The Insane Engineering of the F-35B

Fighter Jets
75 followers
I've never flown an aeroplane like this, where you can control the motion of the aeroplane
so precisely.
I'm not sure we've even scratched the surface yet of what this aeroplane, when it's operating
with other F-35s, is going to be able to do.
The F-35B is arguably the most advanced plane ever made.
A jack of all trades.
A stealth fighter plane, combining and improving on the capabilities of the F-16, AV-8B Harrier
and the B-2.
A highly manoeuvrable fighter plane, capable of attacking both airborne and ground based
targets.
A stealth fighter taking the lessons learned from Lockheed's previous ventures into stealth
with the F-22 Raptor and the F-117 Nighthawk.
A plane fitted with the most advanced sensors and computer systems, sharing information
almost instantly with allies, without compromising stealth, and presenting the information directly
on a heads up display on the pilot's helmet visor, giving unparalleled situational awareness,
allowing a flight of F-35s to effectively fight as a hive mind.
Perhaps most boldly of all, the F-35B is capable of transitioning from horizontal to vertical
flight with a push of a button, using directional thrust and a massive vertical turbofan engine
hidden within the plane's body, making it possible to land like a helicopter on the
relatively small amphibious assault ships of the US Marines.
This is the insane engineering of the F-35B.
Fitting all these capabilities into a single airframe is an extremely difficult task.
Designing for stealth demands careful moulding of the exterior of the plane, dictating the
design of crucial features, creating unavoidable trade-offs.
There are a lot of misconceptions about stealth.
The goal isn't to make the aircraft invisible, it will be detectable.
The goal is to delay enemy detection for as long as possible.
For bomber aircraft it shrinks the range of the enemy's radar stations, potentially
opening gaps in radar defences and allowing the aircraft to slip through undetected.
For fighter aircraft it provides a critical advantage, detect your enemy before they detect
you.
To gain these advantages we need to make it harder for the radar receiver to decipher
whether the return signal is just background noise or an enemy aircraft.
To do that we need to minimise the strength of the return signal.
There are several mechanisms for a radar wave to be reflected.
The most significant and most obvious way is through spectral return, otherwise known
as regular reflection, like a mirror, where the angle of reflection equals the angle of
incidence.
We want to avoid large flat surfaces that could reflect straight back to the radar receiver.
Corner reflectors where two surfaces are set at a 90 degree angle to each other need to
be avoided at all costs.
Tailplanes consisting of the vertical and horizontal stabiliser are the perfect surfaces
to create a corner reflector, allowing radar to bounce off both surfaces and return right
back in the direction it came.
The best way to avoid this is to remove the tail completely, like the B-2, but this impacts
manoeuvrability greatly.
Instead we can replace both the horizontal and vertical stabiliser with a V-tail, as
seen on the F-117 Nighthawk.
The V-tail can act as both a rudder and an elevator, and we can see how by examining
the resultant force generated when the control surfaces are actuated to different positions.
We can actuate them in opposite directions to generate a horizontal resultant force,
providing yaw control as a vertical rudder would, or we can deflect them in the same
direction to provide pitch control as a horizontal elevator would.
This configuration is sometimes used for unique looking aircraft like the Cirrus SF-50, allowing
it to mount a single tiny jet engine on top of the fuselage, with its exhaust directed
straight through the V-tail.
A private jet so tiny and lightweight that it can deploy a parachute to rescue itself
in emergencies.
Having rudder and elevator controls linked to a single mechanism like this is not ideal.
Fighter jets like the F-35 and F-22 need superior control authority, and that is a function
of control surface area.
The larger the elevator, the larger the pitch control.
If a control surface is working a double role, where rudder and elevator action is needed
at the same time, it reduces the control authority.
So both planes also feature large elevators, offset by a distance and angled to prevent
corner reflections.
We can see many more trade-offs in design by comparing the F-117 and the F-35 in the
quest to fulfill both stealth and fighter requirements.
