Thank you, to all my HWM YouTube Community for all your support and I will see you all soon. Thank you, HWM by, Lori. Find you when i will be live https://bit.ly/33x7Oyf
Affiliate links for tools used. If you purchase i will get a few pennies for the purchase. About enough to buy a stick of gum :) It will not change the amount you made.
[Music]
hey I'm Lori welcome to my Channel today
we're going to do something so fun so I
saw this done Years Ago by this Southern
girl can and I have not done it in a
really long time but it's so cute we're
going to do our own take on it it's a
mermaid scale
wreath and so we're going to need to
Wood burn our edges just cuz it's going
to make it look a lot nicer and so I'm
going to show you how to Wood burn and
then I'm going to show you how to put it
together so it's going to go together on
a Dollar Tree frame and we're going to
use several different colors of mesh so
I'm basically just going to use um
partial rolls for the mesh so this is a
great project to do with some of your
leftover mesh especially if you have
different colors
so let's get started so to do wood
burning you're going to need to have a
tempered
glass uh just cutting board works fine
try to find one that doesn't have the
little ridges on it and then a wood
burning tool this is just an inexpensive
wood burning tool you can get them at
Walmart or Amazon there'll be a link to
one in the description I like to use my
hot shot from Susie's re and things just
because it's so easy to drop these and
burn your carpet or your floor so I keep
playing on my hot
shot and you're going to need something
to measure so we going to do several
different colors just because it's going
to make it look really
pretty
okay so this is um this is Deco poly
mesh I have it in several
colors I will put it on my mesh
roller it's just going to make it a lot
EAS
easier so one thing you can do is on
your glass you can look at your line and
Mark
it and then you don't have to keep it
you know in the same space and if you
measure it ahead of time then you don't
have to look and think about it you can
just go to your mark and just go down so
all you do is take your tool and start
running it down the mesh and you can see
it just burns it as it goes it's cutting
it and burning
it okay what this does is it's going to
prevent it from fraying so you see how
nice that edge is so that's the factory
Edge these are the factory sealed edges
on the
side okay so I'm going to go through
and cut some of all of the
colors doing the same exact thing now it
doesn't matter which tip you use I like
this one that has the Little Hook but
all of them
work but you want to cut them at 10 in
so you want a
10 by 10
piece if it's just slightly over that
it's not going to be the end of the
world world this is not a
petal so it doesn't have to be
absolutely perfect you just want the
edges burnt so you don't have to worry
about
them
okay so I'll get all our mesh cut up and
then we'll go on to the next step so I
have a whole bunch of different ones
that I have wood burned and at 10 in
I have several different
colors is I want to make it like a
mermaid so I want there to be a lot of
different
colors the next thing you're going to
need is some pipe
cleaners and I'm going to cut them in
half okay and we're going to put about
10 in each section so that's going to be
60 in total that would be for five of
them 12 if you did four it would be 20
you can just take the 60 divide it by
the number of mesh and it'll tell you
how many you
need you're also going to need a 14 in
wreath frame from the Dollar Tree if you
want to use a different one that's fine
but you want one that's flat okay so you
can see how flat this is so work wreath
I don't think would work for this you
really want it to be a flatter wreath
base okay
and so what we're going to
do is we're going to take our
mesh and we're going to kind of ruffle
it right up the center okay like
this now I have the cut edges kind of as
the ruffle the woodb bur edges are the
ones that's going to be inside
so I can just take my pipe cleaner put
that
around what you're going to do is take
this piece and you're going to move it
to be on top of this piece okay so I'm
going to go to my frame and I'm going to
tie my pipe
cleaner in between the two now you could
also do your p P cleaner put it
in tie it like
this and then
do your
ruffle
okay tie it
down so either way you want to do it if
you want
to put it so that your pipe cleaner is
coming out the bottom that works or if
you want to do it so it's coming out the
top either way works and what you're
going to do is you're going to push
them together and you're going to kind
of lay them on top of each other and I'm
going to kind of vary it a little bit so
that it almost looks
like scales see how it's kind of
starting to go back and forth
you could do multiple of one
color together or you could really
spread them out it really just depends
