Leather Armour vs. Arrows – Can It Stop Them?

HISTORIC Weapons
3 followers
26 Video Views·Jan 13, 2025
Cuir Bouilli or boiled leather was leather treated in a special and mysterious way that was used for armour from the classical world onward and also for highly decorated scabbards and leather cases.
In this video, I explain how I believe it was made and what it was, but also how it worked; but more importantly than any of that, I made samples and we shoot it with the lockdown longbow!
So it's chipped it, sure it's chipped it, but that's a fence post and this is leather.
Hi it's Tod of Tod's Workshop and Tod Cutler here and today we're back with the lockdown longbow
and boiled leather. Leatherama, queer boulet. Sorry French people, I just killed that word,
I know. I'll say at the beginning, a lot of this is my supposition and my guesswork, so if you know
that I'm wrong or if you think I'm wrong, just remember even if I sound like I'm adamant,
I'm not certain, but I think I'm right. It's stiff, there we go, I'll give you a good close-up.
It's shiny because of the process, I'll explain that and same with the discoloration. It's
definitely hard and that is four millimeters, four mil thick. So what is going on? Well there's a lot
to unpack here and there's a little bit of sort of material science, so we're all going to head
back to school, but you know I'll make it good, I'll make it the way school should have been.
So I've got myself a piece of veg tan leather here, the same thickness as this, to give you
some sort of an example. It's flexible, you can do all of that, it's fine. Does it make good armor?
Well let's just have a look. I've got my piece of veg tan leather here and I've got a block of foam
and a Tod Cutler rondel dagger, it's the pointiest one that I sell. Now if you do want to support
this channel, buying the Tod Cutler range of products, it's a good way to start because that
really helps me and it helps fund all this stuff I'm doing. So rondel dagger, it's meant to be an
armor penetrator. We've got four mil of veg tan leather here, let's just see what it does.
Oh there you go, I think that fairly convincingly goes through. Well perhaps no great surprise,
but let's explain what's going on. Now hardened leather, there's lots of speculation about how
it was done, whether it was treated with wax, whether it was with oils, whether it was with
water and so on, but the problem is the name is boiled leather, cuir boulet, so the assumption
has to be that it is boiled leather, but this is the problem, it can't be boiled leather. It
can be all sorts of things, but it cannot be boiled leather even though that's what it's called.
So this is leather that I have boiled and look at it, this started as flat sheets, it's hard as you
like, hard as you like, but there you go, I can just crack it, there we go and I've broken it. It's really
hard but it's deformed, you can't make sheets of armor out of this stuff. So it's not boiled leather
right? That we have now discovered. So what is it? Well you can see the manuscript pictures and
there's like sort of big vats, steaming vats, so I think the assumption is that it's something to do
with heat, well yeah. So I got to thinking one day, I landed a tv job where somebody said can you do
boiled leather and I just went yeah of course I could do boiled leather, yeah yeah no problem at all. So of
course I put the phone down, it's like oh no, boiled leather, right what is it? And I got to thinking
and I went back to a conversation I had with Peter Jonson, the great swordsmith and designer
and he was talking about sword grips pressing the glue through the leather and it becoming
impregnated and becoming almost like fiberglass and I thought that conversation and I just went
that's it, that is it. So what's fiberglass? Well there is a point to this. Fiberglass is glass
fibers right, there you go, glass fibers. In a mat it's flexible, you can do that, it doesn't crack,
it's very thin that's why. You mix it with resin, polyester or epoxy resin which is brittle,
so that's rubbish on its own, the glass is rubbish on its own. You put the two together and the resin
fills the gaps between the glass and you end up with something incredibly strong because these
fibers are really strong in tension. So I thought well it's like fiberglass but obviously it's not.
So you have the leather which is fibrous, you can see that when you rip it apart, it's full of fibers
so the idea is you fill the gaps between the fibers with basically a resin. That resin, if it
is brittle, it is hard and incompressible and combined with the fibers you end up with something
tough. There are really important characteristics about boiled leather, the way it can be decorated,
the way it can be molded and shaped for vambraces and breastplates and little tiny pen
cases and all sorts of things that used boiled leather, that means that it has to have a very
specific set of properties. One of those is that you must be able to mold it but then there's too
much decoration on to do it while it's there, it'd take days to do that level of decoration,
so you must be able to sort of bring it back. It's not like heating the surface and hardening it,
you must be able to soften it again to decorate it and then let it re-harden.