Both the F-117 and B-2 have their engine air intakes mounted on the upper surface of the
plane, which prevents ground based radar from bouncing around inside the intake and back
to the receiver, and helps reduce infrared heat signatures.
However, for a plane expected to make high angle of attack manoeuvres in life and death
situations, this isn't a design you would want to include.
While performing a manoeuvre like this, the air intake will receive lower pressure air,
which will lower performance right when performance is needed most.
Air intakes located underneath the aircraft, like the F-16, will cause too much radar return,
so twin intakes located on either side of the fuselage are instead chosen.
These air intakes have some clever aerodynamic features too.
This seemingly innocuous bump plays an important role.
This is aeronautical engineering epitomised.
Every seemingly insignificant design feature has a purpose.
Mounting engine intakes along the body of an aircraft comes with some issues that pylon
mounted engines avoid.
As air travels along the length of the body, air begins to form a layer of slow moving
turbulent air called a boundary layer.
If this air is allowed to enter the engine, it not only lowers performance, but it can
also damage the engine.
As the turbine rotates, it will pass through the slow boundary air on one side, and then
fast stream free air on the other.
This means the force on the turbine blade changes for each and every rotation, causing
cyclical bending, a recipe for fatigue failure.
Planes like the F-16 feature a boundary layer diverter that separates the inlet from the
fuselage with a small gap, but this design increases radar cross section and increases
drag.
Later variants of the F-16 tested the DSI, the Divertless Supersonic Inlet, essentially
a large bump that creates a region of compression that pushes the boundary layer air away from
the inlet, while also scattering incoming radar and lowering drag.
The test flight demonstrated that it could meet performance requirements, ushering in
its introduction to the F-35.
The final product reduces weight by 30% and lowers production and maintenance costs.
Moving down the plane we can see other hints of stealth design.
Long sharp edges are the enemy of stealth.
Sharp edges causes radar waves to scatter in all directions.
Radar can even travel along the length of a surface in the form of a travelling wave
and then scatter upon reaching the trailing edge.
The strength of that return signal can be reduced with a few clever techniques.
The strength of the signal will depend on the length of the edge, so the first technique
is to reduce the edge length with serration.
You can see this technique implemented very clearly on the trailing edge of the B-2, however
it's less obvious where it's used for the F-35, until you start looking at all the
access hatches hidden around the aircraft.
Every single unavoidable surface gap on the aircraft has a serrated edge.
This hatch opens to reveal a telescoping ladder to allow pilots to climb in and out of the
aircraft.
These open to reveal the landing gear.
These are the internal weapons bay, essential for keeping the radar reflecting missiles
hidden from view, and these smaller hatches are flare dispenser doors.
Flares are effective decoys for heat-seeking missiles, but they do nothing to prevent radar-guided
missiles.
In the face of radar-guided missile proliferation and continued growing sophistication in the
technology, a new decoy system was developed.
This new technology is released from this panel.
When needed, this access door opens and a transmitter begins to reel out to a safe distance
behind the plane.
It has three levels of countermeasures to protect the F-35 from attack.
First, it actively jams missiles while they attempt to lock onto their target, by emitting
jamming signals which the onboard computer computes and delivers to the emitter through
the fibre optic towline.
If the radar manages to obtain a lock, it then begins to attempt to break the lock,
disrupting the tracking algorithms guiding the missile towards its target.
Finally, if all is lost and the missile is bearing down on the aircraft, the emitter
begins to simulate the aircraft's radar signature, drawing the missile towards it
as a decoy.
These serrated hatches hide critical components of the F-35, but more can be done to reduce
edge scattering in these locations.
You may notice that the colour around these edges is different to the rest of the plane.
This is because the edges are treated with a special radar scattering tape.
In the same way travelling waves scatter when they meet an edge discontinuity, they will
scatter when travelling over a change in conductivity.
The F-35 uses this to its advantage to scatter waves over in longer distance, reducing the
return signal by spreading it out.
