How to Whittle a Simple Cat - Easy Step By Step Beginner Wood Carving Project

Carving Art Channel
11 followers
Hi everybody, this is Brian from Carving Is Fun and today I'm going to show you how to
whittle a very simple and quick kitty.
This is a great little project for beginners, those who want to get into whittling.
You don't need much to make it, all you're going to need is your preferred whittling
knife, a pencil, and a 1x1x2 inch piece of basswood.
If you have 4 inch piece basswoods, just cut it in half like I did here, you'll be fine.
Now if you're also whittling along with the video, if at any time you feel like the video
is going too quick, just go ahead and pause.
I'll also have a picture of the current step on the left hand side of the video, that way
you can keep up easily.
Alright, so let's get to it.
First thing we're going to need to do is draw out a basic outline.
Now this does not need to be perfect, it's just showing where certain cuts are going
to be at the very beginning.
I drew out a little bit more because I wanted to have a little bit more visual to show you
what's going on.
So what we have here, top of the head, I wanted to make sure we left enough room for the ears.
This is going to be the top of the nose, the bottom of the nose, and basically this line
is where the little cheek puffs are going to be.
These lines right here are representative of the back legs, and this is going to be
representative of where the front paws are going to be.
And then, now all we need to do is just start making our cuts.
Now it's probably easier to start doing the sides like this first, get the sides of the
head taken care of, yeah, good.
And then we're going to take this part and go back.
Don't worry about all these marks that are there, that was just to help show you that
we're leaving room for the ears, we're going to leave some room in there for them.
Probably take it back to about here, not work for now.
And then we're going to take the bottom of the cheek and do the top of the leg.
So since this is going to be more angled, we're not going to go straight in, but we're
going to go in a little bit more at an angle, so kind of like an angle like that.
This one we're going to go straight in though.
There we go.
That's good.
Do the same thing to the other side.
About deep enough, take care of this side here.
And we'll clean that up a little bit later, just the basic rough out for right now.
There we go.
And then what we're going to do from here is take the front area right here, and since
cats have a pretty slender upper body, or at least this one is going to, we're going
to go in a little bit further at the top and then it's going to come in a bit shallow at
the bottom, so if we're looking at it from this side, it's going to come in like that
and then come straight, kind of like a triangle.
There we go.
And a little bit of room there for the feet.
All right, now that we have that, start rounding out the face and upper body here.
All right, let's start doing the ears now.
Now I don't want to cut through all this material at once, so we're going to cut through the
back.
Now for this one, I have the tail going up towards about the middle of the head, so we're
just going to have it about right there is where the tail is going to end, and bring
this back towards the front of the head.
That way we can get the ears cut down properly a little bit more.
And then this, we're going to shave it back.
All right, and then we're going to put a cut in the middle and then go in at an angle.
Go down a little bit more, that way we can have a shape to the top of the head.
Yeah.
There we go.
Give the ears a little bit more shape in the back.
Now cats don't have this huge nose.
Now if you want to make it more like a fox, then you're already on your way to do that
right there.
You can just divert it, make it more of a pointy nose for like a fox kind of thing,
but cats have this very cute little itty bitty nose, so we're going to cut that down a bit.
First, I'm going to angle at the bottom.
And then we're going to start rounding the nose down a little bit here.
Just basically flatten it out at the beginning.
Not too much though.
There we go.
Like this one, we're just going to go in and add a couple angular cuts and make it
look like a cat face.
Kind of like that.
And the bottom is kind of rounded up a little bit.
There we go.
Very simple cat face.
Now we're going to start rounding up the cheeks and the neck.
Alrighty.
Now let's trim down these back legs here that we have.
They don't need to be that big.
We're going to make them rounded a little bit like I have here.
A little bit more.
Yeah, make sure it's even.
Take out this little bit there.
Now I have a little bit more room to clean up around the underside of the neck.
There we go.
Looking good.
Now from here, we're going to cut downwards like that towards the bottom.
That way it sort of has like an hourglass shape to the bottom here.
Yeah, like that.
Do the same thing to the other side.
A little bit more.
Yeah, it looks about right.
And then we can start rounding off the front and back and the top a little bit here.
There we go.
I am going to bring this in a little bit here.
All right, let's define the front part here.
So legs are going to be kind of like that.
So maybe a little bit of a skinnier cat than what I had originally planned,
but I think it still looks pretty good.
I myself don't seek perfection in any of my carvings.
I just like to have fun while doing it.
And that's my primary goal is to have a good time.
Otherwise, there's no real desire to do any of this stuff, right?
All right.
There you go.
Let's trim up the front of the paws a little bit.
Then I'm going to put a little cut in the middle so you can see that there's two paws.
That's good.
Now if you're liking the video and you want to see some more of my carvings,
go ahead and hit the like and subscribe button.
I have plenty more videos that you can go and check out for inspiration.
All right, now we got to get to the tail.
This cat's going to have a bit of a puffier tail.
So I'm also going to put it at an angle so it has a bit of a narrower base,
but it widens up towards the top.
There we go.
Let's do the same thing to the other side.
Even that out a bit more.
There we go.
Then start angling the tail in.
There we go.
I'm trying to find the tail from the body a little bit more.
Separate it out.
It's looking pretty good.
Yeah.
All right, let's round off the tail a little bit more.
My tail is a little tapered down towards the body.
So let's taper it towards the body a little bit.
So it looks like it's coming out of the cat.
There we go.
we're almost there.
There we go.
Yeah, I'm going to call that done for right now.
You can add more detail to it if you want.
Finish up some of the extra bits of it.
Round off some areas.
But yeah, I'm happy with how it turned out.
Yay.
All right.
Don't forget to like and subscribe everyone.
Thank you for watching.
Have yourself a good day.
