Working on old Amarlite Commercial Door Locks in The Old Grocery Store

My Brother Donnie
258 followers
3 Video Views·Jan 13, 2025
All right folks, we are in our new building here. Now Donnie, you said this was a new building,
this one doesn't look new. No it does. I think it's kind of old actually. No it does. Did you
get a good deal on this thing? I did. Oh right, I like it. So this side was the flower shop at
one point, right? This one, I hear, this flower shop. And you've been having problems with the
The door is giving me all kinds of problems. Right here on these,
the way these things come apart, that comes out from there like so.
Now wait a minute, wait a minute. We got to slow down here. Have you ever in your life
worked on one of these? A week ago, I tore that one apart. Not a week ago. You're telling us how
they work, but how do you know how they work? Because I had to take it apart. Because you
took the old one apart. So you didn't go to school for this or anything? Oh hell no.
All right. You take this screw out of the side, okay? Now people, just so you understand,
I just bought this thing brand new and I bring it down here and he just started grabbing it.
He's already taken it apart. Well, I want to make a good video here. To show everybody how it works,
and he just took it out of the damn bag. Okay, see. Now did you read a manual on this or something?
No. We got one? I ain't got one. I ain't got one either. Okay. So show us how it works.
Your lock's got a little swing mechanism. Here's your lock, okay? When you turn the key,
it turns this piece basically, turns it up 180 degrees. This piece comes down and hits that
and it's got to push it down. See where it's pushing it down there? That outside edge is
into there. Okay. Okay. And it goes down and slides forward and comes up and that's what
locks it. And there's a little teeth down here that ride out and in. So basically ours is broke
right across there. That thing's broke. That thing's broke. So it won't unlock and lock.
Okay. So we needed one of these, right? Yes. Okay. So he called me and told me to order one
of these people. So I found it and I ordered it, but I knew he was going to do just what he just
now did. I knew as soon as I brought it down here, he would immediately take it apart.
So what did I do? I ordered two of them just in case I didn't know what I was doing. Now,
he usually doesn't break it. It's probably going to be fine, but just in case I ordered two of
them. Notice he's on that side and I have this one way over here where he can't quite grab it.
All right. So these are commercial aluminum storefront doors. Probably this building was
built in 1962. So these were probably the original doors and windows we do believe.
So this is a 60s aluminum storefront door. The new ones are pretty similar, but there's all
these different companies that make them. So we haven't, we've messed with a bunch of these before,
but we haven't messed with this particular type, which was a armor light arm. What was it called?
So it uses a different setup. Most of them have like a hook that swings out or a bar that swings
out into the doorframe to lock it. This one has a telescoping thing that comes in and out.
This is about like a deadbolt in your house. Yeah. Yeah. This one's more like a regular deadbolt.
So basically these locks, you've got these little indentions in them. You've got three
different indentions. You've got a set screw there. You run these locks in. Get it started
here. And basically you run it in and you can set it at any one of those three locks.
It's the only place you can set it. And you tighten that set screw up and then it won't move
until you put one on the front and one on the back. And usually you put one of these swing
things on the back where you can unlock it by hand. Yeah. You can't really put one of these
on the front and the back because then if somebody's trapped in here in a fire, if they
don't have the key, they can't get out. So you got to put the thumb latch on the back.
So some people think, well, I don't know, it's not as secure. They can break the window. Well,
they're going to break the window. They could just break the whole window and walk right in
the building. So you got to kind of keep this on it so that it's a fire safety thing.
Three old ones. What does that mean? How'd you get three old ones?
Because there's only two doors. Oh, they must've had a lock on the back of one of them.
They had a lock on one of them. Uh-huh. It's breaking the law. Breaking the law.
All right, Donnie, we're going to put that new one in there? Yeah, I got to put it back together.
We're ready. There's a part laying there. That was extra? Yeah. Okay. Okay. You're going to
need a screwdriver, a little one. We bought these for eyeglasses. They fit in there perfect. Loosen
these things up. Okay. All right. And you're going to need a regular Phillips screwdriver.
Okay, let's go do it. I'm going to get the name brand of the door for you people.
They're all different. So this is a specific type for that specific type of door.
If we can get it open. Right there. It's somewhere. No, that ain't it. That's the
patent number. There it is. It is a Amar Light from Atlanta, Georgia. You know what that means?
If you ain't nowhere near here, you probably won't ever see one of these.
Well, maybe they'll like it just because they've never seen one.
Most of them that we get are Conair. A little more common. Donnie's taking something apart
already. Now, didn't you do a whole other video already of breaking this? I mean,
figuring out this thing was broke? No, it was basically on that other door. I didn't really
go into detail nothing about this one. So you went and again, you didn't go to school for this?
