I BOUGHT A WRECKED PORSCHE 911 GT3RS THAT WENT SWIMMING

Ex Used Car
15 followers
I just bought my all-time dream car, the 2024 GT3 RS, but there's one problem,
or two, possibly three, possibly a lot of problems. The 992 GT3 RS is the daddy of all Porsches.
What have they done here? More aero than the GT3, more power than the GT3,
and more carbon than the GT3. But if you want to buy one of these, you've got to be on a special
list from Porsche. I've bought like a ridiculous amount of cars to even be put on the list.
So when these people who are on the list, who could buy the GT3 RS, come to sell them as a
used car, they could sell them for way higher than the list price. That's a lot of money for
just two letters. But let's say the previous owner bought one brand new and on the way home had a
small accident in it, that might be an opportunity to get one way under this price.
The GT3 RS is next. Here we go. Here we go. You're winning. I'm winning. No, no way, no, no.
It's cheap, it's cheap, it's cheap. Come on. It's cheap. That's just a minute. Yes!
I just bought myself a 992 GT3 RS, which had been not only crashed, but fully submerged
underwater. Problem was, this car was crashed in Washington in the US and we're in the UK. So I
had the car sent to Florida to my good friend Tavarish's and then we fly over and plan to
rebuild it there. We're back in Florida. Let's go see this car. So apparently Matt's car just got
here. Oh no. Oh no. So from this side, it doesn't look too bad. And then you go over to this side
and it's bad. The best thing about this is that we've only seen the car in videos and photos.
So this is literally going to be the first time that we've ever seen it. I didn't see this part.
Just got Hulk smashed. That is nuts. Are you looking forward to seeing the car?
Yeah, seeing it's not going to be a problem, is it?
That is completely unfixable. Wow. That, oh my goodness.
I mean, this is, this is, this is parts at best. So even Freddy, who's rebuilt many
crashed damaged cars, is starting to doubt that this Porsche can even be rebuilt.
But nevertheless, they got it off the trailer and pushed it inside, ready for me to collect.
Here we go. Here it is. This is what I've spent a hell of a lot of money on and we're hoping
we can rebuild it. Are you ready? Ready. You've seen pictures, haven't you? I haven't. You've
not seen any photos of this? I've seen it in the water. This is bad. But that's all I've seen.
Look at the size of the wing. Oh look, there's your Porsche that you rebuilt in this unit.
Yeah. And now we got this. I'm dreading this. I'm dreading it. I don't know,
I don't know which side I want to see first. Okay. Not bad.
Oh my God. Oh my God. Oh my God.
Look at that. Is that side bad?
Wow. So here it is. The GT3 RS. And it's kind of eerie to think this thing was fully submerged
underwater. Nevermind how damaged it is. Oh my, do you think the engine survived?
From here, I can't see anything that hasn't broken. Where do we even start? There's not
a good panel on it. Oh my God. Look at the front. Oh, this is wild. How's the bonnet gone?
That's all broke. How is it ended up like that? And look at the stroke brace.
So that's fully been pushed in. What do you think? This is beaters.
Is this wet? It seems quite dry. How long ago was it since it's been in the water?
It's got to have been like March time. You know what, there's no corrosion on there.
Unlike the air straps. Yeah, you wouldn't know it's been underwater. Even all this, look.
You wouldn't know it's been underwater, would you? I guess the positive we can take from it
is that this car went under fresh water. And unlike salt water, it doesn't just start to
touch it. It went straight into a river. How long for? We have no idea. And how? We have no idea.
At what point does it stop being a car and it's parts? These wings, I had a look before we come
here. 15,000 pound a wing. Just for that? Just for the wing. Does it include this?
This way actually looks good, doesn't it? Yeah, let's not damage it.
Most of the panels on this car are made out of carbon fibre, which makes them lighter,
but also a hell of a lot more expensive. Look, the passenger is lucky to be alive. Look at this.
Look how much. Do you think there was a passenger? It's still got all the stickers from new on the
plates, on the foot pedals. That's because this car was pretty much brand new when it crashed
into the river. You can see from the temporary tag on the back. Rumour has it, it was driving
back from the dealership. The way you start, save the good bits. Shouldn't take too long.
