How we capped our well to comply with the law in Portugal - Timelapse #bluetti

Countryside Days
242 followers
Wells are very dangerous and effective traps if not fenced off or covered.
So if you are a property owner, anywhere in the world really, but this is for Portugal,
you must be aware of this.
It is the law here in Portugal and probably many other places around the world.
I am going to share with you a crazy statistic because anything more than
zero of people falling in the well is too many.
Between 2017 and 2022, over 70 people died after falling into a well,
and this ranges from children to the elderly from the north to the south of Portugal.
Today we are going to cover our well and for the purposes of this law,
any plate that completely obstructs the excavation
should offer resistance to an overload of 100 kilos per meter squared.
So if you have a well and you want to cap it,
then stick around because we show you the whole process from start to finish.
Hey guys, welcome to the channel.
This week's video is sponsored and powered by Bluetti.
So we have quite a few Bluetti power stations that we accumulated over the past few years,
thankfully.
But I think the one that gets abused and used the most is this one.
The AC180.
It's not that we don't use the others because most of them are always plugged in.
We have the AC200 with a fridge and freezer back there as our winter backup freezer.
We have the other 200 that's a backup to our main solar system.
But this one is the one that gets abused the most because it's the most portable.
It only weighs 16 kilos and it's only 35 centimeters by 25 by about 31 height.
So yeah, really portable and it's great.
I mean, for us where I need to fix something where we have no electricity,
it's fantastic because I can just walk down with it and I have power.
And it's got a really nice big display.
It tells you what you need to know.
It is a user-friendly design and equipped with a 1.7 inch LCD display with a larger font size,
making it easy for users, especially the elderly.
And my favorite thing about the AC180 is the power lifting mode.
So it normally puts out 1,800 watts, but with the power lifting mode,
which you can put on with your Blue Yeti app, you can turn it on from there.
It brings up the max to 2,700 watts, which pretty much can power everything.
I don't think I have a power tool that it can't power.
So that's really, really handy,
especially if I'm going down by the pigs with the big jackhammer that takes 2,100 watts.
At least I don't have to take a generator down
or figure out a way to have a bunch of extension cords all the way down there.
So the AC180 has 1,152 watt hours available and you can charge it in any of four ways.
Solar, AC, car or even a generator.
We obviously use solar.
It's also really fast charging for on-the-go adventures.
Now, if you love the outdoors like we do,
this is definitely a must have to pack in your car before you go
on that camping trip you've been planning for so long.
The AC180 supports up to 1,440 watt turbocharging,
enabling a quick zero to 80% state of charge in approximately 45 minutes.
That is crazy fast.
The power station comes with an impressive five-year warranty,
distinguishing it from many competitors in the market.
They are lithium-ion phosphate batteries like most of these generators are nowadays.
So yeah, definitely the Blue Yeti we use and abuse the most.
I think it would have been something awesome to have when,
before we had this land and we used to go camping,
you'd have to take a small generator.
This is like perfect for that kind of thing.
And the price is amazing as well.
At the moment, it's on at €650 down from €1000, so €350 off.
And for €650 for something this size,
and with the tech that it has, the fast charge and all that,
I think it's well worth it.
And it gets better.
If you use our discount code LUKEANDSARA, you get 5% off.
Alrighty, enough blabber.
I need to get on it because we are capping our well,
and we're trying to do this so it fits it all in one video.
So anyone wanting to do it, it's all there.
So there's a lot of work to be done.
And this guy is going to do a lot of the heavy lifting.
Well, he's not going to be lifting sacks of sand and stuff.
That's me.
But I need to make a window or a hatch window for the top of the well,
so we still have access to it.
And I have an old door and an old door frame.
So here's the frame.
So I'm going to try and convert that into a smaller window.
I want it made out of steel, not glass.
So it's about time I get on it.
OK, before Luke claims it for a while,
Blue Yeti is having a New Year giveaway.
And their slogan is charge into the new year with unstoppable energy.