Yep. But if you're going to make money, you better figure out how to do all this stuff yourself.
So the way Donnie usually figures this stuff out is he just breaks it and then fixes it.
I'll put these screws over here. Remind me these screws are right here. There's a table
over here, Donnie. All right. Okay, here's the two set screws. So there's our ridge.
See two set screws in it? Boy, it's going to be embarrassing if this ain't the right part. If it
isn't, I think what I'll do is I'll just delete this video. Oh yeah, I see the little set screws.
So you take those loose and then you can screw the cylinder out. Do they call it a cylinder or
a mortise? What do they call it? I think the part we're putting in is the mortise.
There's your two cylinders.
Get our screwdriver ready again. And people think, well, you break them a couple of times,
that's pretty stupid. Well, hell, I can break it probably 10 times and still not have the,
and fix them all and still not have the same charge for somebody coming out.
The main problem is folks, we're down here on a Sunday in a little tiny town and there's nobody
around to work on anything right now. So we'll work on it ourselves, save some money. Yeah.
Oh, wow. Wait, that didn't catch the, let me back up. Boy, that one works good.
What's up with the old one? That's the piece that I'm talking about.
So it's broken. Oh, that was the old one that's doing that? Yeah, that's the old one. Oh,
that wasn't good. I thought that was good. No, that's the old one. Wait, they can't see the
piece, Danny. See it in there? The lighting's all bad. We're backlit. Let's go this way.
Okay. That piece there, that's supposed to be flat. Oh, okay. It popped up. I see what you're
saying. So if it's down like that, it can't move. All righty. But when it comes up,
now it ain't going to move for it. I pushed it down. When it comes up, it'll move. Okay.
Show us the new one. What's different about the new one? There's the new one.
You push down back there. Ain't got nothing long enough to push down on it.
We'll have to put it in the door and show them that one. Push down on it back here and it'll go
forward. And see, watch right here. That thing's going to pop up in just a second.
Well, it's stuck now. We done broke this one. Let me go grab the other one. No, no, we ain't
broke it. See, there it's back. All right. See, it's spring loaded in there. You push it down
and that's when you can move it. You got to get it off that lock and move it forward then.
Okay. Let's put it in the door and we'll see if we can get it to work.
I think we probably can. Oh hell, wrong piece. We're on to delete it. Delete it.
Is it the wrong piece? Nah. Make a good video. What I could do is, or what we may have done
and they didn't notice, is that we're putting the old one back in. They may not notice.
Guess what? What? We about screwed up. About screwed up. You said we. Who's this we?
Okay. Make sure you put this piece on the back. I had it all showing y'all.
Keeps the dirt and dust and all that stuff out of there. Okay. Now you got a little adjustment
there on it. You remember where it was adjusted at? No. Why not? I haven't touched this door yet.
But you said you wanted to do it. You think you're going to have to? No. I'm just here to
hold the camera and provide colorful commentary. Okay, now we're going to put our locks back in
there. Basically keep it real. I'm keeping it real. There's dirt all down there because I
haven't opened the door in 20 years. Yeah, this thing wouldn't open when I come to it. Yeah,
but look at all that dirt. Yeah, I know. It wouldn't open. Okay, the only thing to worry
about here is cross threading it. Don't cross thread it, Donnie. And it's real fine threads.
You might have it all centered. So it's very easy. You know what? You might have to loosen the
mortise, the screws to get it on the mortise so that it can center how it wants and then tighten
it back up. There goes some people. Bad people. Maybe one of these people's a locksmith.
There we go. Might need a locksmith. Now another thing, sometimes the cylinders are too long,
yes. Do we have that problem here? It looks like we may. No. I'm all centered there.
I'm hitting them back. You got the long one on and you need a short one. You were saying
you needed the long one. You're going to make me have to edit this video. All right.
It'll line up here. Oh, he was lining up his, uh, unlock where the, uh, set screw goes.
Look. Out, in. Out, in. Out, in. Let me check. Let me see if it works for a normal person.
That seems to have locked it. That seems to have unlocked it. Locked. Unlocked. I think you fixed
that one, Donnie. And see, these recessed down in this door just ever so slightly. So you got to
get that, that area cleaned out. It's aluminum now, Donnie. Don't, don't scratch it all up.
You know, these are vintage. Yeah, but there's a lot of dirt that we've got to get out.
Okay, here we go. Stick this one in. This place was a grocery store at one point,
EBT. Snap. Oh, snap. All right, Donnie's trying to get the new one in.
Just don't get in no hurry. Just ease along here. I want to see if they touch in the middle.
If they touch, you got to loosen them up. They are touching. They might work like that.