But nevertheless, this is what I've bought. Probably one of the worst cars I ever have.
And now we've got to work out whether it can actually even be repaired.
I think this is a good place to start. We want to know whether this engine's any good,
but we can't find that out because we don't have a key. This car's got completely soaked,
so it's likely that there's water in everything. So it wouldn't be a good idea to try and start it
anyway. But Copot said that it didn't have a key. It doesn't come with a key, which I mean,
it could be true. It could be false, but there is like, this could be some likeliness that the key
is somewhere in that mess in there. So I think the first step is to try and have a search party,
look for a key. But before we even get onto that, I want to preserve this wing,
because if we open this bonnet up, it damages this wing. And this seems like the only good
thing on the car. And this door as well. This door seems pretty good. It's full carbon fiber.
So let's get this bonnet off before it causes any more damage. I don't want to throw this away
because there might be a small chance that it actually could be repaired. The bonnet on a GT3
was £12,000. So on an RS, I dread to even think what it costs. Look at that.
This is going to go on your wall. Yeah, this is really light though.
What would happen if we put a jumbo pack on that battery?
I have no idea. I mean, we could try it. That's what, cause that like electrical fire is one,
but like it's so fire extinguisher, battery. Cause I think if the key is in here and that
battery pack does power something and the dash works, the ignition would come on because the
keys in the car. Yeah. But if it's been underwater, then, then yeah, it might just,
I mean, it might just pop the uses. Porsche does make good cars. So I don't know. Yeah.
I can't see any key. It could still be in the water, but I think the interesting thing would
be to put power to that battery and see if anything happens. Cause if it does, it's quite
positive. If it does the best thing about this is that we can't make it worse. That's exactly
what I said with my P1. So here goes nothing. But before we put power to the battery,
we wanted to just get rid of the broken glass on this door just again, to stop any more damage
happening. And this thing just lifted out. And once that's done, we can now get the jumper pack
out. See what happens. Is this going to cause a fire and short out or is something going to work?
I've never rebuilt a flood damaged car. So I have no idea where to start.
Oh, we got light. Oh my God. The lights come on. It's flashing. What's that mean? I've never
seen it flash. Why is it doing that? If it come on in here. Oh, interior lights on. Ready?
Oh, but nothing. It was completely dead. No ticking or noise on the dash.
Well, does that mean the keys not in the car? Yeah. But if the key wasn't in the car,
I'd tell you no key. It'll go. So it's the fact the ignition isn't working at all. Yeah. So there's
nothing here. There's some kind of problem here, but that could be a fuse or this could be
completely gone because it's soaking. Might be one of the main fuses, the 50 amp ones or something
like that that's blown. And that would just cut all the power to the whole car? Well, it might
be more than one that's blown. So we started to check all the fuses that we could see in the car
in attempt to try and get the instrument cluster to work. That way it would tell us whether the
key was in the car or not. And there were a few fuses broken, but it doesn't matter how many
fuses we changed. It still didn't seem to make any difference. So the main fuses for the car,
the big ones, the bad boy ones are right underneath the dashboard with a pyro fuse,
like literally all the way behind it in a box behind there. That means the whole dash has got
to come out to get to it. And then we won't know whether anything works until you put it all back
together, which is a bit silly. This is quite a difficult one, really, because we may need to
ring Porsche to try and find it, see if we can actually get a key for the car, because that
could be a problem itself. And then will they give us a key if they can't code it to the car
because the ignition doesn't come on or nothing works? As I found out from doing the GT3,
the main fuses are right behind the dashboard and you've got to remove everything to get to them.
And if some of these are blown, then we wouldn't have power to anything else in the car.
We've been fairly unsuccessful there, but as we thought, most of the electrics on this are
completely got a mind of their own at the minute. So we're kind of like a loose end really until we
get the dash out. And then when we get the dash out, we can see the main fuses and check them as
well. That would really help. But I think kind of the next step, really, we've got to move on.