The tape has a conductivity gradient, gradually decreasing its electrical conductivity, causing
radar waves to scatter at each interval.
Slowly decreasing the intensity of the surface wave before it reaches the edge where it would
have released one large return if the tape was not present.
The surface of the plane itself is also composed of a specialised radar absorbing material.
In 2010 Lockheed Martin filed this patent for a carbon nanotube infused composite material
that can absorb radar waves from 0.1 megahertz through to 60 gigahertz.
This is an incredibly wide range of frequencies, notably covering the frequencies Russian surface
to air missiles like the advanced S-400 system uses.
The effect travelling surface waves have on stealth design can be seen elsewhere.
You would imagine a cylinder would be a great way to scatter radar in all directions, lowering
the strength of the return signal, but if a radar wave comes in tangentially to a cylinder
and the wavelength is at least 1 tenth the cylinders circumference, the wave can actually
travel around the outside of the cylinder and travel straight back to the receiver.
This is likely why the F-35 features a sharp edge breaking up the circular nose cone.
Where the F-16 has a nearly perfect circular nose cone, the F-35 features a ridge.
The largest hatch on the plane is strangely not serrated, and this is for good reason.
This hatch hides the powerful lift fan within.
The airflow in and out of this lift fan needs careful consideration.
The lift fan is essentially a tiny helicopter, capable of generating 85 kilonewtons of vertical
thrust, and in doing so creates a low pressure zone above the plane, violently sucking air
into the aircraft at a 90 degree angle.
This air has to travel over the hood to reach the inlet, and thus the hood needs to allow
air to smoothly pass over it without creating too much turbulent flow, which would lower
the performance of the lift fan.
This is why the inlet door is not serrated, as the sharp edges would cause distortions
in the flow.
This hood alone went through several design iterations to optimise the airflow flowing
over it.
The demonstration X-35 aircraft had two doors opening towards the side of the aircraft,
but this was changed for the final aircraft in favour of a rear hinged door.
This helps funnel air into the engine and improves pressure recovery on short take-offs
where the F-35B does not take off vertically, instead using the lift fan and directional
thrust of the rear nozzle to take off on extremely short runways.
The way this aircraft transforms to perform vertical landing and short take-offs is astounding.
It's the closest thing to a transformer we have ever created.
When the time comes, a clutch linking the extended driveshaft of the F-35's engine
begins to transfer 29,000 horsepower to the bevel gear of the lift fan, spinning the counter-rotating
lift fan blades.
Simultaneously gears begin to rotate in the rear exhaust nozzle.
The mechanics of this nozzle are another wonder to behold.
Called the three bearing swivel nozzle, it is composed of three airtight segments cut
at angles relative to one another.
We can change the shape of the nozzle by rotating these angled pieces separately.
These three pieces rotate together to smoothly transition thrust downwards, but it's easier
to understand how it works by seeing what happens when we rotate segments individually.
Rotating the central piece can take the nozzle from 0 degrees down to 45 degrees.
This position is used for short take-offs, splitting the engines power between thrust
and lift.
This mode is as impressive as the vertical take-offs, allowing the plane to operate from
shorter amphibious assault ships like the USS Mackin Island.
A ship just 258 meters long.
It's minimum take-off distance decreases even further with the aid of a ski-jump, a
ramp that has been added to smaller amphibious assault ships.
Watching the F-35 take off over such short distances is incredible.
In this clip we can see the rear nozzle quickly adjusting it's angle of thrust in sync with
the rear elevators to adjust the pitch of the plane to ensure a safe take-off.
For a vertical landing, the final nozzle segment can rotate to provide the full 90 degree turn.
The first nozzle segment can rotate to move the nozzle from side to side, but here it's
needed to ensure the thrust doesn't move sideways as the nozzle transitions.
As we saw, when we rotate the segments individually they move in an arc that would cause the F-35
to spin out of control.
This mechanism also allows the F-35 to smoothly transition from cruise to vertical flight
and from vertical flight to cruise when needed.