on what you want it to look like but
it's fun to just kind of play with
it we can still use our
tool I kind of
think that it's a little better if you
take your pipe cleaner and put it on the
bottom for one I want to make sure that
my pieces are pretty close in
size
okay and I think pulling it up and doing
it like this is going to make it a
little bit easier to twist that piece
and get it to go on top of the other one
like
that okay so you can do it either way
and then you just take
it and tie it
off okay now you kind of want it to be
like it's on top of something like it's
a bubble so you could take some ribbon
and just put that and then just kind of
get it started a little like this
so I kind of want it to look like scal
so that's why I'm kind of moving my mesh
back and forth so they're not all
uniformly like this because that's not
how scales would be okay all right so
I'm going to keep doing this I'm going
to do 10 in a
section so let's
do this one
you could stick with all of the
same right so just solid colors or you
could mix in like I
am which I think what I want to do is
mix this
in kind of in the middle so maybe what
I'll do is go in between between the
blue and the
green I put this one
down okay tie it down all right and then
I'm going to
do my little scales like that and and
then put these scales back so you see
how it's kind of going back and forth I
think that looks a little bit more like
scales to
me but you can do it any way you
want there's no rule
here okay then we
have this
one I really like this one this is a
basket
weave
okay the biggest thing is to make sure
that they're
even so that is probably one of the
reasons why would be good to put it in
the tool just to make sure you're
getting it even on each
side
okay then pipe put your pipe cleaner on
I like to hold it up like this and tie
it a little bit
tighter okay and then I can take
whichever side and pull it across okay
and then we just take
this we tie it on the bottom
if you really really want your colors to
show okay what you can
do see and one great thing about this is
you're going to be able to move these
back and forth if you want to make
changes so we can do two of each
color so let me show you what that looks
like all
right all right so right up this
Center
okay our pipe cleaner on let's make sure
it's
even there we go doesn't matter which
one we
flip so you see how vary them like that
kind of makes it look more like a
scale so if I push these
back and
put a second pink
here then you'll see it'll make this
pink a little bit stand out a little bit
better
okay so I'm just kind of giving you
options
here there we
go okay so this is how
um this Southern girl can did hers she
kind of had two at once I do like
that because I think it does make the
color kind of stand out a little better
so let's keep trying
that
okay okay so straight up see and then I
can make sure it's even on the
sides get
my pipe cleaner in
there if I need to adjust
any okay that's
good if I have one that's slightly
longer than the other I will put the one
that's a little bit longer on the
top so you see how you just kind of
twist them over each other that's why
that burn edges are important because
when you're messing with mesh the more
you mess with it the more it's going to
fray and so something like this you're
going to have to adjust it some
and
so it could cause it to
fray you can also use a bag
sealer okay so we're just going to keep
kind of going back and forth on
this like this see how I'm kind of
pulling one to one side and one to the
other side and if I see it's starting to
kind of fall down I'll just kind of put
my little thing up there that's just
until we get around as we get around
it'll start holding its
own okay let's do the purple
one
okay it's not going to matter what pipe
cleaners colors you use because you're
not going to see
those and we can we can fix the bottom
which I will show you at the end
okay so pick it up and just twist it see
how I have it twisted one on top of the
other okay let's put this one
in
okay and then I just want to alternate
them so we can see that kind of scale
pattern
okay let's do a second one of this one
and then once we get past this I'll go
ahead and do the others off
camera okay the important thing to
remember is that you want the factory
edges to be the thing that's standing up
up
here okay that
way it's all nice and neat and nothing
nothing is going to look messy or
frayed
okay I like to go ahead and move it
before I put it on I think it is a
little bit
easier and then I'm just going to
go right
down okay
so we have
five different colors here okay so that
means that we
have let's go this way that means that
we have about we're going to have 10 in
this
section there we go okay
so we need one more in this section and
then I'll start working on the
others okay I I'll just do this one by
hand see how easy it is if you pull it
up like that to make sure that they are
even then you can flip that one over