And what we haven't seen is the underneath of the car, because I saw a photo of this
beached on the rock. So the whole underneath of the car could be gone. The gearbox could be gone,
the bottom of the engine could be gone. Then we're working with literally nothing,
then really, like we're not even got a good shell. At the minute, we've got one good wing,
two good doors, ish. And if the engine is battered to pieces when we see underneath,
then it's really not looking good for me. Let's get inside. Now, despite how badly damaged this
car is, we've heard that the driver actually survived the accident. The story is he actually
managed to get out the car before it went into the river. But that's all we know. Now we're
going to send the car up to see if there's any more damage underneath the car. If the engine is
gone, I don't think it's going to be worth repairing. Look at that. Wow. But so far,
so good. Nothing looks obviously damaged. Nothing serious. In fact, all of the under trays still
look intact. Some of the aero underneath it does look slightly damaged, but it's not as bad as what
I thought it was going to be. So there's some good news, I think. It's got carbon fiber drop
links. Oh yeah, boy. Our main thing here, if we're grasping at anything, is seeing if this
engine is any good. Our first step then will be removing the rear diffuser so we can expose the
bottom of the engine. And lucky for me, it actually looks okay. Next step is taking off
the under trays, which are covering over the gearbox. This is the PDK automatic gearbox,
and they're not cheap. Looking good. Let's get this brace off. So far, it's looking good under
here. A true test would be when we unplug one of these and see how much water actually comes out
of them. I'll be surprised if there's no water in it, but it can't be. That thing was fully
submerged underneath everything. It's actually looking positive under here. Until we remove
this strut brace. Oil. Now, why would oil be coming out unless it's overfilled with water
and it's pushing oil out? Oh, it's got a crack in the sump. Oh. Come down, it's split. That's
a hole there, isn't it? Is that plastic? Yeah. Oh, it has. That's a hole. Oh, Susie. That means
that it's definitely going to be full of water. So, it uses all the electrics to change gear,
and electric and water don't really mix. So, maybe that's not very good. Okay. Working our way
through this, and we've got a hole in the gearbox sump. So, best case scenario, we drain the oil
out of that. We fill it with new oil and everything works. We don't know whether that'll work or not,
and there's only one way to find out about that. Right now, we're about to find out how much water
is inside the engine. Best way of doing that is draining the sump, and oil is not supposed to mix
with water. There's only supposed to be oil in the bottom of this. Let's find out. You can see
where's the oil? Oh, my. Oh, look at that coming out of there. Oh, my God. It's like cheese.
It's like cheese. Do you know if we take the oil filter off, if it's got water in the oil filter,
would it have been running? You'd think it's just going to be water everywhere, wouldn't you?
But that was my next step, removing the oil filter from the bottom of the engine. Some are good.
And yet, it was full of water. Oh, dear. No. Now, engine is very bad. Oh, it's a bit of oil.
So, we've now established that driving a car into water puts water inside the engine. Now,
we need to... Well, it's bad, but we're really interested to see how far it's gone. And
if the engine was running when this went in, then it could mean the engine is just...
Well, it might still be repairable, but it would have caused a lot more damage than what it would
have if it wasn't running. It would be way less damage. So, I'm going to take this exhaust off
because it just seems well accessible compared to getting a spark plug out. All the exhaust here,
and that's going to access me into the cylinder. We should be able to see any valves, if there's
any water in the engine there, because we imagine there's probably going to be a lot of water all
sitting in this exhaust as well. So, that's my next objective. Now, having this much water inside
the engine isn't a problem as long as we can drain it all out before we attempt to start it back up.
The problem is, is if the water is in it when it was running. If so, some of the water could
have got sucked into the cylinder. And when the piston goes up on the compression stroke,
it's not going to be able to compress the water, which would then cause a lot of damage,
maybe even bending a conrod.
Can you see the exhaust valves up here a lot? They don't look completely rusty, which is good.
Like that side is open. They don't look completely rusty. Like, not rusty is good. That's what we're
looking for. If it's rusty, bad, because as the pistons move up and down the cylinders, if there's rust in there,
it's going to score all of the cylinders. And if the cylinders get scored, then it's going to get
oil blow past the pistons, which is going to lead to a smoky engine, burning oil.