And I thought of all these different things about the way it had to work and I thought
it's animal glue. So then what you do is when it's warm, you put it over your mold and as it cools,
the jelly hardens, it is jelly, jello, it hardens, the leather takes its set and then
it dries over the next weeks and you end up with something that is like wood. And that is our
material science story, but the thing is all of this is going to come true again when we talk
about the gambeson, because a lot of this happens the same way. So I'll just show you,
I have got a regular bit of gambeson here, nice and flexible, 32 layers of linen and then I have
a much stiffer wine and salt impregnated gambeson. We're going to come to that in another film,
but the process is the same. You are filling up those gaps, those interstices between the fibers
with something, in this case wine and salt, in the other case animal glue. I can't say for a fact,
not a fact, that I'm right, but in my head I'm certain that I am. But it means also,
because I can't say it for a fact, we don't have a recipe about it, we don't know how this stuff
was really made, so there is experimentation to be done and I've made a batch of stuff here
where I think maybe the jelly was too strong and so what has happened is we've ended up with
something that has removed a lot of the toughness but left brittleness, like a knife that is over
hard. But I'm going to give you an example here, look at this, that is a piece of leather okay,
leather and jelly. This is a fence post, check this out, that is not something that you see
every day. Leather chops fence post, so it's chipped it, sure it's chipped it, but that's a
fence post and this is leather. So that is the end of our material science lecture, so what are
we actually going to go and shoot? Well we've got one layer, two layer and three layer pieces of
leather and you can hear they are hard. Let's shoot them. Back at the range with the lockdown
longbow and a single layer of hardened leather, let's see what it does. Type seven needle bodkin.
Right well that is straight through, straight through, so I don't think there's any point
in doing any of the other arrows on that one, so we'll go up thickness and we'll see how we go.
It's actually, it's cracked right across, so maybe I cooked up my mix a bit wrong, you know,
like I say no recipe, but you know it's stopped it. Hell, actually you know what, let's just try
a type nine just because. Goodness, okay well that also straight through, cracked it, whole
chunk fell off, so clearly single layer hardened leather, at least with that recipe, no good at
all. We're now going to go for two layers of hardened leather, so this is about eight to
nine millimeters of leather and of course jelly, or if you're in the states jello,
the magic ingredient. Type seven needle bodkin.
Straight in, but the penetration not so good and that is a needle bodkin. Let's just try it
with a type nine. Again, oh killed it. Right well I better go and create that one then.
Now then, getting interesting. So here, needle bodkin type seven, it's cracked the surface,
I mean it's absolutely shattered it, so that says to me that my inner expertise in making
hardened leather has just made this a bit too brittle and not quite tough enough. You know
what? Experience would change that. This one, type nine, has not cracked it, but again if we now look
the back side of these, they're coming through, the foam does stop it, does slow it, but it's not
massive, it's not a massive game changer to it. What is interesting is that two layers is making
a difference, that is beginning to make a significant difference to how these things
penetrate. So we're going to try with three layers, let's see what happens. Right here we go again,
I'm going to start this time with the type 16 to see if that makes a significant difference
to how it goes through and then we're going to swap into the others. Anyway, I don't know why
I wanted to mix it up. Oh that one's straight in, but it doesn't look like the leather's cracked.
Type nine, let's see if it can do its business. If type 16 does, I'm guessing this will, let's find out.
Well that's stuck in. Tauten or Tudor bodkin. Last up, type nine. We're there, four clean shots, let's
go have a look. This promises to be interesting. I love these tests, I just love them. Now clearly
all four have penetrated. Question mark is how deeply? So I'm just going to mark them off and
then we'll pull the target off and we'll have a look what's what's going on. Here you go, this is
an unpacking video for you and there we are. Let's give you a sense of scale. There is my hand, so
that's not nice. The other ones again, you know, not very pleasant. Type 16 actually, that's
interesting, it fared less well than all of the others which I wouldn't have expected.
That is intriguing, that is intriguing, but all of them have really been caught and bound by
this leather and this is, you know, three layers. There's nothing to stop you doing four or five
layers. So I'm back at base and we'll have a look at what's happened today. Again I just love this
series of tests because these are things I haven't done either and I've wondered about. So yeah,
hardened leather, did it work? Well yeah it did, so let's just have a look. So clearly,
one sheet of hardened leather to my recipe, whether that's right or wrong, it went straight
through and actually fractured the leather, so not very good. Two pieces of hardened leather,
so that is about eight millimeters thick and needle bodkin is penetrating from back of the
leather to end of the point 23 centimeters. Type 9, back of the leather to the end of the point
15 centimeters. But then let's go and have a look at the three layers. Three layers, needle bodkin,
this time 11 centimeters, short bodkin eight centimeters and this one I ran the touton
Tudor head six and a half centimeters and the type 16, five centimeters. Now that's interesting.
