5 GREAT Gimbal Moves MADE EVEN BETTER!

Studio Solution
24 followers
#Education #filmmaker #teachnic filmmaker
In this video I'm going to share how to take five gimbal moves from basic to intermediate
all the way to advanced. I'm not just going to show you how to do these moves but also explain
why, what lenses or focal length I recommend and what your gimbal settings should be. For all these
shots I'm using the Zhiyun Reebill 3S and the Sony a7S III. Number one, the crane. A crane shot or
sometimes called a jib shot works great for establishing a location or your character in
that location. You can for example use it to show the audience where the next scene will take place.
The basic crane shot starts with holding the camera low to the ground and as the character
steps into the environment you pull the camera up while keeping it horizontal. I recommend shooting
this on a wider focal length to show off more of your environment, something like a 24 or 35
millimeter. Set the gimbal to lock mode to make sure that there is no tilt or pan movement while
the camera moves up. You can make this shot more interesting by starting your movement from behind
a foreground element. This will add more dynamic to your shot and puts more emphasis on the movement
of the camera. In this particular situation there was no foreground element directly behind the
character but I still wanted to have the shot end with the character and the path centered in the
frame. So I moved the camera from the right behind the bush towards the middle of the frame. This
horizontal movement combined with the vertical upwards movement makes this shot a lot more
exciting. Here I'm using a 35 millimeter and the gimbal is still set to lock mode. If you want to
take this type of crane reveal shot to the next level you can add even more movement to the shot.
By combining other movements with the crane reveal in one seamless move you can end up with a very
dynamic shot. Here I started with a side track with focus on the shoes while the character is
walking and at the right time as the character turns to the right I swing around towards the
left and slowly pull up the camera revealing the environment and more of the character. Starting at
the character shoes creates anticipation because your audience doesn't see anything else of the
environment or of the character. Then revealing both the environment and the character in one
steady move results in a very dynamic shot. For these types of moves I like to have the gimbal in
inverted mode instead of using underslung mode because it tends to give better results when the
gimbal is set to follow mode. Number two, the pullback. This shot is another way to reveal the
environment or your character in that environment and I think this can be a very powerful shot
so I'll show you four ways to spice up this type of camera movement and make it more dynamic. For
the basic pullback move you start with the camera close to your subject and slowly walk backwards.
This puts the focus on your character and then slowly shows the audience the environment they're
in. Here it also makes things more interesting by having the character turn around as the camera
pulls back. This then both reveals the character's face and more of the environment. I shot this on
a 35 millimeter lens but you can also shoot this on a wider focal length. Set the gimbal to lock
mode because you don't want any tilt or pan movement. We can make the shot more interesting
by starting the movement with an empty frame and then have the character step into frame as the
camera continues to move backwards. This works great to show off your location and then surprise
your audience by introducing the character as he walks into frame. This was again shot at 35
millimeter with a gimbal set to lock mode. Let's make this shot super dynamic and pull the camera
through something or past a foreground object. This will create a more dynamic movement and makes
for a very engaging shot especially because the camera is moving backwards. The audience doesn't
know what's coming and these little surprises keep the audience more entertained and intrigued
in what's going on. Again here seamlessly combining that pullback movement with a tracking movement
as the character walks into the location you end up with a very exciting looking shot.
Anything from a wider 16 or 24 millimeter to a 35 millimeter works best for this type of shot.
Have your gimbal set to follow mode so you can utilize both the pan and tilt motors to smoothly
follow your character. Another great reveal shot can be achieved by starting your shot with the
camera pointed up, ideally to a detail of your location. Then start walking backwards and slowly
move the camera down to reveal your character and the rest of the environment. This again creates
anticipation and intrigue in your shot because your audience doesn't really know what to expect
or what will happen. Having the gimbal set to follow mode allows you to do a smooth camera
tilt down and i prefer tilting like this instead of using the joystick and using the motors to
perform the tilt movement. This was shot at 35 millimeters but will also work at wider focal
lengths. You can do a similar shot by starting with the camera pointing down for example towards
something your character might be doing. Then move backwards and slowly tilt your camera up to reveal
more of your character and their environment. This can work great to include a detail of your
character or what they're doing and at the same time revealing more of your character
and the location they're in. All in one seamless shot. This is definitely one of my favorites as
it's a more unexpected camera move and it includes so much in one shot. I shot this at 35 millimeters
but you can also use a wider focal length if you want and for this type of shot you would also want
to have the gimbal set to follow mode. Moving on to number three the tracking shot. A tracking shot
lets you capture movement and action in your scene. It's great to showcase progression and also allows
your viewer to experience the scene from a dynamic perspective. This basic shot is what's called a
side track. You simply walk besides your character tracking them at eye level. You want to keep the
steady without any pan or tilt movement so make sure to set it to lock mode. This can again be
shot on a number of different focal lengths but I chose my trusty 35 millimeter. One important
compositional thing to keep in mind is to place your character in the left third of your frame
if they're walking towards the right. This helps the viewer to follow the direction of the character
across the frame left to right. One way to make this shot more interesting is by adding extra
movement. Start with the camera low to the ground and slowly bring the camera up to reveal the rest
of your character. Move at the same pace as your character and try to keep them at the same
position in your frame. Again starting with a detail and slowly revealing more of your character
creates tension and intrigue which is what keeps your audience engaged. Set your gimbal to lock
mode and similar to the basic shot you could use a variety of focal lengths for this type of shot.
