I Bought a DESTROYED Porsche 911 Turbo S At SALVAGE AUCTION!

Ex Used Car
15 followers
Guys, welcome to episode two of Smoked.
This is all about the absolute destruction we see on a day-to-day basis in the auto salvage
industry.
We started the series with the C6 Corvette, and now we're stepping it up.
One of the most iconic cars to ever come out of Germany, a 2018 Porsche 911 Turbo S.
Hey, dawg.
We're in for a busy night, bud.
No, I'm filming you, you're filming me.
This isn't how this is supposed to work.
Should I stop filming?
No, I think you should stop filming.
You have a $10,000 Corvette.
I have a $220,000 Porsche.
Yeah, I bought us a gym.
I don't think it's supposed to do that.
Look how far back the floor is just gone.
Literally flexing here and here.
Oh my God.
It's all the way back to the tailgate.
You can see the quarter panel going up.
Wow.
That's next level.
So we stepped the game up a little bit this time.
This isn't a little low risk Corvette.
We got some money in this thing.
This better turn out all right.
When we brought that C6 in the shop, I thought that was one of the worst cars I'd seen in
a while.
This one, it might have one-upped it in the damage department too.
This thing is gnarly.
That car was so mangled we had to uncover damage.
This car shows you everything.
It does.
It's all there.
It's just a matter of how far under there it went that we can't see right now.
Absolutely.
What do you think we're going to do getting this on the lift?
So this is going to sound crazy.
I don't think it's going to be too bad.
Because you have a subframe right here, we can put it normally, this mount would be all
the way out here.
Right about there on the pinch weld.
So we got about a foot to go inside to get it on the lift.
That I'm not worried about.
Back here I am.
What about it just flexing when we lift it?
I don't know.
We're going to have to go really far in.
You have to hope there's a point right in that area that's strong enough to lift the
car from.
You would hope so.
I'm not going to trust.
No.
Oh my God.
Not a chance.
I mean, frankly, this lock seatbelt is probably doing more to hold this thing up than the
structure is.
You want me to get that out of the way and we'll see how much it flexes?
Yes.
A rule of thumb in the smoke series, if somebody says, hey, do you want me to cut that?
The answer is always yes.
For those of you who watched the last episode, that was a brute force rear end impact.
This one, this whole passenger front side just got sheared.
It honestly ripped this thing open like a Burmese soda can.
Accident reconstruction.
You got to put in the comments what you think actually happened to this thing.
I have my theory.
I think that it hit the end of a guardrail.
I was going to say the same thing right in here and it literally cut into the car.
If it was a pole, you'd see more, more damage up high here.
Not that this isn't a ton of damage.
So as you're watching, keep it in the back of your mind, try to figure out what happened
to this thing.
We're going to be doing the same.
And if we see anything obvious as it's coming apart, we'll definitely clue you in.
One other quick note.
In the last episode, I jokingly said, Hey, who wants this damaged Corvette emblem?
In like 150 you guys messaged.
We obviously only had one to give away.
So 149 of you went home empty handed.
When the cars allow us to, we're going to try to keep it a thing in this series where
we have a couple of souvenirs, can do something with it, whether it's sell it.
If it's something we can ship for free, we'll do that.
We have all kinds of ideas in our heads, including things we've seen on other YouTubers channels
like Goon Squad, Whistling Diesel, all those guys that you guys probably already know.
So if you possibly want to have a piece of this Porsche, definitely stay tuned.
This was like a $600 option on this car.
Here we go.
Give me another slice of that.
I don't know.
This might be dumber than the Corvette emblem, but this was an expensive option for somebody.
So in some way, shape or form, I will have details in the description of how you can
get this piece of red seat belt.
And by piece of red seat belt, I mean multiple pieces.
Well, after I keep that one for myself.
Genuine Porsche webbing.
He's an upholstery guy.
That means something to him.
Is all webbing not the same?
Nah, that don't mean shit.
You guys just like these Porsche stuff because they're so damn fancy and they're not.
I thought I genuinely thought he was going somewhere special with that.
Nah, I was giving myself a segue to talk crap about Porsches.
And yes, I know I'm not saying it right.
Oh, I already screwed it up in the intro.
It's all right.
I'm not changing the way I talk.
It's that simple.
You know, if this was a GTO, I'd say we strap a forklift to it and rip that thing backwards.
