How to Whittle a Simple Bird - Step By Step Beginner Wood Carving Project

Carving Art Channel
11 followers
3 Video Views·Jan 15, 2025
Arts and Design
Hey everybody, this is Brian from Carving This Fun.
In this tutorial we're going to do a quick and simple little bird.
This bird is great for beginners looking to get into whittling and it can be easily modified
to fit any other kind of bird design you want.
All you're going to need to do to do the project here is your preferred whittling knife.
This is my Helvy knife right here, a great knife, your pencil, and a piece of basswood.
This is a 1x1x2 inch piece of basswood and preferably some slicers and resistant gloves
and some thumb guards to protect your fingers.
And since I'm probably going to be whittling faster than you guys, I'm going to have the
current step on the left hand of the screen over here so we can keep up with the current
project.
I'm going to put the template on the screen here for you to copy.
Go ahead and pause the screen and use your pencil to trace the lines on your piece of
wood here.
So just in case if you're confused at how to look at this, how to interpret the drawing.
If you look at it just from the flat side, you're going to be a little bit confused.
But the goal here is to look at it at an angle.
Like both of the birds, both inside the block that has been taken out and one carved are
going to be facing the same direction here.
So the beak is right here, the tail is right here, the bottom of the body is right here.
I like to do this at an angle because then I can work with the corners here and I don't
have to carve into the wood and it makes it easier to carve.
So starting off, I like to create the base of the bird which is this flat portion right
there.
It helps index everything.
So this whole line right here at the bottom, we're going to be basically trimming it up
to that line right there.
So flatten off that corner and this is going to form the base of our bird.
Get it as flat as you think you can, it doesn't have to be perfect.
There we go.
Once you have that part taken out there, we're going to start working on the tail.
So you have your base of the bird right here and then we're going to start removing some
of the wood back here for the tail.
And this is just simple enough right here.
Just go ahead and cut away at it, following the lines.
There you go, just follow it up to the corner there and like so.
You don't need to make it perfectly flat at the moment.
This is just removing some wood to make it easier to work with.
We're going to be figuring it out later.
And then we're going to do the same thing with the chest area right here.
So this is the front of the bird.
We're going to do about the same thing with these lines right here.
This is a smaller little wedge like we did on the back side.
Again, we are not looking for perfection at this moment.
We're just roughing out the bird.
And you'll see we made a line here and a line here.
This is kind of representing the front of the bird.
What I like to do at this point is actually take my blade, I'll put one edge of the blade
right here and one edge at the other line right there, and I'll push in a little bit.
I'll create a little push cut.
What this is doing is separating the head of the bird.
So I'm going to put a line straight up and down here.
And what we're going to do is create a triangle right there.
You don't need to worry about measurements.
But I like to create a triangle right there and that's where the beak is going to be.
So you have your chest right here, which we're going to be removing some of this, and then
this is basically your head right up here.
So this is where your beak is going to be and now you have a good idea where it's going to sit.
So going from there, I'm going to remove this back section right here.
This is basically the back of the head that I have set right here.
So this line right here is representing the back of this head.
Now if you were going to be doing something like this bird right here, you probably want
to make it more of a slight sloping downward shape to it.
So adjust this part to what kind of bird you're going to do.
This is kind of like a little miniature blue jay or something like that I'm doing.
So I'm going to create a stop cut going down to about where that line ends and then I'm
going to come back into it right here and remove that little section of wood.
It makes it easier.
I have a little section of wood I can now start working with and get my blade in there
and start removing the large section of wood.
So I'll get it in there and remove it.
Again we're not trying to get it perfect here.
We're just roughing it out, getting the general shape of the bird.
Alright, so now you can start seeing some of the bird shape coming out and now we're
going to start working on the front end over here.
So making it more comfortable, what we're going to do is starting about maybe about
halfway along this line here or this head portion just for what I have right here or
maybe just a fourth of the way up on the head here so about a half an inch.
I'm probably just going to create a little divot right there with my knife so I can reference
it and then I'm going to cut forward cutting this corner off here.
This is going to be shaping the head so we have more of a taper going towards the front
here.
And then we're just going to remove a little bit of the wood right there.
Not too much in there just yet, just removing large sections of the wood at the moment.
And then we're going to do about the same going towards the back.
I don't like to do it starting at this point, maybe just a little bit further like halfway
down across the wood so about an inch from back to the middle here.