It's not going to be good. But so far, not really any rust on the valves. And that's just on the
We need to see inside the cylinder. So really, the spark plugs is all under here.
So that's the spark plug. So I think that's going to be my next step of attack.
We're not in the all clear just yet. Even if the engine wasn't running,
but water was in there, it still can cause damage because of the rust.
Now, if there's rust, which has gone on the back of the valves, that could then cause the valves
not to seat properly when they go back into place, which would make the engine lose compression.
Another place where it might be rusty as well is inside the cylinder. And if it's rusty inside
the cylinder, as I mentioned, if we try and turn over the engine and there's rust in there,
then it could scratch up all the inside of the cylinder. And these are machined to perfection.
If we scratch it again, we can lose compression. So now I'm removing the spark plugs. So then
hopefully we can put a camera through the spark plug hole to see if there is any rust inside the
cylinder. So when you put the VIN in of this car on Carvertical, of course you can use it in UK
and US, we can actually see that one, this car was damaged, which we know of. Two, it's only done
about 30 miles because it was brand new. But three, this car has got a salvaged title. Alongside
that, we can also see a full timeline of the car, when the car was bought, when the car was crashed,
when the car got registered crash, and then when I bought it, which is actually really helpful.
And sometimes when you buy a crash damaged car, it'll actually show you photos of the damage of
that car when it was auctioned off at the car crash auction website, which is a really handy
tool to have when you're going to buy a new car. You can find so much history about it. Now my dad's
got the coil packs out and it's not looking great. They seem to be pretty wet. Once the coil packs
are removed, we can then start removing the spark plugs. I'm starting on my side first.
It's just condensation.
I've not even took the spark plug out yet. That came from the spark plug hole?
I don't think this engine's good, dude. I've not even took it out yet.
Well, it's certainly clean.
How is that in the cylinder? Matt, is there any part of this car that's good?
I'm beginning to think I've wasted my money. Only now are you thinking that?
Remember you can check your car out or your friend's car
with Carvertical and you can do that with the link in the description and using code Matt.
Hopefully it gives you better news than the condensation inside these.
Judging by the look of these spark plugs, it's not looking good for inside the cylinders.
You can see how rusty one of the plugs are. We're going to now put this inside the cylinder
and we should be able to see if there is any rust in the cylinder. Here we go. Big moment.
Here we go. Here we are. Oh my god. Lakes. Is there a fish in there?
Oh my god. Look, that's a rusty cylinder. Oh my god. That's submerged.
Oh, that's submerged. Oh no. That is really not good. All that water's still in there.
Yeah. Look, I'm under the water. Somebody help me.
The good thing is this car wasn't even broken in. Yes. I think that broke it in.
But we can't turn that over like that. No, we're going to have to see if it's on the inside.
If you put some ATF or Marvel Mystery Oil in there and then just let it sit, it'll loosen up
some of that. I mean, this engine had no miles on it. No. Look, I can even read the number.
That's nuts. Look at that. I can even read the part number on the piston. That's how new it is.
Look at that. Oh, what's all that? So it looks like there is some surface rust on the cylinders.
So turning over this engine now is a no-go. We've got to first make sure we get rid of all that water
and then find a way of cleaning off the rust. And we still don't know whether there's any
bent conrods or damage to it. So first, we put an airline down the spark plug hole to blow out
any of the water that's in there. Then we're going to have to work out a way of how to clear the rust
out. Remember, this is a six-cylinder engine, three cylinders on each side, and it lays flat.
So it's going to be tricky. Our plan now is to drop the engine down and then we want to actually
turn the engine on its side so then we can rest oil or some kind of additives on top of the
cylinders, which will hopefully soak through into the pistons and clear all that rust out of that
cylinder. And then also then turn the engine over the other way, do the same on the other side.