But we have expensive stuff back there we need to keep nice.
So we're not going to do that.
I'm pretty sure the damage parts on this car are worth more than good condition GTO parts.
That's very true.
So obviously, when I saw that, I knew this wheel wasn't going to be any good, though
I did see it hanging out like this.
So I wasn't sure if the rotor was going to be good.
The caliper.
Fortunately, it does look like some of that survived.
But this wheel, oh my God, it is completely bowed, not to mention ripped in half.
So there's that.
That lip might be wavier than the piece of bacon I ate this morning, but that sure does
make a phenomenal piece of wall art.
If you've been wondering why we've focused on this side of the car, well, that's because
this side is really not that bad.
Kind of looks like a normal Porsche if you.
There you go.
She's ready to hit the Autobahn.
Oh, buddy.
Aside from the console being popped out, this side looks pretty normal.
Pretty normal, except the blown airbag and all the dirt and the locked seatbelt.
Oh, yep.
More souvenirs.
Fair, fair, fair point.
Maybe more souvenirs.
You cut that one up too.
So I wasn't joking when I said this was a $220,000 Porsche earlier.
This is one of the highest optioned Turbo S's I've ever seen.
This stupid little Porsche crest in the armrest there, super expensive.
This red stitched dashboard, stupid, stupid expensive.
Side note, this may be the steering wheel going in my 997 Turbo, we'll see.
But this whole car is just specced beautifully.
It's kind of bland on the outside, just plain black with carbon ceramics.
Nice looking car.
Once you get in the inside, it really starts to pop.
Have you tried to put power to this thing?
I have not.
Are you scared to put power to this thing?
I'm never scared.
I think we should see, because I want to pop the decklid anyway, and we get that power
for that, right?
Yeah.
Get the damn jump box.
Let's go.
Am I scared?
Well, hold on.
What is that?
That's, uh, is that the gas fill?
Oh, yes.
That's 100% what that is.
Good call.
That is the, that is the gas filler neck.
Well, missing the neck portion.
Oh, I'm, I got something going on.
Let me, let me hop in for a closer look.
I don't know.
It almost feels weird to be sitting in here.
It's dash is wrapped around me.
Uh oh.
I just got the windows.
Well, there's that.
Felt like we had something, but this fuse box slash relay area slash wiring harness
is just, is that the, that's the front.
That's not the one we need.
Yeah.
So the hood latch works.
This headlight is on and working.
That is unfortunate because we do need to figure out how to get this open tonight.
Whoa.
I don't know what's going on with this car.
Now, while I can stay out here and look at this car all night, it's time to take it inside
and get to work.
This damn camera, man, I gotta, gotta keep it filming, you know, don't worry, I'll get
it.
It's going to be just like this.
It is go time.
And tonight, unlike the first episode, we have help.
Fernando's joining us tonight.
Austin is around here somewhere.
He will be joining us momentarily.
We're going to get this thing racked up.
I'm still terrified to get this on the lift.
I have no idea how it's going to sit.
What are you wearing?
You went and changed.
It's a Porsche.
For this.
It's a Porsche.
What are you wearing?
Just a regular t-shirt?
It's a Porsche.
I mean, look at us.
I'm disgusting sweaty already.
I haven't even touched that car yet.
Dalt looks like he's about to play 18 holes.
I don't know where.
I'm going to let Karen do this part.
I can't get my Polo dirty.
I'm going to go right in there.
I don't know if anything in that corner is strong.
Why don't we just put it right here?
She ain't going nowhere, right?
No, she ain't going nowhere.
Do you want to try and jack it at some point, just to see what happens?
We were just speculating about how long this was going to take, started to get it on the
lift and now we've undid everything just to f*** something up.
Hold on, let me get the jack point.
Is there a jack point?
Yeah, it's right there.
Right there.
That's incredible.
I almost thought this wasn't going to do the series justice because that first C6 was so
jacked up.
Oh, this is justice.
That's sketchy.
The day we go to put a car on a lift in one of these episodes and it goes on there smoothly,
just cutting it right there.
It's just not a smoke type car.
All right, try it right there.
We need to be lifting from further back.
Yeah, I know.
Try and do some of the body panel stuff while it's just sitting here before we put it on
the lift and get like as much weight off of it as possible.
Yeah, we can pull up the muffler.