And then I'm going to do about the same thing.
This is tapering the tail end.
Don't take in too much just yet otherwise you're going to be coming up with more of
a skinnier tail.
If that's what you're going for then that's fine.
And then at this point I'm just going to take off these sharp corners right here so it's
a little bit easier to hold onto and there's nothing poking at your hand.
Alright and then now we're going to go again from about half an inch right here and we're
going to shave it not all the way down to the tip but I'm going to do it at an angle
maybe to about halfway right there.
So half an inch and I'm going to create a little sweep and cut and then I'm going to
remove this top section.
There you go.
Now you have kind of your basic outline for the bird.
Alright and then at this point I'm going to start working on the chest and head area starting
to outline that.
So what I'm going to do here referencing this line we made originally I'm going to do a
push cut in at an angle.
So kind of doing a push cut in right here and then cutting up at a slight angle here
leaving the head more intact and just working on the chest portion.
So again do a push cut right there at a slight angle and then we're going to push up towards
that push cut that we made.
This is going to remove some section in the chest area and then we're going to do about
the same thing right here.
So now we got some of the beak starting to be formed there and then we have a very blocky
looking chest.
What we're going to do here is just take it back down make it so the chest doesn't stick
out as far as the beak.
Now at this point we're going to be cutting across the wood grain which is going to be
kind of difficult if your knife is dull.
Just take it slow you might not be able to take this off as much as I am right now just
if you need me just take little slivers like this off slowly.
It's a little bit safer that way that way you don't have to put so much pressure on
the blade.
This is going to be a bit of a tough cut.
I'm going to start rounding it out a little bit here.
We're going to leave it a little bit blocky at the moment.
That's primarily because we're not going to focus on getting it all the way smoothed
out just yet.
We're still in the roughing phase.
Alright so now we have the chest kind of defined you can see where the head is and the body
is going to be.
So from this point I'll usually take the from the sides right here and bring it into the
edge of that beak.
Just coming at a straight angle right up to it.
Try not to over exceed it otherwise you might take off too much wood and you'll end up with
a much smaller beak.
There you go.
Well you see I have more of a point to the head right there and there's still some that
outline I made for the beak here.
Alright so from here I'm going to take the back of the head that I drew and I'm kind
of going to draw a line from this little section to the back there.
It doesn't have to be perfect this is just a reference line to help us keep track of
our cuts.
Alright so from here I'm going to do a push cut all the way across basically making a
line going to it pushing into the wood a little bit here and then I'm going to come
in at an angle and remove that section and come back at the top.
Basically just create a little wedge cut further outlining that head.
Now I'm going to do the same to the other side.
A little faster that way yeah.
Just create a quick little wedge cut like that and then you can see the head is starting
to become more defined.
I'm going to chop off this little cheek right there make it so it's not a square looking
head.
It doesn't need a very big jaw.
Alright and then now we're going to start working on the head a little bit here.
So this is where you kind of have to pay attention to what you're doing here with the beak otherwise
if you do if you take off too much wood your beak is going to be really really tiny.
So pay attention to where you made that triangle.
We're going to slowly remove some wood but we're carving in and I like a J hook kind
of angle.
So we're carving down and then scooping it upwards.
This is creating a nice little sweep there in the wood so that you don't have to get
fancy and cut at multiple angles just to create the beak in there.
So come in down and then sweep it back out a little bit creating a little bit of a concave
little shape there.
And then from here I just like to remove some of the stuff in the bottom.
Might have goofed it up a little bit there but I'm pretty sure I can fix it.
Eh it's a little bit.
It's fine.
Add an angle and now I'm going to start forming my beak a little bit more.
I'm going to come in from the sides again trying not to take off too much wood otherwise
it's going to be an itty bitty beak.
There we go.
Sweeping cuts forward.
And create a little bit of a point going there.
Alright so at this point we want to create a little bit more of a triangular beak.
We have it shaped out well enough where we can work on it here.
What we're going to do here is kind of do push cuts back into the wood and straight down.
Alright so let's create that beak a little bit more here.
So what I'm going to do is come back just a little bit create a little bit of a triangle
going back into the wood and then I'm going to come back and very carefully use that stop
cut I just made and create a beak.
Very very quick beak.
I'm going to smooth it out here.
Get it more triangular shaped.
