Clay Swan Sculpting Video Lesson

Eternal Sculptures
211 followers
2 Video ViewsยทFeb 16, 2025
I'm going to make a swan today. I'm using earthenware clay. It looks gray now, but after it's fired in the kiln
it becomes white and bisque. So what we'll do is we'll start with the swan neck and
head. What I'm doing is I'm rolling out
the neck and I'm leaving, you'll see, I'm leaving this uneven area at the end. That is going to become the swan
head.
So I want to make sure I get rid of any weird knuckle marks.
Smoothing those out for a nice sleek extended neck.
There, that looks good. I'm happy with that. I'm going to smooth out anything that bugs me. With a dry dusty finger,
just smoothing over the surface, I can clean that up quite nicely. And then I'm going to bend
gently,
smoothly manipulate a little arch in the neck and then draw
forward
the beak from the head.
Now I'm realizing, oi, this is a really long beak.
I don't like that, so I'm going to get rid of that and I am going to smooth a new beak forward.
With such a gentle touch, I'm making sure that I'm not squeezing the arch in the neck
while I'm doing this.
Really gentle.
There we go, I'm a little happier with that now. Let's see what she looks like.
Yeah, that's gonna be sweet. Okay, but this is kind of soft. It's kind of wimpy. It wants to fall and slope so
I'm going to leave that rest for a little bit while I take some clay and
make the body. I have to decide
how much I want. I need a little bit more. Yeah, that's better. Again,
I'm going to roll around and around and around to smooth in any rough edges that are on the clay.
So now I've got it all rounded in and
I'm going to go back and forth, back and forth, tapering where the neck will come out and tapering also
where the tail of the swan will be. I'm going to draw that out and extend that
to define a sweet pointy tail at the end.
And again, dragging my finger over the top.
See how slow and nice and smooth you can go? And that smooths out any creases and wrinkles
so gently.
Not pushing hard because that'll dent the clay. Now, I'm liking that shape.
And I can picture that this is going to look good together.
This is too thick. It's thicker than my thumb right now.
So I'm going to take, you can take the handle of any tool you have or the handle or the end of the pencil,
push it up inside and that will hollow out
the inside of your swan body or any sculpture you have to keep it from blowing up in the kiln.
So any, if you've watched any of the other videos I've done with the homemade play clay,
you can do any of those sculptures with earthenware clay as long as you hollow out the inside.
There we go, okay.
Hollow out the inside to make sure that the edges aren't thicker than your thumb, okay?
So that's lining up nicely. It's looking about the same thickness as my thumb. So when we put this together,
it's going to look really cool. But it still needs to rest a while. While it's resting,
I'm going to make the swan's wings. Rolling it around, smoothing in those edges,
tapering one side of it, a kind of V. Do you see that V shape I'm making with my hands while I roll?
Kind of leaning more to one side, leaving this nice and round because then when I press it flat,
like the swan's wing would be, it keeps a nice peak but a nice rounded side.
And I'm going to do that again for the next wing. Of course you want it to be about the same size,
so kind of eye it up. Rolling it around and again taper one side, shaping a peak,
and then flatten it into a nice even wing shape. They should be the same size. If they're not,
it's really easy to take some off and re-smooth. Line them up. That works. Those are quite consistent.
All right, so now if I remember correctly, swan's wings have kind of a
peak sticking up over their body sometimes. Sometimes it's right in, but I love it when
their wing is peaking up over their back a little bit. I think it adds a little more elegance.
So to keep those in place, I'm going to score and slip with my wire brush. Dip the wire brush in
water and scratch up the surface. Get it nice and gooey and that will make a nice secure attachment.
Anything left you can smooth away. Look, I just have a pencil here. I'm just going to smooth that
away. Get rid of that excess slurry. Now I'll scratch with the other wing.
Line them up. Look at it from the front. Look at it from the top.
Make sure that everything is lined up. Looks like some sort of a plant right now, but that will
change. I always like to, oh my goodness, since I was a little girl, I've always done the spiral
inside my swan's wings. I think my grandma taught me that.
Same thing on this side. Just a soft line for the glaze to fall into.
And I'm adding color. And where that line is, the glaze will get deeper in richness of color.
There we go. All right, so by now I'm hoping that the neck has had enough time to rest and firm up.
Yeah, it is a little bit better. Okay, so I'm going to handle it a little bit
and I'm going to make little eye sockets. I'm using the tip of my pencil to push in little
eye sockets and that makes little tiny subtle eyebrows as well. The idea then is to make
super tiny eyeballs that will go inside and the eyeball should match. One's too small,
so I'm going to add a try another one and see. Oh, that doesn't work either. Let me try another one.
I do this all the time. Make about five eyeballs and then finally pick two that look alike. I like
those two. So I'm going to take my needle tool, drip a tiny bit of water inside the eye socket,
poke the eye, ouch, and drop her in. There we go. And put a drip of water in there,
poke the eyeball, ouch, and drop it in. There we go. And then define that line that comes from the
eyes and that again will create a nice easy line to follow when I'm glazing. I love that line.
It's like natural eyeliner on a swan. There we go. A little bit. Come on. There we go. Cool.
All right. So now this is when the test is going to reveal itself and whether or not it's
the neck has rested long enough to be strong enough. I'm going to score and slip the body
where it gets attached. Score and slip the base of the neck and gently smooth it on. I am not
pushing hard. If I were going to push hard here, it would pinch it really thin and then the head
would totally fall forward. I'm just gently applying it. I scored and slipped it thoroughly
so it's going to stay. All right. I hope you enjoyed. Thanks.