We can drop some weight off the back end.
A little bit safer for the viewers.
We know you guys love safety.
Now one issue we have, we cannot get this trunk popped at all.
I read online, so take what you will from that, that there is an emergency release behind
the passenger fender liner.
Now we have to get this center lock off without putting it down on the ground.
This wheel is locked because of the e-brake, right?
This got power cut with the e-brake on, so hopefully we can break this thing loose.
Oh my goodness.
That's nuts.
Let's see if this one like flexes less.
Oh, yeah, nope, nope, nope.
Oh, wait.
Three quarter inch drive.
Yeah, that's what we needed all along.
Yeah.
There we go.
Don't worry, I'll take it from here.
That was tight.
So that was rubbing on there, and that got a little sketchy because the last thing we
wanted to do is hit this right here.
Well, I don't want to put all my weight on it if it just like snaps.
We're going to have to wait on that.
We got to put it on the ground.
We still got to figure out how to do that one.
You want to try and do that now?
Yeah, why not?
It's nowhere near the ceramic.
It looks like it's...
Oh, shit.
Are you okay?
So we're on the same page here.
We've been dreading this since this car came in.
We knew this was going to happen.
Let's rule out the easy way with an impact.
Guys, I know this isn't typically the way you're supposed to do this, but just look at it.
That's around the right caliper.
Flip it on its face.
Very slowly, please.
Okay.
I did damage the caliper just a little bit.
Yeah, but that's still usable for somebody.
Somebody could do something with this.
This is really in the spirit of Smoke Tear.
This is where things start getting good.
Rotor's already trashed, by the way.
We were all worried about it, and this rotor is totally trashed.
No additional damage to the rotor.
It did well.
That's certified Porsche Tech stuff.
I mean, I know I don't look like it, but he could pass as a Porsche Tech.
This is an awesome piece of waller.
I don't know what we're going to do with this yet.
We might put it up on the site for a few bucks, so one of you guys has the chance to get it,
or it may end up hanging in the shop.
Once that aside, I'll put it in the description.
It's a beautiful caliper still.
This is peak suspension damage right there.
Wow.
Axle, gone.
I don't know how it came apart, but it's apart.
Tie rod, absolutely destroyed.
It actually broke it halfway through the threads there.
That's wild.
Some control arm, broken.
A very expensive magnetic shock is...
I don't know, what do you call that, a 20-degree angle?
Yeah, that's pretty gnarly.
This carbon ceramic rotor hat is actually still good.
This didn't sustain any damage.
This piece in here, still good.
I'm going to go ahead and pull this off, and then once again,
I think we're going to have a sick piece of wall art.
It's broken.
I can tell, it's broken.
I guess this is the first of many trips to the scrap dumpster.
Hurry the hell up, I got to test this one.
Now we're going to have some fun.
As Meatloaf would say, three out of four ain't bad.
We're in the long, tedious process of getting all of that off while...
Yeah, that.
I thought of exactly how I want to give this away.
You have seven days from the time this video releases.
Go down in the comments, tell me what you would do with this.
Tell me what you would use it for, what kind of art you'd make with it.
Don't tell me a clock.
Everyone's going to say a clock.
You got to bring it.
You got to do something cooler than that.
I'll pick the coolest one, and I'll send you this thing.
That is, unless I decide to keep it for myself.
So you guys better bring it for real.
Now that I got my own channel, I'm going to comment and say
I'm going to hit Carrington over the head with it.
That should definitely win.
You won, buddy.
Wait, I forgot to elaborate here.
I'm the judge of this.
This isn't no, like, by likes committee stuff.
I'm the damn judge.
I pick who wins.
Dictator.
Feels like the tail light has to come out first.
I don't know how that's going to happen.
Shut the f*** up, bird.
What the f*** is going on?
They got a party on.
Jesus.
It's been, like, an hour.
We're not really that much further on the car.
Our biggest issue here is we cannot get the trunk open,
which we very clearly need to do.
On the early 991s, there is a cable that runs down here in the passenger quarter.
It's not the same for the newer ones.
The 991.2s, it's a very short cable that sits right about under there,
which helps nothing.
Now, you can access it by removing the rear bumper,
but to the best of my knowledge, to remove the rear bumper,
we have to pull the tail lights.
