美國紀錄片 第二次世界大戰中的日本武器-1944

军事と音乐搬运工
28粉絲
215 次觀看·2025年1月9日
軍方專家深入研究了敵人的武器
在這張圖中顯示的日本小手槍
是敵人常用的
一般而言,雖然它們的武器非常服務性和精緻
但在設計上、耐用性和效能上,它們遠遠落後我們
這裡有兩枚被捕的日本武器
最高的一枚是Arasaka Model 38
一枚25毫升的武器
下面的一枚是新的Model 99,303毫升的武器
這枚武器快速地取代了M38在大多數劇院
M38採用了標準的Bayonet Model 19-5
這枚武器可以輕易拆除,只需要向前滑動
按下清潔桿釋放桿,以釋放最長的清潔桿
桿子是一般的前桿
是一種打下葉的後桿,可達440至2640米
這些桿子無法滑動或吹風
M38是一把5槍的槍,與我們自己的Springfield非常相似
櫃子的櫃子可以在釋放桿的前面位置內部按下釋放桿
拆除桿子時,把桿子完全拉向後面,並在釋放桿子的左邊位置拉出桿子
拆除桿子的塑膠蓋,將保險桿一半轉向右邊,然後拆除
接著,拉出發射桿,然後是Springfield
它們會回到相同的位置
桿子的塑膠蓋是在戰鬥中拆除的,以確保桿子能靜止運作
這是最新的日本手榴彈,Model 99
手榴彈通常是塑膠塗層,使用手榴彈的唯一用途
手榴彈彈簧或手榴彈彈簧,使用手榴彈彈簧發射
手榴彈彈簧與M38相似,使用方式也相似
像M38-2,拆除桿子時,手榴彈簧會自動移動
這個手榴彈的後背裝甲是用來追蹤空中目標或移動空中目標的
塑膠簧的後背裝甲必須被壓緊,才能把手榴彈簧關上
這個手榴彈簧的支架更大,以防止手榴彈簧被射擊
手榴彈簧的牀板是用來避免損壞,並允許快速下載
手榴彈簧的彈簧模式與M38相似,同時可以拆除
首先是塑膠蓋,然後是安全,發射簧,最後是手榴彈簧
這是M38和M99
M99的手榴彈簧,下方的手榴彈簧,是用來適合日本士兵的身體狀態
兩支手榴彈簧可以發射5個圓形的彈簧
M38的手榴彈簧,右邊的長筆彈是用來發射的
M99的手榴彈簧,是用來發射的
手榴彈簧像是我們的手榴彈簧一樣,可以發射
M99的手榴彈簧,也像手榴彈簧一樣,可以發射
M38的手榴彈簧,沒有發射簧,也沒有發射彈簧
日本士兵覺得很實用,可以當作射擊手
這是日本士兵的手榴彈簧,尺寸是9毫米
是用來發射的,是空調的,是用來發射的,是用來發射的
用來發射的,把手榴彈簧推向後面
保障引起的膠盤,放在手榴彈簧的前方
手榴彈簧可以在前尾或後尾位置上 suffering
來打開保障堅固的蓋子
接著把蓋子掉下來
第一件就是扶手榴彈簧的前面
交叉手榴彈簧的後板也要被托起
接下來是要把軸承托住
彈藥棚的彈穴就會滾出處理器
彈藥棚的彈穴的點放在這個洞裏
會解鎖彈藥材,然後就能夠輕易地提取
這是彈藥材的分離
彈藥材被打開是因爲把彈藥材的固件釘拔出來
彈藥材的開鎖第一端能夠通過彈藥材的尾端去取出
它是通過刺入彈藥材的尾端,轉右或右半旋一旋
This is the Solothurn submachine gun in a field strip disassembly
The grenade discharger, Type 89, is widely issued in the Japanese Army
The enemy has developed a variety of uses for this weapon
This is the Type 89 shell
It's inserted into the muzzle end of the barrel, fuse end up
To decrease the range, the range control head is turned clockwise
To increase, turn counterclockwise
The discharger is fired by holding the weapon in the left hand
And pulling downward on the trigger with the right
The same method of loading the piece is used in firing the 97 HE hand grenade
The same procedure for increasing or decreasing the range is followed
And the weapon is fired in the same manner
This is the Japanese Nambu light machine gun
Caliber 6.5 mm, model 1922
It's gas operated, air cooled and is fed from a 30 round box type hopper
After filling the hopper, the follower is lowered
And the gas regulator is adjusted for smooth operation
Preparatory to firing, the rear sight, which is of the sliding ramp type, is adjusted
There is no provision for windage made on this sight adjustment
To steady the gun for firing, notice that the stock is grasped firmly in the left hand
This gun is equipped with a safety
Safe is in the forward position, fire in the rear
The weapon is cocked by pulling back on the cocking handle as far as it will go
To field strip, the hopper may be removed
By exerting a backward pressure on the feed housing lock with the thumb of the right hand
To remove the back plate, turn the lock pin a quarter turn to the left
And drift out left to right
Then the back plate and the driving spring can be removed from the receiver
The driving spring and rod are separated
The entire operating mechanism comprising the piston, piston rod, piston rod extension and the bolt
Are removed from the receiver
The bolt is detached from the piston rod extension
Move the cocking handle to the rear position
To separate the trigger group from the receiver
The retaining pin must be drifted out from right to left
