Turning a Vintage Diamond Ring Into a Modern Beauty

JEWELRY FOR BEAUTIFUL WOMEN
157 followers
Today we're giving new life to an old white gold diamond cluster ring by transforming it into a
unique freeform style ring. I love bringing new life to old pieces and today's project is a
perfect example. I'm Zach Amy, join me as I share the process of crafting meaningful pieces of
jewelry each with its own unique story. A woman and her daughter came to me with this ring and
they had the idea of resetting the diamonds into a more modern fashion that would also be more
comfortable to wear. I'm guessing that this ring is probably from the 1950s. It has a dated look
and it sits very high up on the finger causing it to catch on things easily. The owner and I went
over a variety of options and she decided she wanted to go with a freeform style ring because
of their flexible designs. When selecting the style she also brought in her daughter for her
input because one day she plans on passing this ring down to her so she wanted to make sure that
we were going with a design that she also liked. It's always so special to work on a piece that
carries such personal history and is destined to become a cherished heirloom. First I need to
remove all the diamonds. To remove the diamonds I'll use these special prong pulling pliers that
are designed to pull back prongs without damaging the gemstones. I then use this piece of beeswax
to pick up the diamonds after their prongs have been pulled back. Now that all the diamonds have
been removed from the original ring let's move on to the stone setting process on the new ring.
Fitting all these diamonds into the new design without losing the freeform ring's elegant flow
is going to be a delicate balancing act. To secure the diamonds into the new ring I'll need to
install these white gold crowns. Essentially these are the prongs that will hold in the stones.
I plan on soldering these crowns into the new ring but it's important that I first prepare the ring
so that I can get these crowns nice and low. One of the main reasons this customer wanted to do
this project was to get her diamonds set lower than in the original ring so it'd be kind of
counterproductive to set them high in this new ring. I always recommend setting stones as low
as possible it just makes the ring much more wearable. To create a layout for the crowns to go
into this new ring I'll go around with a small ball burr that's the same diameter as the crown
and I'll carve out sections where I plan on placing them into the ring. I do my best to squeeze in as
many settings together that I can without taking away from the ring's design. This client wanted
me to squeeze as many stones into the ring as I could while still maintaining the design
and then return the stones that I don't use. When I'm satisfied with the layout and how the crowns
are seated in the spaces that I created for them I'll solder them into place one by one. This is
somewhat of a time-consuming process because there's so many crowns to install and I need to
be very diligent with each one to ensure that I get a proper flow of solder and I'm also careful
not to overheat the crowns because the tiny prongs are very easy to melt. I could install these with
my laser welder but I decided to go with solder for this part of the project because it will end
up requiring less cleanup when it comes time to polish the ring. When I'm done soldering I'll put
the ring on this ring mandrel to cool it off. Once all the crowns have been soldered into place I'll
go around the ring with a setting burr and cut a seat into each crown. This will give the diamonds
a place to rest and remain secure in the ring. It's important that I cut each seat to the proper
depth and that they're all level. Once I achieve this I'll give them all a detailed polish. This is
an important step in the stone setting process because if I don't polish this metal now the
diamonds will prevent this metal from being able to be polished anytime in the future. This also
ensures the metal under the stones is nice and shiny. I then use some beeswax to carefully place
the diamonds into the crowns and they'll go onto the seat that I just cut. I could then tighten
each prong incrementally until the stones are nice and tight. Once the prongs have been tightened I'll
be able to go around and trim the length of the prongs and then I'll shape them with a variety
of files and abrasive rubber wheels. It's important that I shape and polish the prongs in a way that
they won't catch on clothing when the owner wears the ring. Now that the stone setting process is
completed I'll go around and give it a quick detailed polish around all the settings.
Now the ring will take a bath in the ultrasonic cleaner for about 15 minutes.
This will remove any polishing compound and gold dust from the ring.
Because this ring is made out of white gold it's going to need to go through an electroplating
process called rhodium plating. If we don't do this process this ring will have an off-white color.
This is because part of the alloy that this ring is made out of is yellow gold. Here you can see
the before and after of this project. This new look is much more modern and is designed for
comfortable daily wear. The remaining diamonds will return to the customer and she plans on
using them for another project in the future. She was very pleased with the final product and looks
forward to wearing it for many years and then one day passing it on to her daughter. I'd love to
hear what your thoughts are on this transformation. Drop a comment down below. Thank you so much for
watching and if you enjoyed this video please hit like and consider subscribing to my channel for
more similar content. And for more insights into my craft follow me on instagram at Zachamyjewelry.
We'll see in the next video.