So the only thing I can come up with at this point,
I think I'm going to try to open up a hole in the rear quarter panel,
see if I can access it.
What's funny?
They're always talking to us about safety in these videos.
Safety.
I don't know.
I know it's hot.
That's why I wasn't hanging on to it.
Why don't we autograph this and give it away?
What's our autograph?
Yeah, we'll sign it.
Fernando, you sign it, too.
We'll give this thing away.
It's 150 bucks.
If anybody wants a cut-up piece of a Porsche for nothing,
put it in the comments, and I will randomly pick somebody.
Sign it dog, please.
Dog money, baby.
I guess, once again, seven days after posting,
if you want this thing for some odd reason,
put it in the comments.
I'll randomly select somebody.
Fry bar.
What's he doing just standing there?
Can you clean that grease off for me, please?
Eat a dick.
Bigger fry bar.
Open her up like a can.
It's going to be coming from right around here,
from my understanding.
Now we can run a Sol-Sol down there.
Oh, good thinking.
Yeah, that'd be more accessible.
That's not how it's supposed to be removed, I don't think.
I'm going to bet.
There's a wall here about right here.
I'm going to bet you have to be on this side.
There's definitely somebody watching this that's like,
I know how to do this.
It would have taken you guys two minutes.
We don't know how to do that, though.
I see a cable.
I can't see the end of the cable.
You just see a bare cable?
I just see a bare cable.
That is the one.
If you've ever used the absolute wrong tool for something,
that's this.
I have it in the pliers right now.
I just can't do anything with it.
I'm opening up that now.
Just like you are.
A little bit more.
Right there.
That.
That's it.
I'm going to switch my hand around.
That is it, though.
Where are your index fingers?
Right there.
That.
No.
Oh, come on.
Get this stuff off.
It's that.
This is what we need off.
I'm selling my force.
This was stupid.
Two multiple releases.
No, I don't know.
What releases?
Oh, does this not?
This might be just a straight spoiler assembly.
So, we accomplished something.
We don't know specifically what yet, though.
Things are coming.
That's the tail light right there.
Right?
No, that's the spoiler assembly.
Let's go order dinner.
Yeah.
Wait.
What happened with your shirt?
This shirt?
Can you turn it around?
Oh, my.
So, if this ever happens to you,
I don't know what to tell you.
You're not going to be able to do this
because we had to go through three layers
and I'm assuming you don't want to cut your corner panel off.
Victory.
I thought the 997 turbo apparatus,
drivetrain, whatever you want to call it,
was big.
This is massive.
That's what she said.
This is the good news.
The even better news is we get to do it all again tomorrow night
because we haven't even got to showing you guys the damage on that.
And after all, it's the point of this video.
We will see you guys back here way too soon.
How are you feeling tonight?
Tired.
Already?
Just got started.
I mean, I can tell you're ready with the Kobe drink there.
Mamba forever, baby.
991 turbo night two.
Hopefully, we can finish this thing up
because I am not going into a night three on this car.
Already covered in anti-seize
and with Austin trying to figure out this parking brake.
Basic theory here
is that it should just be power in, power out.
Got to be.
One's on, one's off.
Hopefully.
Yay.
All right.
So we were right.
Nailed it.
You want to throw this in the souvenir pile with the other components?
I really doubt someone's going to want this.
The e-brake jumper cable.
It's functional and cool at the same time.
Well, I guess we're adding it to the pile.
So we're already off to a better start than last time.
Last time, you guys know, kind of sucked.
Tonight, I can feel it.
It's going to go great.
I'm not going to lie, guys.
The stuff that came out of this,
much better than what came out of my car.
I know I'm going to take a little safety precaution here.
Safety precaution?
As I always say, safety first.
We're going to run a bolt through this
so it doesn't fall on my face.
Uno turbski.
Can you actually make this turbo fit into your car or no?
Nobody in their right mind is putting this turbo in a 997.
Why?
You've got to do a big turbo.
You can't move from one little turbo to another little turbo.
I don't know if you guys can hear
what's going on in the background right now.
You're here for a treat tonight.
He's having way too much fun out there.
He looks so happy now.
Hey, quick question for you.
How long did it take you to get that running?
Probably like an hour.
If you couldn't hear him down there,
he said a freaking hour.
Ah, there's a freaking piece of shit sway bar in the way.
It literally goes through a freaking hole
between the trans and the block.