There are additional control mechanisms to ensure this precarious balancing act does
not go wrong.
Bleed air from the main engine bypass is siphoned to two roll nozzles located on each wing,
providing thrust far away from the plane's centre of pressure to control roll.
There are also guide vanes located underneath the lift fan.
These can adjust the outlet area to adjust the performance of the lift fan, but can also
control the thrust of the lift fan from 5 degrees forward to 42 degrees backwards.
With computer assisted control of these control mechanisms, the F-35 is remarkably stable
compared to it's predecessor the AV-8B Harrier, allowing the single engine of the F-35 to
hover on two columns of air.
To do this, the F-35's engine, the F-135, developed from the F-119 engine of the F-22
Raptor had to be incredibly powerful.
The F-22 Raptor is a twin engine fighter, giving it plenty of excess power to pull off
incredible manoeuvres.
The F-35 only has one engine, and needs to squeeze out all the power it can get to perform
a vertical landing.
Where the F-22's engine can generate 156 kN of thrust, the F-35's can generate 191.
The F-35's engine has a much larger fan and bypass ducting, giving it twice the bypass
ratio of it's F-22 counterpart.
Providing the F-35 with a more efficient engine for cruise, but also a higher mass flow rate
for higher thrust.
However, this does come with some drawbacks.
Air that travels around the engine core completely avoids the combustion chamber, and thus misses
out on the acceleration generated there, reducing the exhaust velocity.
This reduces the top speed of the plane.
The max speed of the F-35 is 1.6 Mach, and while it's the first plane capable of vertical
flight and supersonic flight, the F-22 can fly at 2.2 Mach.
The F-35 was optimised for lighter time, not speed.
However, all that extra weight needed for vertical take-off seriously hampers that ideology.
The lift fan module weighs 1.2 tonnes, weight that does nothing in normal flight and requires
more fuel to carry, and to make matters worse, that space is used for internal fuel tanks
for it's variants.
Making the lift fan as light as possible was pertinent to making the F-35B viable in the
battlefield.
The fact it only weighs 1.2 tonnes is astounding.
It contains two counter-rotating titanium blisks.
Blisk meaning the blades and disc are all one single piece, instead of the traditional
alternative of creating a disc and attaching blades through dovetail connections.
This improves efficiency and eliminates a potential site of failure in the connection.
This is an astounding feat of manufacturing, and the first stage fan takes it even further.
The first stage blades are hollow to save weight.
Where the F-35B truly comes into it's own however, is in it's modern suite of sensors
and computers all feeding into this.
The heads up display incorporated into the pilot's helmet.
Traditional heads up displays, like those of the F-16, are incorporated into a panel
in the cockpit, a panel which the pilot can't see while scanning their environment.
Situational awareness is everything in the heat of combat, and this helmet does everything
it can to keep the pilot informed, even giving them x-ray vision and night vision.
Information from a suite of sensors around the plane feed into a central computer, where
it is processed and displayed through a projector inside the helmet.
Inside this transparent faceted box underneath the aircraft is a suite of sensors, but those
are not your typical windows.
These windows are made from a notoriously expensive gemstone, sapphire.
One of the few materials that is both hard and durable, but also transparent to a broad
range of electromagnetic wavelengths, from ultraviolet to infrared.
However, the radar antenna hidden inside the nose of the F-35 is the most important part
of this electronic system.
This is a scanned array radar that works very differently to traditional mechanical radar.
Phased array antennas have hundreds of tiny antennas.
We can see metal plates set in rows in the F-35 phase array antenna.
The metal plates have slots cut into them, and each and every one of these slots is an
antenna, 1600 in total.
This allows the phase array antenna to steer its radar using constructive and destructive
interference.
If two antenna release two radar waves at the exact same time, with their peaks and
troughs lined up, it will result in constructive interference, increasing the amplitude of
the radio wave.
However, if the radio waves are set 180 degrees out of phase, matching the peaks to troughs,
it will result in complete destructive interference, cancelling out the wave completely.