I love that.
And for a chance to win one of Blue Yeti's special prizes,
all you have to do is leave a message on Blue Yeti Europe's Instagram or Facebook.
Sharing your New Year wishes and tag two friends to share their New Year wishes.
And 16 lucky winners can win a Blue Yeti New Year gift.
And I mentioned the prizes along with the link in the description below.
So go check it out.
Now let me get this back to Luke before he notices it's missing.
That's our door.
And I'm sure I'll use this part and the lock and that in other projects.
Go back in storage.
So my plan is to have this part attached to the top of the well
with a hole in it for the pipe for the pump,
which is where we get all our water from, obviously.
And then this will be on the hinge.
OK, here's all my parts for my hatch door.
Put most of the frame there.
The actual window.
The actual hatch door that will be on a hinge.
Right there.
I've got the handle.
I've got these go to the back.
This goes on to the door.
This goes on the back.
This goes on to the back.
This goes on to the door.
This goes up to the frame.
Just the carpeges.
Still need to grind it down, obviously.
And the end of the actual frame over here.
This is actually a seal from the old seal from my coffee machine.
I think I'll be able to use it as a grommet over here.
The pipe to go in so the metal doesn't cut the pipe.
All right, let's mark them up, sand them down
so we can weld everything together, hopefully.
I'm curious how the hinges are going to go.
Never done that before.
OK, grinding.
Finally, I'm going to cap my well.
I've been wanting to do this for a couple of months,
but I've had bad back and not feeling so good.
So today I'm feeling good and also I have help heading over here.
So if you have a well, an open well like this in Portugal,
the law is that you have to either put a very strong fence all the way around it
so no animals or people can accidentally fall into it
or have it completely capped, which is what we're doing today.
I think for each square meter has to be able to withstand 100 kilos.
So we're going to make it nice and strong.
First thing you want to do is to chip off the edges of these concrete beams.
They would have overflowed from the mould
and you need to knock it off just so the bricks, the cinder blocks fit nicely.
OK, now that those are ready, we can uncover the well and start putting them up.
OK, so we have half of the footings done.
So there's one, two, three, four, five, six.
So now we can do the six on the other side.
OK, we waited for it to get dark so we can use the laser.
Let me get rid of the torch so you can see it.
Oh, laser, pretty crap actually.
And we're just checking all of our footings.
So last night when it got dark, we got the laser out
and just made sure everything was at the right level
because with the spirit level, it's not great.
You know, you could have a fraction of a line and it would make all the difference.
So we used the laser and we did have to adjust some of them, take some off, put some on.
Now they're all perfect, but the ones we did last,
like late last night, haven't completely dried yet.
So we're going to wait to put the beams on and start putting all the blocks on.
And in the meantime, we're just going to build up the walls
because there's lots of wall to build up, especially on this end.
So I got the cement mixer down and we're going to build up the walls while this dries.
And hopefully at the end of the day, we'll be able to put them on.
And I'm here again, thankfully.
It's great to have help, I tell you.
Already, we've built up the side walls a little bit,
but I don't want to build and then it will be in the way of the columns.
So we're going to bring the columns up now.
We think the cement is near enough dry.
Okay.
And to you.
Okay.
I gotta go.
Okay, very good.
Awesome.
Looking good.
Now, so bricks wise, all I need...
Oh, let me stop looking like LL Cool J.
Just a bit of cushioning.
I just need maybe two there and two there.
But because these beams are two meters, I'll have to rest one side of the brick at the end
on another rock, which I still have to cement in.
I've decided...
Well, I say decided, but thanks to Dirk and all his research and his knowledge,
he told me I should pour the slab at five centimeters thick.
I gave him all the measurements of all the bricks and the beams,
the size of the rebar in the beams, and he said five is more than enough
and it can withstand 600 kilos, I think.
Yeah, something like that.
And if I had done it bigger, that's just adding weight onto the whole structure.