Dude, it is just big enough for the goddamn sway bar itself.
F*** this car.
I know we're like a minute maybe into the video tonight,
but it's getting us again.
It's happening again.
Just look at Austin's arms.
Don't look at me, Austin.
He didn't even get beat up by a Porsche.
He got his ass whooped by a steel saw.
It's alright, because that saw is about to beat the shit out of this Porsche.
We're pulling that dash out,
getting down to the damage in this car,
cutting the shit out of it,
and we're done.
Alright?
I don't even think I'm taking this thing to scrap here.
I'm literally just dumping it in the f***ing dumpster.
I don't have to look at it again.
All that talking he was doing about Porsche engineering earlier.
Alright, Porsche.
You're not as dumb as I thought you are.
You're not as dumb as I think you are.
You're not as thought as I dumb you are.
Yep.
If that one marketing guy at Porsche is watching this video like,
I'm a Porsche fan.
He's special.
He's not all there.
I can still take that sponsorship.
I'm the Porsche guy.
It's alright.
I'm cool.
We don't have to put him in any more videos.
We'll cut him out of these videos.
I'll blur out his face.
Whatever you need me to do.
So you're telling me I never have to work on one of these pieces of crap again?
Because I'll take that deal.
Somebody lock it in.
Do I have his hand?
I need to shake.
I'm doing it.
Sounds like we got it all worked out.
We're just waiting on you, Porsche.
I'm going to pull this turbo off.
I'm going to call that a big old win for this.
And then we're going to start cutting stuff up.
Yeah.
Turvski dos.
Thank all those people in the comments of the Porsche videos that we do.
They call us dumb hillbillies that should stick to working on Corvettes.
We're right.
I'm not going to argue with him at this point.
It's just cool how this is set up.
It actually has like a separate structure that the visor bolts into.
So when it ripped the roof away, it just ripped this away from the roof.
It didn't actually break the visor.
You said it was really what?
Oh, I didn't say that.
I don't even remember what I said.
But if it was some sort of complimentary adjective, I'd take it back.
Man, why didn't I just frigging already cut the roof off of this thing?
It would be so much easier just like that other car.
Is that the whole floor?
Oh my goodness.
Uh, okay.
I can see the ground next to the trans tunnel right here.
It's the only tool we need on a car like this.
You mind handing me some safety goggles?
No.
Just a question, guys.
Is this what you thought you signed up for when you chose to watch this long in the video?
You happy with your decision?
Oh, wow.
Look at that pan.
Look at that giant floor support that it just ripped out over here.
All of this, you see where this is all broken?
That's all from the ax.
That's insane.
Look at the transmission tunnel right there.
Oh, wow.
It broke.
That's all the way up here.
Look at that, yeah.
That's gone.
That's broken right there.
That rivet's almost ripped through.
You can see where it's moved.
Do you think you can fix that up with a self-tap or what?
Oh, easily.
No problem, yeah.
Oh my God.
Well, it's heavy as hell.
What the hell was that?
That was a module of some sort.
Oh, the amplifier.
Nice.
It's only got a little bit of damage to it.
Wow.
A question for you guys.
Have you ever seen a seat fall through the floor of a car?
This is some real Fred Flintstone-type shit here.
Straight down right here?
Yep, I got it.
Yep, we got it.
Wow.
Everything that you see right here, everything that you see right there, and everything that
you see right there is from the accident.
The under-the-seat VIN plate just fell out.
Pretty cool giveaway, right?
The VIN plate from this video?
It's not bad.
I'm going to do one better here in a second, don't worry, but add this to the list.
You know the drill.
Everyone who puts the exact phrase, I want the stupid VIN plate in the comments, seven
days later, I'll pick one, send it to you.
Just FYI, I'm not sending you this whole damn thing.
I'm cutting it out.
I'm saving it on shipping.
Oh my God, this feels so wrong.
I know you're taking joy in it, but it does not feel right.
Just go straight across the bottom there.
That's sick.
Do you know how common embossing is on 991s?
Only really high option 997s and 996s came with embossing.
This is definitely a high option car, but if you guys know how common this is, definitely
put it in the comments because we obviously need some Porsche education.
Look at the detail on that, where it's literally the exact same as the front emblem, where
you can actually see the individual letters.
Literally, I can saw all through that if you want.