see if we didn't have burnt edges it
would definitely be frying by
now okay so they are going to be snug in
here but I do think that it's really
going to make it look great if we have
it snug like
that so it's really going to keep that
bubble that's what we want is we want it
to keep that bubble shape I don't think
you could get more than 10 in because
that is 10 right there so you can see
that's really full in a section but it's
going to look really good so I'm going
to go off and finish this and then I'll
come back I'll probably show you the
last little bit and then we're going to
put probably a really cute side in the
middle so I've gotten all the way around
I have one left to put in so I thought I
would put that
in uh with y'all
so it's this one right here but look how
cool doesn't that look like scales it
really does uh so one thing I discovered
um if you will go ahead and put it in
the shape that you want it and kind of
just curl it around and then put it in
it does make it a little easier on this
last one I'm just going to kind of pull
this
back put this
down all right so tie it over the two
bars
okay we go and then I can spread it
out there we go all right last one all
right so how I did this to make it just
a little bit easier
is when I got it together
when I got my ruffle and I grabbed my
ruffle I went ahead and pulled this over
like
that and then I put my pipe cleaner on I
kind of discovered this about halfway
through and I think it does make it a
little bit easier and it stays a little
better if you tie it when it's like this
so then you
can kind of push underneath to get that
will
bubble
okay let's put this one in then we'll
take a
look okay
there we go
now this last one gonna kind of Pull It
Forward kind of spread these out a
little just to get it kind of
even
okay this is where we ended off so I
think we just need to pull these a
little there we go look at that that is
really cool
looking you might have tojust a couple
little things but since we wood burned
it there are no frays look at that
nothing okay so this is cool this is
really
cool all right so I was
thinking this would be really
cool right in the middle oh that's cool
so I kind of made this sign to kind of
match the mesh colors I had cuz I
thought it would be super cool um I want
to grab an 8 in as well and see how that
looks and see if we like the 10 or the
eight better so I'm going to grab that
and then I'll be right back okay so I
grabbed an 8
in oo I think I might like
that all right
so H that's the 10
in that's the 8
in I think I kind of like the 8 in just
because it might show a little bit more
of the
scales but you can see you could do
either
size so it would just
be you know deciding whether you want to
see more of the scales or not but I like
this I think we're going to do the 8
in
okay so just to kind of review we have
60 10 in pieces of mesh on here five
different colors
so five different
mesh okay so that would be 600 in it
would roughly kind of be around
two total rolls of mesh so if you had
several rolls of mesh you should be able
to make multiple of these with one
roll depending on how many different
ones you
use okay so we also used pipe cleaners
and the Dollar Tree
frame all right so we're going to poke a
hole and the top and the
[Music]
bottom okay then I got some 26 gauge
wire just going
to that
through hey Bly okay double it
up I'm talking to my
dog
okay all
right there we go all
right oh that's pretty I'm actually
going to just sneak it in
between some of these pieces like that
and then just kind of hide it so that's
where our wire is I can actually kind of
pull it here and tie it on the inside
here there we go so I just wrap it
around now I didn't trim off any of my
uh pipe cleaners but you certainly can
there is something you can do to just
kind of hide
that okay now let's do the other side so
I'll just kind of
sneak that wire in between those
layers all right so the wire is very
thin so it's pretty easy to kind of
sneak through something like
that
okay want to make sure that I have it on
there snug enough so you want the sign
to float on there but not squash
anything okay so just twist it around
Trim It Off
so you could cover the back um with felt
with ribbon and someone suggested
getting the carwheel covers from the
Dollar Tree and those work I know I have
one but I couldn't find it so I think
that would probably be a great
idea all right so let's look at it okay
there it is how cool is that that is so
cool and
pretty if you see any little places just
kind of you know fixed them but for the
most part these came out so great look
at that whoops
there how fun is
that awesome well why I hope you enjoyed
this let me know what you think and be
sure to like And
subscribe and come back cuz we will be
putting up more content and of course
we're going to be going live on Fridays
so we hope to see you there there thanks
so much for watching bye y'all
[Music]