So that's good that I asked him,
because I was going to pour it between eight and ten centimeters,
which would have been double the amount of weight extra on it.
So that would reduce, obviously, its total load.
And so just make sure when you do, if you do do this,
to know how much it can actually take, what load it can actually take.
So what I'm going to do is put it all in
and then raise the outside, probably with stones just like this,
five centimeters above this plane.
So this would be my form for my concrete.
I'm going to use six mil rebar netting.
And Dirk told me that the minimum is five, so I should be OK.
Then I'm going to be making it with M20 strength concrete.
So I'll be using one part cement with one and a half parts of sand
and three parts of gravel of aggregate.
And also the aggregate shouldn't be bigger than 14 millimeters,
but I think mine might.
I don't know, I haven't measured it yet, but it looks a bit chunky.
We'll see.
But I think it will be fine.
50 watt panel from Blue Eddy.
These panels are surprisingly efficient for a portable one.
OK, two hundred, two fifty.
Very good.
Yeah, new turbine.
I'm going to leave this here out of the splash zone.
Alrighty, looking good.
Yesterday me and Henning finished all the stonework.
Late at night.
As for the frame here, as I said before, we're going to pour the concrete five centimeters deep.
And these bricks that I happen to have are five centimeters high.
So I thought I'll just cement these in this fashion as a doorway.
Then I think I'll just be able to screw the frame of the window onto this.
I'll pre-drill them and put a couple of plugs.
But that's my plan.
So right now I'm just going to cement these stones,
so then we can pour the concrete and bring it up to that level.
Alrighty, pretty much done.
I'm going to clean it up after we pour the concrete and do a little bit better arranging.
But I'm out of cement.
And this will do for today.
60 and a half.
And my window is 63 by 56.
The window is ready to pour for tomorrow.
All I need to do in the morning is put the stair down.
Hopefully I've got enough lying around.
Let's pour concrete tomorrow.
What are you doing, Luke?
What's happening here?
Recycling.
So we put these up initially to have some shade.
We had shade cloth on them years ago for any veggies we planted around underneath.
Till our fruit trees grew.
And this is the only citrus tree really that we planted that did well.
So I'm going to take this mesh to put on the well for the slab.
Nice.
This should do it.
Wow, they're massive.
Something more here too.
I was going to cut these steel bars for around the...
The beam saw?
My dad told me to do the concrete tracks on the corner,
but since I put the brick, maybe it's next.
Doesn't matter, you know, because there's the brick.
Yeah.
You like my doorway?
I love it.
Alrighty, yesterday we finished in the dark.
But it's looking good.
I'm really happy with it.
Let me show you.
It really was like filling a chocolate tart or something.
But not as tasty and a lot more work.
Right, I'm taking off some of the smaller stones so the water can just flow off.
When it does rain and not sit on the concrete.
There are little ones like these.
So then I'll break this off though.
Okay.
This side of the wall is so big now, so tall.
And I had built the bottom half when we first got to the land about six years ago,
because this was completely all dropped inside the well six years ago.
But as you can see, the bottom is still got all the moss on it.
So hopefully nature will take over and make it look prettier.
Putting on the window hatch as it is without the frame for now,
because my welder isn't working.
So I've ordered a new one.
So I'll do that in a few weeks, hopefully when it comes.
All righty, that's about it.
I hope you enjoyed this video.
And if you are looking on how to cap a well.
Hopefully this helps.
I hope you all have a happy new year.
And yeah, thanks for watching.
And thank you to Hemming for helping so much.
Thank you very much, Heading.
Bye guys.
Thank you Blue Yeti again for sponsoring this video.
And if you want your own Blue Yeti AC 180,
I put the link in the description below.
So go and check it out.
If you're looking to get rid of a noisy generator and replace it with a power station,
or you just really need a power station,
then this comes highly recommended.
We have been using Blue Yeti for the last three years now,
and it has changed our life.
And we couldn't ask for a better brand.
