Kabar ESEE Becker BK 24 | D'Eskabar Sheath Mod

Tactical Military Gear & Gadgets
4 followers
13 Video Views·Feb 6, 2025
Krik of Black Owl Outdoors shows you the mod he did for his D'Eskabar by Kabar, ESEE & Ethan Becker. Krik wasn't too thrilled to wear the BK24 around his neck, so he crafted a leather backing for the sheath enabling it to be worn on the hip.
With some tools, time, and material, we're only limited by our imagination.
All right so let me back up for a moment. Here is the Ka-Bar Becker SE, sort of Frankenstein's
monster of a knife. I've done a video on this if you've seen it. You know I was not super
content with the sheath. This is the stock sheath, hard plastic, and you know meant to be used as a
neck knife. I really didn't want to use it and haven't used it as a neck knife so I was proposed
with an opportunity to make some mods to this sheath myself and that's what I've done and I
want to share that with you today. So let me start grabbing all the components for these mods that I
did and I am super super happy with the way this turned out. There's a ferro rod. What's that?
What's that? What's that? Well that's the hardware. So now I want to assemble this but before I start
assembling I just want to talk a little bit about what I did. This is all made out of roughly eight
to nine ounce leather, veg tan leather, which I hand dyed. All this leather was completely
done by hand which is always nice to do that. I did have to actually split some of the leather
down to make it thinner in certain places but I'm not going to go into great detail about how I made
this but part of me wanted to do this was to see if you are interested in actually seeing, you know,
if you want to see me do these sorts of projects we could figure it out if it's really really desired.
I need a flathead screwdriver for this and conveniently there's one on this wanger ranger.
All right so now I need to get out a couple of these screws. Some people call these Chicago
screws. I think at Tandy, I did buy these at Tandy, but I think what they call them is like a post and
screw. I'm going to get out four to start. I hope I don't drop any of these and I'm going to unscrew.
I'll show you, I'll show you a close-up what they are. If you have your screw here then your post
which is threaded and one side's nice and clean and the other side obviously is for the flathead.
I use six of these total so I'm going to get these first four
unmarried, unhitched. All right let's get the first piece going.
Actually I had a little bit of a clearance issue so I'm putting these two on first.
Next I'm going to put on the back plate if you will.
Flies are out today, tickles my hand.
Come on.
Okay, got that all lined up.
Back up.
Going to stick the screw through here and try to get that to meet the post there.
I think it'll be a little bit easier.
Yeah.
All the difference.
Hand tighten that one for now.
All right, final screw.
All right, take a look at it.
Almost nearly complete.
Take a look at the ferro rod loop.
You can see there's a little bit of, a little row of stitching right here.
Black Owl logo stamped in there.
Bam, looks real nice.
I'm so happy with this.
I'm so happy with this, how this turned out for being my first attempt.
Just the holes, the configuration of the holes in the stock sheet just lent itself for me
to be able to do these mods.
If they weren't in that configuration, I wouldn't have been able to do this, but some things
just work out.
I do have this sewn just to keep it a little bit more of a structure, and it is contact
cemented down here.
All right, let's put the ferro rod in the loop now.
I did make it large enough to accommodate these larger diameter fire steels, and it's
really tight at the moment, but through time that's going to wear down, so I have a piece
of shock cord on there to keep that flush, or keep that nice and tight in there.
Bam.
Look at that.
Look how handsome that looks.
All right, let's get the knife in there now too.
Check that out.
That is sexy.
That brown and black just looks so nice.
I'm very proud of myself for this.
I really like the way it turned out.
I really did.
To me, it's completely just took this custom stock setup and just completely made this
3,000 times better in my opinion.
I will put it on the belt and show you what it looks like, but just having the hard plastic
with the leather, the natural material, softening that all up and completely changing the utility
of this rig, oh man, I'm really, really happy with this.
It's not my cleanest work with some of the leather down here, but I'm super, super happy
with this.
I really am.
Let me know what you think, but I'm going to get on my belt now and just show you how
it rides.
If you're going to continue watching, you're going to have to pay.
Doesn't that just look so nice sitting on the belt?
I am very enthusiastic about this.
I'm really excited to start using this now.
Rides just low enough that this handle's not going to poke me in my love handle.
The lanyard really comes in handy too.
Grab that and I use just actually the belt and the loop on the sheath itself as a thumb
ramp to get this out of the sheath.
Best of both worlds.
I hope you enjoyed this video.
It was a really fun project for me.
Like I said before, let me know if you're interested to see these types of projects,
because when we started doing Black Owl, we decided we want to do everything outdoors.
We felt there was already enough people doing tabletop reviews, doing things indoors.
We want to do everything outdoors.
But if you really want to see these projects I do at home, let me know.
If there's enough desire, we'll do that.
So thanks for watching, and this is Crick signing out with Black Owl Outdoors.
Later turtles!