Now this armor type is not particularly heavy, but throughout history armor, men seem to wear
roughly the same weight of armor, they're prepared to wear roughly the same weight of armor
and so I couldn't tell you exactly how heavy a breastplate made of this should be, but actually
if you did it all at three layers of leather and then maybe on the front you upped it to four or
five, I can see that being completely viable as a piece of armor. Can they make it? Yes, I've
showed you how you can make it, how you can do exactly this. You can mold it, you can shape it,
you can decorate it, you can do all the stuff that you want with it and it is pretty darn resistant
to arrows. Four layers, would this have gone through? Maybe marginally. Five? I think it
probably wouldn't. There's one more thing we're going to do, we're going to go back to my stab
test with the rondel. So these are going to take some getting out, so we're going to break and I'll
be back in a minute. I've removed the arrows from the two-ply piece and we're going to go for the
stab test again with the Tod's Cutler rondel. Remembering these are all available and they
really do help support the channel buying these things. So that's penetrated about a centimeter,
good defense. So you know anybody who says hardened leather is not good,
they're wrong. We'll try that again with a three-ply, just see what we do.
And that one, maybe about six millimeters through, so again that one without a doubt is not a
killing blow, well nor is the other one, neither of them are. They're gonna hurt a bit. So what
have we learned about boiled leather, cuir-bullet and arrows? Well one thing we learned is I can't
pronounce it. I've given you a recipe and a methodology that I am almost certain is how they
did it. If it is done that way, it works. It works pretty well as a three-ply, but arrows can still
poke through, we saw that. As a four-ply, I doubt it. Five-ply, almost certainly not. Actually you
know what, let's go back to the range. I'm going to set this up with the five layers and we're
going to see what happens because you know what, they would have protected the front of their
breastplate because a normal steel breastplate or iron breastplate was thicker at the front
for exactly the reason that's where the shots tend to come from. So scratch this,
there's going to be a conclusion to the conclusion. Let's go shoot stuff. I just had to shoot this,
I need to know. So we've got five layers of hardened leather according to my recipe,
type seven needle bodkin, well it's through. Type nine plate cutter, short bodkin, call it what you
will, and that's through as well. Let's do two more just because. So we've got another type nine,
that's annoying, type seven. Let's go have a look. I'm slightly annoyed, I was sort of hoping
that they were going to bounce off, but they didn't. But anyway, how far did they go in?
I'm not annoyed anymore. I'd love to show you, but I'm not. Let's take it back to base and we'll
have a look there. And here we are for the great reveal. Five layers of hardened leather,
the type nines went through 30 millimetres and 28 millimetres, type seven needle bodkin,
78 millimetres and 65 millimetres. And there we have it. Type nine needle bodkins, well slender
point, but you know you're not going to be happy if you get that in the chest. These ones, clearly
you're not going to be happy, but you'd almost certainly live from those. You might even have
other padded garments underneath, who knows. Again, what's interesting here is that these
are bent. Well don't forget most arrowheads, we have no evidence that they were made of steel,
so they would have been wrought and wrought is softer than this really, these are mild steel
that I'm using in this case. So bending arrowheads like that, there's nothing wrong with that,
that's just a realistic result to hitting something that is really quite hard indeed.
And there we go, boiled leather. Can't tell you they made it like this, but I'm pretty sure they
did. If they did make it like this, would it work? Yes it would. So what I'm going to do now actually,
is I'm just going to remove the arrowheads and I'm going to weigh this sample. I've got a breastplate,
I'll calculate the areas and I will tell you how heavy I think a breastplate would be were it to
be made of this material on the front surface and thinner on the sides. 500 grams for that piece,
so bearing in mind it's there, I think that you could probably do a three-ply breastplate with a
five-ply reinforcement on the front for around about two and a half, possibly three kilos, so
round about six to seven pounds, something like that. Boiled leather, right good protection.
See you next time for another lockdown longbow. Dunno, maybe gambesons, maybe mail, who knows?