Might need a different color, Donnie.
You're turning, but you ain't in. Oh, you're still not, you're not. I'm not in the lock,
but I can't get down there because this one's out. This one's too far in.
Okay. Nope. Might go back around. That's gonna look like shit. I think our spacer is the wrong
size there. We're gonna have to find a different spacer. I think our, our cylinders are too deep.
Let's see if I can get the outside working. Come on. The slit is too small for my eyes to focus
on. I think the, uh, I think the, uh, all of these modern cylinders are an inch deep,
and some of these doors, I think back in the day, must have used a slightly thinner one,
which is why you end up having to put these collars on it. See, that's too far out. It just,
it missed the hole. It missed it. All right, he's gonna keep messing with it. I'll come back
and show you what we end up with. Okay, so we're sitting here playing around with this lock,
and there's three sizes of these things. This is the one that we actually need.
Okay. This is the one that was in the door. Let's see if I can get it to focus here.
Okay, you see how this side is wore out and beat so many times against the door, though?
See that? The edges just wore off, so now it's too small to open and close the door.
We need a new one. So, you know how I told you all of our stuff's over there in the other
building? We was over there looking. I walked over there, and of course, we got locks. We got
everything. Right there's a brand new one. So, that's how it, if I can get it lined up here,
that's how much it's wore off over time. Maybe a sixteenth, a little bit, about a sixteenth.
And then this one is the one that seems like they want to send with all of them,
and it's shorter still yet. So, we have one. We're gonna put it on here. I put this one on
here trying to figure out exactly what was going on, and I figured that the inside never,
nobody ever comes in and locks it from the inside. Probably one out of every hundred locks
comes from the inside. So, we're replacing this one with this one, which is about a
sixteenth of an inch longer, like I just showed you. And we're gonna put it on here, and then
we're gonna put it back in the door. Okay, here we go. That one unlocked. That one unlocked. That
one unlocked or unlocked. This one unlocked or unlocked. Can you lock it? Take the key out?
Lock it. Nope. Damn. Might be too long. Hmm. Hmm. We're getting there, folks. We're gonna figure
it out. What do you think about we twist the thing to get the hammer? Damn it. Where's Joey
at when you need him with a hammer? Don't try this at home. That's dangerous as hell. Don't do that.
On a serious note, don't do that unless you know what you're doing. Hey, are we still saving money
from calling a locksmith? Absolutely. Hanging a little too much for you. Good to go. It's just
a little bit. It'll probably wear what I'm sitting here thinking. How's that? I'll try it in the door
It's a pain in the ass with all my keys in my room. The lock is so close to the frame itself.
Oh, all your keys are hitting. All my keys are hitting like crazy.
Show everybody your keys, Donny. Thank God I'm with you. That's all I got for this one. I normally
have my big green. That ain't that bad. I thought he was complaining he was hitting 100 keys against
it. Then I come find out he's complaining that he's hitting five keys against it.
So make sure you set screws are tight. Okay? Set screws are tight and then you push the door.
Stop back at your door. Prim back on. Back on. And you sweep your dirt out of the frame.
And then you're done. All right, we'll show you what that looks like here in a second.
I can see what he's saying now. Let me show you. That mortise is right on the damn frame.
So when you put the key in, look at this, there's like barely enough room
to get your hand on it. But it turns just fine. Yeah, we're good, Donny. You're right. It's too
close to the frame. There's something going on. It's just they mounted it. I don't know. It must
be this type of door. They do that. Or normally there was a different type of frame when you use
this door or something. This is one of the locks across the street. You can see that the way the
door is made, there's a little, I don't know what you would call it, doorstop there, I guess.
So whenever you turn the key, you got a little bit more room and it just seems more natural. So I
don't know. A little thing like that you wouldn't think would matter, but apparently it does.
Hey, show them how we swept the sweep, the stoop there, Donny. Look at that.
Cleaned it all up and everything. Boy, we're top-notch. Top-notch right here. We got the old
style. It's dragging a little bit on the thing down there. I can take a side grinder and hit it.
No, I don't think that. I think we're looking pretty good. Might adjust the closer a little bit.
I think we're looking pretty good, Donny. What do you think? Well, Donny,
this door, nobody's used this door in, we've been down here, what, 15 years?
Nobody's ever come in and out this door. They always use the other door. Donny's always the
one that's making the firsts happen. Yep, I make it first. All right. You think the door's done,
Donny? It's done. It's done now until somebody complains about it. Tell them what to do,
Donny. All right. Subscribe to the channel if you like us now. You'll see all kinds of weird
shit going on here. Subscribe to the channel, give us a thumbs up and leave your comments down
below. All right, folks. We'll see you on the next one.