Let's take this shot to another level by making it even more dynamic and if you've been paying
close attention you already know we can do this by adding and combining different movements. Start
the shot low to the ground with the focus on the character's shoes then while making a movement up
at the same time rotate around your character as you reveal more of the environment, the character
and the direction they're walking towards. This could also be a dynamic way to introduce a second
character in your scene. As you rotate around your main character and open up your shot you
could have a second character enter the frame from here. Having the gimbal in inverted mode and set
to follow mode works best for getting a smooth shot. It's definitely not easy to keep your
character framed well throughout the shot but with some trial and error you can do it.
Number four, the orbit. The purpose of this shot is to reveal the environment around your character
or to show the emotion of your character in their environment. It also works great as a hero shot.
For the basic orbit shot hold the camera at eye level towards your character then walk around
your character keeping them as much centered as possible. I like holding the weevil 3s with the
side handle for some extra stability and for all these orbit shots set your gimbal to pan follow
mode. This will activate the panning motor but keep the camera from tilting up or down. Let's
this shot a bit more epic by changing the angle of your camera. Hold the camera lower instead of
at eye level and shoot up towards the character. This will amplify the hero effect and it makes
your character seem bigger and more important. A critical thing to keep in mind is to make sure
that you have something interesting behind your character. I changed the position of my character
to make sure that these trees were behind him instead of just a plain boring gray sky.
In the previous shots we've already seen how the use of foreground elements can create a more
dynamic shot and the same goes for placing something in the foreground while doing an
orbit shot. Having something closer to the camera while moving will accentuate that motion of the
camera. The objects in the foreground will move faster than the objects in the background
creating the so-called parallax effect. This becomes even more apparent when shooting the
orbit shot on a longer focal length like here on an 85 millimeter. Moving further away from the
character thus allowing more objects between the camera and the character like these different
trees and shooting at a longer focal length just makes this shot look super cinematic.
Number five, the push-in or push forward. This move is used to bring you closer to something in
the frame. It can also stress the importance of a character, their emotions or what they're doing in
the scene. This shot usually tends to build drama and suspense. For a basic push-in shot you start
with the camera further away and at eye level of your character. Then you move forward towards the
character. This shot can work with a number of different focal lengths but I used a 35 millimeter.
No panning or tilting is needed so set the gimbal to lock mode. For a more dramatic push-in shot
hold the camera low to the ground and then push in towards your character. Then once you're close
enough move the camera up towards the character's face. Moving close to the ground like this will
make the movement more dramatic and give the illusion that you're moving much quicker than you
actually are. This type of shot works best with a wider lens so something like a 24 or 35 millimeter
and since this is more of a crane movement up I'm not using the tilt motor of the gimbal so I left
it in lock mode. A more smooth and cinematic way to do this type of push-in shot is by changing
the gimbal to follow mode. This will allow you to do a smooth tilt movement. Start by holding the
camera slightly lower and push forward towards your character. Then slowly tilt the camera up as
you get closer to your character. For a more dynamic shot you can have your character move
their head up as you're tilting the camera. Similar to what we've seen before changing the camera to
a lower angle and shooting up makes the character feel more epic and important. I also shot this at
50 frames per second and slowed down the footage for a more epic feel. This shot works best at a
longer focal length something like an 85 millimeter. Whichever gimbal move you end up using the absolute
most important thing to keep in mind is that it makes sense to the story you're trying to tell.
With that being said I want to make clear that the basic gimbal moves are not bad by any means.
They can have a time and a place in your film just like the intermediate and the advanced moves.
Anyway I hope you were able to learn something from this video and if you have any questions
feel free to leave them down in the comments. As always thanks a lot for watching and I'll
see you in the next one. Bye!