This is how noise cancelling earphones work.
They listen to the background noise, and then release a cancelling sound wave to create
silence.
Phased array antenna use this phenomenon to steer the radio waves, preventing the radar
from becoming a joint beacon, leading enemies straight to it.
Traditional phase array antennas are passive, meaning every antenna in the array is driven
by a single transmitter and receiver.
This would mean it can only point in one direction, and if it encountered two enemy planes flying
side by side and they split up, the passive phased array antenna would no longer be able
to track both of them.
However, the F-35's phase array antenna is an active phased array, meaning each and
every one of these antenna is an individually driven transmitter and receiver.
Meaning the F-35 can track multiple targets at once with zero moving parts.
The nose cones hiding these antenna need to be transparent to radar waves, and are usually
made from glass fibre composites as a result.
This transparency causes issues for the planes radar return signature, as an antenna like
this will reflect signals.
This was a much bigger issue for mechanical radar dishes that needed to point at the enemy
to keep track of them.
The phased array can point towards multiple targets while staying in a single position,
and this is why it is pointed skywards, to bounce incoming radar to space.
The phased array antenna also acts as the planes communication antenna, and this is
critical to the F-35's battle doctrine.
The F-35 excels in battle because of its networking abilities.
Relaying information between its squadron.
This is a huge amount of data to transfer between aircraft and allies on the surface,
and requires a high data transfer speed.
However, communication comes with one glaring problem.
It announces your presence to anyone listening.
It is vital that stealth planes can communicate with each other securely, and the active phased
array antenna facilitates this.
The F-35 uses the latest data link system, MADL, improving on the experiences learned
with the F-22, allowing the F-35 to quickly share data securely from individual F-35s
and ground based systems.
This information is then sorted by the computer and presented to the pilot in their heads
up display right in front of their eyes, giving them unparalleled situational awareness.
There is no need to communicate with their wingmates if there is an adversary underneath
them.
The planes communicate and feed that data right into the helmet, allowing the pilot
to look underneath the plane and see the location of the adversary themselves.
This is the true strength of the F-35B.
It is a networked hive mind stealth fighter, capable of taking off from a ship a fraction
of the size of an aircraft carrier, and returning while hovering in the sky like a helicopter.
It's one of the most remarkable pieces of military technology ever created.
The F-35 has borrowed many lessons learned from planes like the F-117 Nighthawk and B-2.
Planes that we have not made documentaries about yet, but our friends over at Mustard
have.
Their B-2 documentary is 20 minutes of beautifully crafted story filled with stylish 3D renders.
If you liked this video, you will definitely love these originals.
You can get access to them by signing up with the Real Engineering link in the description.
You can sign up directly to Nebula for just $4 a month or $40 a year, an incredibly good
price to help us build the best creator owned streaming platform in the world, or you can
use the incredible cost saving hack of signing up to the Nebula and CuriosityStream bundle
and get both streaming services for just $14.79 a year.
Getting access to all of CuriosityStream's award winning documentaries and Nebula's
amazing and ever growing catalogue.
Nebula is a game changing platform.
We gathered all of our favourite YouTube creators in one place to give us the power of a collective.
Funding our best ideas for documentaries like our Battle of Britain and Logistics of D-Day
series and Real Science's Becoming Human series.
We even funded Patrick Willems feature length film that I feature in, in a scene alongside
Darren Aronofsky.
That would not be possible on YouTube.
We also upload early and ad free on Nebula, giving you early access to Sam from Wendover
and I's antics on Jetlag The Game, along with exclusive behind the scenes videos like
The Layover Aftershow and our extended interview with David Kirtley from Helion.
We have many more documentary shoots planned for the year with fascinating companies and
we will be releasing behind the scenes footage for them all.
You get all this while helping us build a platform that unlocks our creativity from
the shackles of an algorithm driven platform.
Signing up with the link in the description is the best way to support this channel, while
getting some amazing entertainment and education in return.