And then we've somehow got to get to the back of all of the pistons so we can soak oil through the
back as well. And in that way, we hopefully will be able to turn the engine over with all that
rust gone without damaging the cylinder. If it is damaged after that, then we're going to have to
take it apart anyway, but we're hoping not. That's our only option. So let's take this engine out and
we'll go from there. As for the rest of the car, I honestly have no idea yet. We're trying not to
think about that. We're trying to save one of the most expensive parts of it, which is the engine.
Let's get it out. We've never done this before and I think we should just start up here. Let's go.
This is ambitious, but we're not giving up yet. If we can save this engine and the gearbox, we might
just have a chance. But to even get to the top of the engine, we've got to take off the rear wing
and the little ducktail spoiler as well. And even then it's a struggle to get to. If you are new to
the channel and you're enjoying our ambition, now's a great time to subscribe. Yeah, look at that. That's
all for the rear wing system. It runs up in the arms. Oh my days, that is crazy.
We've had to cut part of the rear bumper off because it was so damaged,
it wouldn't lift off with removing the bolts. Look at that. That is from compression going that way
and it's kinked the whole chassis. How are you going to fix that? That is just bad, isn't it?
I literally could have bought nothing at this point. With the back now being exposed, there was
one thing on my mind which got me slightly worried and that was the engine's ECU. I remember from
last time it stored just above the engine and if this thing's got wet, it's not going to be good
news. So my first step is to try and remove it, then we can inspect it. Yes. Oh no. So this is the
ECU, the engine control unit, and normally these are sealed and they normally seal quite well. So
like if you do get any water on the car, it's normally okay but they don't really plan on
them being fully submerged and this feels a bit wet. Okay, so we're going to undo this little
casing. Do you think it's going to be wet inside? I think, yeah, I think some water's going to get
into it. Would that mean we need a new one if it has? Probably. I bet they're cheap.
Oh. Oh. No. It's like condensation. Oh no, that's milky. Oh no. Stick it in the sun. Yeah,
you'll be all right. Shall we? Yeah. Sure what, I've seen someone clean a toaster in a sink on
TikTok and it still works. It looks like the ECU has got a little wet but it doesn't look drastic
and it might be savable. So for now we've opened it up and we're going to pop it outside and leave
it in the Florida sun to dry out before we even think of putting power to it. Then it's back on
to removing the engine. We've got to disconnect everything from the engine that's attaching it
to the car. We've got coolant, we've got fuel, and we've got electrics. First off is the two
pipes attached to the engine. I have undone everything off it apart from stuff going to
the coolant tank here because that is all smushed up against it so I can't get to it. So I think if
we lower the engine down then it should be able to disconnect it from there. Then we've got to
loosen off the wheels whilst it's on the ground and remember how tight these wheels are. They're
only held on with one center lock nut so they've got to be tight and one wheel actually looks like
it survived as for the other. How light is that? That is super light. Oh my days, feel how light
that is. Yeah it's half a wheel of course it's going to be. No but it's still. This was a magnesium
wheel and you get these wheels when you order the YSAC package with the GT3 RS. It seems the
previous owner of this car specced it nicely. Unfortunately it didn't last long for him. Now
we think to take the engine out the best thing is to lower it all down with the rear subframe.
These wires are going to stay on the car so I'm going to disconnect these first like this. They
can come down. The caliper is going to come down with it which means we've got to disconnect the
brake line as well. The brakes are actually looking okay and I'm just disconnecting the
brake lines now. Then after that undoing the bolt which connects the wheel hub to the shock absorber.
Then I'm going underneath the car and undoing the bolts holding the gearbox to the chassis of the
car. After that I've got to disconnect the gear cable which goes from the gear stick to the
gearbox and some electrical wiring which goes to the gearbox as well has got to be disconnected.
