panels behind the pond. It's just going to give the pond a bit of a nicer backdrop,
and hopefully a bit of a tropical stroke holiday vibe. And yeah I just stapled it into position,
doubled it up at the bottom, and just used up what I had available. Once that was done,
and I was happy with how it looked, it was time to move on to some more landscaping type things.
And up first, I've got this nice batsia plant that I repotted in a nice terracotta plant pot.
I'm just going to pop it in front of the mechanical filter, and again with this,
I'm just trying to create that tropical jungle vibe. And with that in position, I could bring
our boy Ron the heron in. And Ron's going to help deter any other heron in the area from attempting
to steal our fish. Although with the net we've made, he shouldn't really have too much work to
do. With Ron in position though, and as I mentioned earlier, I want to add some more light. So I went
on Amazon and bought these. And these are just some fairly cheap outdoor string lights that are
apparently not just shatterproof, waterproof, and dimmable, but also come with a remote control.
I'm just going to hang these up using some small hooks. And just as a bit of an extra safety
measure, I do later on use some zip ties to really secure them into place. And as you can see,
I ended up extending these right along the fence line, and around the corner, almost reaching the
above-ground mini pond. So with the lights hung, I unrolled a seriously holiday vibes outdoor rug,
and positioned it in front of the pond, completely covering the little mistake I made when cutting
the deck. Next up though, and after literally months of waiting until this project was completely
finished, I moved in the garden furniture. Now that's in, I'm going to sit myself down and wait
for darkness to descend, so we can see what the pond looks like at night with the new lights that
are now in place.
