Painting a Cast Iron Intake for my 400 Small Block 1986 GMC Sierra

My Brother Donnie
258 followers
Jan 13, 2025
okay folks
it is saturday donnie wants to put this
intake on sunday i went and picked it up
at a guy's house
it's hot too so before we put this in i
had to clean it up a little bit and
spray paint it
so i've been cleaning grease off of it
and then i seem to remember
in the back of my mind that at some
point i bought a gasket
scraper
i have found my gasket scraper
that's right i have the right tool for
the job
this is to scrape gaskets so let's say
there was a gasket on here
notice how that escape scrapes the
gasket right off
[Music]
what do you think about that
this may be our best video ever stay
tuned
give us a thumbs up for taking the
trouble to film
i've been trying to remind people of
that right here at the beginning of the
video
i hope i'm not gouging the
gasket surface i don't believe i am
all right
[Music]
this gentleman had this on facebook
donnie seems hell bent on replacing that
aluminum one so we're gonna do it
this is an original one non-egr
i believe this would be similar to what
would have been originally
if it's a 70s model 400
so
that's the distributor i don't think
there was a gasket there this carburetor
there would have been a gasket there but
they don't get stuck because you know an
rtvm
this was the uh thermostat housing
so there would have been a gasket there
so i need to make sure to get it pretty
clean
and then i have to do the bottom where
it mates to the heads
but uh
this stuff's cool an old school freaking
look there's the firing order donnie was
telling me
we need to google that to make sure we
get it right but there it is it's right
on the manifold
and it says gm on it i believe this
might be an original one i need to run
that number and see what it went through
but
regardless of what it went to we're
going to use it it's going on a 400.
let me flip it over and do the back a
little bit
all right folks i cleaned it up about as
good as i could i'm going to go get a
piece of cardboard
and some spray paint i hope mine sounds
better than that whenever i'm done
donnie's saying not to paint that
that in that so uh
i think i'm going to minimally paint it
and then hit it with this gasket scraper
to take the extra paint off what do you
think will that work
i think it might
i'd like to know what the three four
zero
three four
eight two five zero
three four eight two five zero
i think that's what that says
three four eight two five zero gotta
google that all right i looked it up
it's a three four six two five zero
apparently
and it came off of 76 to 82
would have been a 305 or 350 four-barrel
iron quadrajet i mean it doesn't really
tell me anything different
but we're putting it on a 400 i think
that'll be all right
76 to 82 though
some people online were saying they
thought it might have been a little
older because it uh
since it's got that old-school choke on
it
but who knows
okay folks going with orange
taking it back out used to be the guy at
the parts place said
you're gonna paint it orange as if
you would paint a chevy engine anything
but orange
i showed him the can i said buddy look
at the can
so uh
paint it up a little bit i don't know if
it's the same color orange it's on it
but surely to god
if you buy chevy orange it's the same
all over the world
isn't it shouldn't it be
okay so i'm gonna throw a little paint
on it and i'll see what it looks like i
didn't take the coil
the uh choke thing off i'm gonna paint
it too i think
we might end up just leaving it on there
but we're putting an edelbrock
carburetor on it so it's got a
an electric chip
[Music]
i decided it looks better without it i
guess i'll take it off
it's a first coat and we'll let her dry
i got a little bit more on the water
thermostat housing boss than i wanted to
but
it'll be okay we're gonna clean it up
that's one coat i'll come back we'll do
another
all right folks spun it around a little
bit i think that'll about do us there
i'm a two coat kind of guy
doesn't have to be perfect we're gonna
put a new
uh thermostat housing on it put the
carburetor on it
put the thing and put the new bolts in
it i even ordered new bolts
i think it's gonna look great what do
you think
so uh i'll show you a video of it
tomorrow whenever we let's paint around
a little bit and i clean off the
clean off the over spray from the the
areas donnie told me not to get it on
don't tell him
i know this is on his channel but don't
tell him that i got it on there
i'm gonna clean it off for you season
all right folks so i cleaned it up a
little bit with a razor blade
so here's what i'm going to do you are
going to have to help me out
i'm going to tell donny that that's
factory paint
i'm going to say yeah i tried to clean
it up but you know that factory paint's
hard to get off
because he hasn't seen it yet so i'll
tell him that this is factory and then i
just touched up this and that i taped it
off you'll never know
how would he know he has no way of
knowing there's no
video evidence of it or anything he's
probably not even seen this video so
a lot of times like if i do a car video
he doesn't watch it i put it up he
doesn't watch the whole thing
okay so what i need y'all to do
is down in the comments put
hey ron i think that i think that uh
paint on the
on the uh carburetor studs i think
that's a the carburetor boss
i think that's just factory you can't
get that off
so we'll see how that goes stay tuned to
the next video to see what he thinks he
specifically told me not to paint that
so there's our casting number
gm baby hey there's a 500 i wonder if
that means like the fifth revision
never could tell what any of these mean
who knows
who knows it's probably not even
important is it
firing order it's about to rain so yeah
that's my next thing okay
so
i can get it to focus there we go look
at this
is there anything more foreboding than
dark stormy skies over a church
so it's about to rain
so do i drive home with this in the back
of my trunk and let it get wet i mean it
should be all right
right it's got grease still on the
bottom
a little bit not a lot of it and i don't
have anything here to clean it off with
i don't want to put it inside the truck
so why not just let it get wet it's
gonna have water running through it
anyway
what do you think maybe i'll find
something to cover it up but put it in a
box or something
all right so that's enough on this so we
got it all painted now we just gotta pop
it on the engine so i'm gonna drive it
down there to him tomorrow
and see if he feels like putting it on i
also ordered some
some um a bunch of stuff for it so i've
got like a new
uh heater hose nipple and all that kind
of stuff
but we'll see what we can get done on
the tomorrow so i hope you enjoyed the
video how do you think it turned out
do you think this paint's gonna be a
problem
i think it'll be fun leave your comments
below give us a thumbs up we're taking
the trouble to film it for you
and uh you know this is just part of a
series so we didn't get much done
we just made it real orange so
let us know what you think and what you
usually do and we will see you on the
next video we appreciate everybody
watching