And now we can concentrate on lowering the engine down which means loosening off the bolts which
connect the engine mount to the subframe and the nuts here which connect the subframe to the chassis
of the car. We don't want to unscrew them fully yet because the engine would just drop on the
floor. Then I can put a pallet underneath the car for the engine to sit on, lower the car down and
once the car's down on the floor we can start fully removing those nuts to lower the subframe
down onto the pallet. These GT3 RS's are built for the racetrack so removing the engine actually
isn't too difficult. I imagine so it's easy to service or do any repairs to if it does get damage
on the track. Yay okay oh and we have big damage here to the inlet manifold oh yeah there's a hole
in it which means there could be plastic in there as well oh great we're still trying to look on the
positives here we've still got a bit of a damaged engine but we're hoping it's not damaged enough
for it to break so staying on the main goal is trying to survive and resuscitate this engine
which means the pistons need to go up and down freely in that cylinder that's the main
goal to do that we need to tip the engine on its side because now you can see this engine
is a bit different it's called a flat six so we want to try and turn this engine that way now
to upwards then we could drop oil down in the cylinder and leave it to rest
but to do that we need to separate this gearbox from the engine then we could turn it that way
so our first step is to get this gearbox away from the engine we're hoping this is good as well
so the rs engine is out this thing looks crazy never did i ever expect in my life i'll be
working on one of these never mind taking the engine out of one remember i've had absolutely
zero training on this and my dad's never worked on one of these even before all of this is brand
new to us right here's our broken inlet manifold as for the rest how's it looking oh yeah
look what's in there look the valves they're meant to be dry
is that water why is it all orange it is water it's rust but all of that is rust in there
it's not looking good for the valves they're covered in water but now i'm moving over to
the other side of the engine to remove that side of the inlet manifold
and we can see what the story is over there but i imagine it's going to be similar
oh that's so rusty and you know even in this one down there look at this one
i've now taken off the exhaust from the engine just so we could access the front of it and whilst
i was doing that my dad was working at getting the gearbox separated from the engine by undoing
the bell housing bolts then undoing the bolts which connect the drive shafts to the gearbox
after that we can start pulling the gearbox away from the engine
and as expected it seems like a bit of water in there but we're hoping that by draining the
gearbox and just refilling it with oil we might be okay gearbox is off uh next thing i'm going to
take off is this big plastic which i figured out is where it stores all the oil for a car it doesn't
have all the oil in the bottom of some like a regular car it's got a dry sump so all the oil
is stored here which gives it better balance stops it sloshing about and stuff and it's plastic so
i'm going to take this off also this is probably full of water as well so last thing we want to
do is when we refill the car with oil when it hopefully runs is we don't want any water in here
right oh milky okay now we can work on the engine we now need to get this engine onto this
introducing our unorthodox technique we're jacking the engine up with help from rex and matt and
hopefully we can get it high enough to put some bolts with the engine stand into where usually
the gearbox connects to it so we've wedged open these butterfly flaps so we're going to do a full
360 of the engine and water is hopefully going to fall out this area and then once we've done that
we're then going to do a 90 degree turn and leave some fluid in in the spark plug holes
that is a crazy looking engine right there oh look at it oh my
niagara falls
right whilst it's upside down we've got to get to the underneath of the pistons as well
and the only way to do that is try and take this off we don't actually know if that's going to
see the crankshaft but it's hopeful but we can see what we're trying to get to here is the
crankshaft and on a flat six it's directly in the middle of the engine if we can get to this then
we'll be able to see the underside of the pistons so i'm hoping by just taking apart everything
that's in the middle of this engine we might actually be able to see it off comes an oil
cooler then a couple oil lines then i can start unbolting this bottom casing and finally lift it
out we haven't really seen much here we can just about see the crankshaft through there
but this here which i think is part of the oil pump because there's a chain on it
if we take this off this should help this isn't timed it's just on a chain constant there i'm
now undoing the bolt which holds the sprocket and the chain to the oil pump and i'm hoping that we
should be able to get this back on when we reassemble it my dad's putting some zip ties
through the sprocket in the chain to stop it from falling anywhere or moving on the sprocket
this bit here now is covering over the crank and all the bottom of the conrods and everything
which actually don't look rusty and dry it's good it stayed like moist this thing here we're not sure
what it is it seems like some kind of cradle or you might call it a baffle that's what we probably
call it in the sports world because you get a baffled sump and it's to stop oil starvation