The trigger group will then slide off to the rear of the receiver
The barrel jacket is locked to the receiver by a lock pin
After it's removed, unscrew the receiver
The barrel slides easily out of the barrel jacket
The gas regulator is unscrewed by turning counterclockwise
The gas piston tube is removed from the barrel jacket by pressure rearward on the tube
The functioning and disassembly of the Nambu light machine gun
Is very similar to that of the heavy machine gun which follows
This is the Japanese heavy ground machine gun, model 92
The caliber is 7.7 mm
It is gas operated, air cooled and is fed by 30 round plate charger
To get it into action, remove the tripod carrying arms
Then insert the 30 round plate charger into the feed way
The cradle elevating mechanism is unlocked by turning the lock handle one quarter turn
This frees the wheel which lowers or raises the cradle
To traverse the gun, squeeze tightly on the traversing lock handle
Then turn it counterclockwise a half turn
To lock the traversing mechanism, reverse the procedure
There are two ways to elevate and depress this weapon
It can be done manually by unlocking the elevating hand wheel
And turning the lock handle a half turn counterclockwise
Or mechanically by locking the mechanism and turning the elevating hand wheel
On this gun, the trigger acts as the safety
To place the gun in the safe position
Turn the trigger a quarter turn counterclockwise
Adjust the gas regulator for smooth firing
To field strip the weapon, release the plate charger by pulling outward on the holding pole
Then pull back on the cocking handle as far as it will go
In freeing the bolt, pull outward on the holding pole to release it from the operating slide
By pressing on the trigger with both thumbs, the bolt is released
To elevate the grip, press in on the grip locks on either side
Then remove the gun from its mount by pulling out on the elevating arm lock pin
And releasing the locking catches from the gun cradle lug
The telescopic sight may be removed by turning the lock screw counterclockwise a half turn
The lock pin has been removed and the back plate can now be separated from the receiver
Next, the driving spring comes out
And the buffer is lifted off the driving spring rod
The operating mechanism consisting of the piston, piston rod extension and bolt comes out of the receiver as a unit
Separate the bolt from the piston rod extension
Then remove the firing pin
Now the bolt lock can be separated from the bolt
Before the cocking handle can be removed from the receiver, it must be in the rear position
The gas regulator is unscrewed from the gas piston tube
And finally remove the oil reservoir which is held in place by a retaining screw
This reservoir is used to oil the cartridges before they're fired
As this gun does not have an initial slow extraction
The Japs used this weapon in several different ways
As a light anti-aircraft gun and even mounted on some of their tanks
Here they are again
Japanese army weapon
Rifle, the model 38 and the newer model 99
The Solothurn submachine gun
Type 89 grenade discharger
The Nambu light machine gun, model 1922
And the heavy ground machine gun, model 92
Knowing something about these weapons may prove mighty useful someday