Yeah, let's get this out.
Now, we finally get that look behind the dash.
There you go.
I feel like this is like the old baseball card collector in me.
You know, I see this cool stitching and I want to cut it out.
You make yourself like a necklace.
Make your girl something nice for Valentine's Day coming up in like, I don't know what,
five months from now.
One of one red stitched out of a Porsche dashboard.
Add it to the pile.
Some roof removal.
Didn't go as planned.
Unfortunately, I missed it.
We're about to cut off this quarter, but first, let's see that damage that I wanted to see
behind the dash.
I've been like so hard up on that for two nights now.
There's still a bunch of broken HVAC in here.
Here is an undeployed passenger knee airbag, but this is the aluminum dash brace and it
is like a 20 degree angle.
This thing took it.
This is like the upper frame rail of the firewall.
That's an even harsher angle than this.
See, the nice thing about your Porsche not having a floor in it, when you break the sunroof
glasses, it goes down to the actual floor and then you can just sweep it as opposed
to having to vacuum.
Radiator still has some fluid in it.
Do we have a different name for radiator fluid or am I just making that up?
Radiator fluid, is that the word?
Coolant.
Oh, that's what it is.
That's a 10 mil.
You know that comes off.
It's not perfectly attached, right?
Did I almost punch you?
No, he almost got me.
Oh, I didn't feel like I hit you.
I think we're finally at that point.
It's time to use the best tool in the shop.
Man, that looks freaking cool.
That's one way to do it, gentlemen.
Mission accomplished.
And I suppose, on that note, that's about a wrap.
If you've been watching this far in the video, you're obviously already subscribed and if
you're not, well, here's your chance.
I'll sit here and wait and I want to go home, so please do it now.
I hope you guys enjoyed seeing us struggle through this entire project.
In the end, it took us two nights and we're still not even really done with the car, but
we'll worry about that off camera later down the road.
As always in this series, we're trying to keep it consistent with the giveaways, so
I hope you guys enjoyed those.
Once again, all the information for that is down in the description.
If you haven't already, subscribe to all three of our personal YouTube channels, Scrap
Life Dahl.
He's right there.
You've got to show him.
Right there, yep.
Scrap Life Fernando.
Go ahead and flip the camera around, Fernando.
Show them who we're working with.
Jesus.
And of course mine, Scrap Life Lee.
We post all kinds of stuff there that you won't see on this channel.
Inside looks, behind the scenes.
Fernando's completely in Spanish.
It's awesome.
I don't understand a word of it.
Now that all that's out of the way, I'm ready to go home, so I will see you guys later.
Send it away.
Porsches suck.
Do you have any last words, Fernando?
Adios.
I look at it.
We might have some good...
Jeez.
If you slap that roof, it's going to fall apart.
Can I look inside?
Dahl, you know you don't have to open the door to look inside.
Hold on.
Let me fake this like Dahl faked breaking that wood the other day.
My head's stuck.
Ah, got it.
These are really fancy Santa cups.
Hold on.
Dahl's supposed to have the f***ing adapter in there?
F*** this.
F*** it.
I don't know how to use this thing.
Do you want to...
Get out of here.
Shut up.
Get out of here.
Two out of three ain't bad, so I said three out of four ain't bad.
Given our demographic of old people, they're going to get pissed at that one.
F*** you, Dad.
I don't think I put it wrong.
You got to put it closer to the old one.
You're just copying Dune Squad.
Dahl, that's in my goddamn ear.
I feel so fat right now.
Now you know what I feel like all the time.
You look so sad from this profile.
Me?
Yeah, which one of us?
Both.
I was more of a Jason Bourne fan.
So you're a bitch?
No.
Hey!
Okay.
What the heck?
Okay, maybe.
He's like, this thing's going to be a monster.
It made 660 all-motor.
What happens when there's two of them?
Dose!
Get that camera out of my face, Fernando.
I'm not struggling.
I'm whooping this thing's ass now.
The good news is...
Did you hear that sound?
It sounded like Stone Cold was about to walk through the door.
What a pussy.
Did you hear that?
Metal all over the mic.
Jesus Christ.
Obviously, I hope you guys enjoyed this.
I hope you guys enjoyed seeing us struggle through this entire project.
But everything...
I think it was...
Struggle through this entire project, including this exit.
He's right.