This part is pretty delicate.
If you have a detail knife available this might be a good use of your detail knife.
This knife right here will do the job.
I'm going to start rounding the head a little bit more.
There we go.
Move this out a little bit here.
And now you got a little little beak going on there around the face and you should be fine.
Alrighty so let's continue on with the head.
Now one thing to keep in mind too my wood grain is going from left to right
or right to left whichever way you want to look at it.
So I don't want to start carving upwards like this too much or I might split off some wood.
So I'm going to be carving downwards to help lower and smooth out that
head a little bit so it's not so gigantic.
So cutting downwards this way and then I'm going to flip it around and then do the same thing
going down the other way.
And then from here what I'm going to do as well is I'm going to find that center.
I'm just going to put a little mark right there because what I'm going to do is I'm
going to line up the center with about right here and create a little bit of a
point on the back of the bird here.
Originally it was a little bit wider but I'm going to narrow it down here just a little bit.
So create a little twitch cut and then come back down and take off that that wood there.
Now I got a point in the back of the head.
Now if you were doing a different type of bird you wouldn't need to do this.
But for this bird specifically I'm just going to do a little push cut into it.
There we go.
From here we're going to start working on the wings and the tail.
So from here I usually like to take this hump down just a little bit.
For this bird specifically it's going to be a bit more of a smoother back bird.
Nothing too fancy.
And then before I start taking off too much I'm going to...
I made that center line right here when I made the head.
I'm going to bring it in a little bit and then I'm going to do a little bit of a...
I'm going to do another push cut in here to kind of separate the wings from the tail.
So I'm going to go in make a push cut into that line.
You can do the same thing to the other side.
All right now that I have the push cut I'm going to come in
at an angle and kind of just separate the different layers here.
I'm going to do this a little bit more.
I like to have a good little ridge definition of the wings.
So pushing it in a little bit more creates more of a depth to it.
Do this as deep as you like for your bird.
It doesn't matter you can do it as shallow as you want.
You don't even really need to do it if you don't want to.
I just think it looks nice when you do it.
All right so there we go.
I'll do another little push cut here.
I took off too much there.
I get for looking into the camera.
If you mess up don't worry about it.
It's not going to be bad.
It's nothing that can't really be fixed.
There we go.
Since I actually took off too much on that side I'm going to even it up
just for the sake of this carving.
Like I said you don't need to be perfect.
I'm hardly ever perfect with any of my carvings.
I just do what looks nice.
Flatten this out.
Create more of a definition.
There we go.
And take that little point down that I made there.
All right so the back of the bird is kind of
defined there with the separation of the wings.
And then from here since the
usually the wings are a little bit wider than like the tail.
I'm going to take in this tail a little bit here.
I'll show you what it looks like
so you have an idea of what you're looking for.
See how the wing kind of comes in a little bit compared to the other side.
So you got wing and then your tail.
That's kind of what you're looking for here.
I'll just round that off.
And do the same thing to the other side.
Side to side.
Making everything nice and smooth.
Pretty good.
Just take a little head there.
And then the tail.
Let's see what do I want to do with the tail.
I think what I'm going to do with this tail is just taper it in a little bit here.
So I'm going to round this up on the sides.
And then start cutting the tip.
You see it's kind of flat and blocky right there.
I'm going to start cutting it up towards the tip.
Get rid of some of this edge grain that you see.
Make it a nice smooth cut.
And then now just smooth everything out.
Which is you want.
And I'd say this is pretty close to being done.
I'm happy enough with that.
It's a cute little simple bird.
Nothing too crazy.
Pretty easy to do.
I think what I'm going to do here is cover it with a little bit of beeswax.
Just for just for fun to make it shine a little bit more.
So yeah this stuff is just basically beeswax based.
Put it on like lotion.
And it kind of seals the wood up and makes the natural colors of the wood shine a little bit more.
You can also paint yours with paint like I have with this guy right here.
This one here I just applied some paint directly onto the wood.
I didn't use any sealers or anything like that.
And it turned out pretty nice.
And then take a rag and buff off the excess.
There you go.
So it's just a little bit shinier than without the wood.
And it was a little bit more protected now.
All right cool.
That's it.
If you like the video go ahead hit like there.
It helps spread around everybody and lets me know that I'm doing a good job.
All right thanks for watching everyone and have yourself a good day.