on the bottom of the crank if we're trying to be specific and technical and i'm going to remove it
because i'm excited at removing this because we're going to be able to see so much more of the crank
yes yeah crank baby look at this it's a really different it's really hard to explain because
on regular engine you don't normally have just this so it'd be like just upwards here but this
is like they've attached another engine to the the bottom of the engine that's why it's called a flat
six because there's six cylinders here six in this here and it is flat baby there's three
sorry yeah three there's three there's three and it's that makes six and it's also flat which is
why i call it flat when you build these engine this crankcase actually splits apart which is
crazy as well but we do we're hoping we don't ever have to do that we're hoping this is as far we
ever have to strip this engine again and the only way we can save that now is because look you can
see here these are the conrods and the pistons right up through down to the cylinders there so
we actually can see the back of the pistons there which is good news so we're hoping what we can do
overnight is turn the engine this way so we're going to go 90 degrees that way leave the bottom
of those pistons soaking in oil and then the top of the cylinder soaking in oil then the other night
we'll flip it over and leave that soaking in oil and that soaking in oil then we should have got
the top of the piston soaking oil and the bottom of the piston soaking oil we should have seeped
through down the cylinders lifting off the rust and then hopefully we can turn over the engine
without damaging the cylinders and the way we can find out whether it has damaged the cylinders or
not is when we finally put it all back together turn it over and compression test each cylinder
and if each cylinder is holding the same compression that means it's good and if it's
not that means that we've scratched one of the bores going up which means that we're going to
get leak is that's what it's called in it leak blow blow by or something in it now we've got where
we needed to get to and to be honest it's looking okay all the conrods look straight so i don't
think this engine was running when it went into the water and nothing looks rusty under here so
it's time to rotate the engine upwards and get as much water out of it as possible
then i'm using this thing called marvel mystery oil which should break down the rust and lubricate
all the underside of the pistons which sit inside the cylinders i'm just using a syringe here to
suck it out of the container and then push it down the cylinders i've done the bottom side and now
i'm pouring it for a spark plug hole along with some wd-40 which of course is water displacement
and all of this should help ease that rust off right let's leave this overnight and we'll come
back and do the other side and day two we've let this soak now we've got to suck it all out
and spin it over and do the other side but i think it's actually looking good it's actually
looking really good it's not looking as rusty anymore but we will see so before we turn it over
i'm pumping out all of the excess fluid that we pumped in the day before and once we got out as
much as possible me and my dad can then rotate the engine back the other way around and then
our attention is paid to the other three cylinders doing the exact same thing as we did on the other
side pouring some of the oil for the spark plug hole to sit on top of the piston and then pouring
it into the crank casing to sit on the bottom hopefully this works now all of the fluid is in
the top side of this bit of the engine and the bottom side of that bit of the engine so hopefully
tomorrow we'll then be able to find out whether that's cleared all the rust out and we'll be able
to turn it over so we can find out then whether we've got a half decent engine but that doesn't
solve that issue so this 992 gt3 rs cost me 130 000 for this and we're struggling to find
one good part of it at the minute hoping that engine and the gearbox is going to be okay
so it kind of leaves us with a few options option number one which i thought was going to be the
best option was completely diminish this shell and get a whole new shell because there's damage
to the back the inner structure the outer structure the front tub the roof the a pillars
there's damage everywhere so if we can get a whole new shell and reshell it i thought that was going
to be the best option now that way we're working with everything back from scratch the problem is
i contacted porsche in the us they wouldn't sell me a shell because they make too much of the cars
in a complete form to take a shell off the production line to sell me one so then it left
me with contacting porsche in the uk and it was a similar sort of story there they wouldn't sell me
a shell because they're only making 2025 shells and this is a 2024 car so they can't sell me a
2025 shell for a person that's got a 2024 car because i'll be then essentially buying a newer
car so it only leaves us with one other option and that is to try and find a second hand shell or
attempt to fix this which is ambitious to say the least and i guess this all depends on as well
whether that engine and that gearbox is any good because right now we could have just spent 130,000
pounds on something which is just ready for the bin but let me know if you guys think it's worth
it thanks so much for watching this video if you enjoyed it hit the subscribe button hit
our thumbs up button and i'll see you in the next video what are you doing tony
i just can't deny
