What a start🤯 | spring & summer 2024 | New 2x Fendt 728 & machinery | Franzen Agriculture

Magical Machines
54 followers
It has been five months since our previous update about Franzen Agriculture,
a Dutch arable farm in the southwest of the Netherlands.
In this video, we show you new machinery that was used this spring.
Farmer Frank Franzen reflects on the difficult start of the growing season
and he gives an insight in the building progress.
We finish with the first harvest of the year, that of tulip bulbs.
We are very happy with the weather, because it is a dramatic spring.
Fortunately, the weather is dry again now.
The status of the business is that a large part of the area where we plant potatoes is ready in our case.
We still have to plant another 25 hectares and then we are ready.
The potatoes that are planted between the rows, sometimes with a lot of water on their heads,
have caused a lot of damage.
The difference between 20% and 30% waste is seen regularly.
Despite the fact that we are on top of it, with cultivating, equalizing, draining,
good drainage, scrubbing, at some point it is just too full.
In any case, it is growing well now.
It is now really the task to keep the phytophthora pressure under control.
At the moment, there are 45 hectares of sprouts next to it.
A large area, but that is a little less harmful, because it can also be pruned a little later.
But at least with two pruning combinations that we have this year, instead of one extra,
we are very happy with that.
The onions have all been sown quite well in time.
But we were also a bit surprised with some plots that just at a certain stage,
with so much rain on their necks, that a lot of plants have fallen away.
The parsley onions that are on it, they are there as a flower, perfect on it.
But the total position I find a 6.5, 7.
And then it really stops.
It is also because of the heavy rain that the tulips are much earlier than usual.
And the grasses, despite the fact that a tulip is always said to be good against water.
I think we still have to eat a very, very sour apple in the case of tulips.
There are still some problems with potatoes in this region.
We still have a large number of free potatoes that we are delivering,
which with this market still make a lot of money.
And we hadn't taken that into account either.
So below the line, I sometimes say, we are trying to predict it,
but it gets really difficult from time to time.
We go to the office, the knowledge center.
The office is intended to facilitate better.
There is also more and more administrative work.
And also mainly to offer target groups, schools, courses, interns a place.
In addition, it is also the intention that we can receive groups from other corners of the country or from abroad.
The building is still under construction.
And with that I hope that we will be in the right direction by December 1,
that we can keep the Christmas spirit here.
The extension of the office is the workplace.
So that we can do our maintenance from the winter and dry growth.
We are going to rebuild the old workshop back to potato storage.
So that we have extra potato storage and onion storage there.
In this room we will sort the sprouts ourselves.
Then they go to a greenhouse intermediary,
which they then neatly pack into the right flow pack to the retailer in Europe.
So that they go in mixed combinations to certain DCs.
And we hope that it is all ready in time.
It's always a bit exciting when you start building, then you know that it will fail.
The spout should never be on the ground again.
So when we have sprayed, it must go straight to the shed.
And then it has to stand there.
So when it rains, the water that comes out of the air goes over the spout and ends up in the surface water.
It is aimed at the future, let's stick to that.
It's all on that side, under shot.
So the wells will absorb the water.
And all the water that may still leak into the greenhouse,
or from the spout, or I don't know what, that can be collected.
And then we can put it in the freezer, or maybe later in a system that breaks down those substances.
But we will postpone that investment for the time being, because no one knows exactly how to do it yet.
But in any case, we hope that we can go on for another generation who will enjoy it.
This is the covered spraying area.
It's under one ear, we're going to spray the back of it.
If the machines that don't come with chemistry are in demand.
So the plow, a cultivator, a rotocopter, a tractor, it has to be sprayed there.
And the spray can only go there.
The sludge runs against the wall, the water goes that way, and then through the oil-fat separator.
And here, on the other half of the shed, we're going to cover it with tanks.
Two new Fendt 728s arrived on the farm at the start of this year,
delivered by the local Fendt dealer.
Fendt launched this 280 horsepower tractor in 2022.
They have a good power-to-weight ratio and can be used for a multitude of tasks.
We see one of the new tractors working during potato planting.
The DeWolf Serta 40 is another new machine.
Cut potato seed is used frequently this season because of a seed potato shortage.
With help from a hydraulic-driven elevator,
the hopper is quickly filled with 3.5 tonnes of seed.
The Serta is a combined hook-tine rotary cultivator and four-row planter,
creating 75 centimetre wide ridges.
The machine both plants the potatoes and makes the final ridges in the same pass.
Fertiliser can also be applied with the seed.
The 80 centimetre wide Michelin BF tyres are operated at the lowest possible pressure
to prevent soil compaction.
In front is a locally built Haygro seedbed cultivator.
On the heavier side of the field, the speed is lower.
But thanks to the one-pass system, it is still efficient.
The tractor is using Trimble RTK GPS and the planter is controlled via ISOBUS.
The other planting combination is working alongside the 728 today.
This will hopefully make for an interesting comparison
between a trailed and mounted potato planter.
The heavier parts of the field are worked with a 6-metre wide
AVR hook-tine rotary cultivator first to create some tilth.
Due to excessive rainfall and a lack of frost last winter,
the soil structure isn't great and a solution like this had to be used.
Frank will now tell us a bit more about how the growing season has progressed so far
and how the difficult spring of 2024 has hit the crops
and the weed and disease control in particular.
A nice bunch of sprouts.
We've harvested twice as much as we thought we would last year
with our weed control.
It's all going by itself.
A bit of pruning and then a bit of rain.
Then we'll do the rest with a weed tag.
No chemical weed control.
It's all going by train.
A bit of shoveling.
Then we'll harvest again and then it'll be perfect.
This year we didn't manage to do anything.
So we did shovel twice.
We just finished the last shoveling
so that they are firmly in the ground.
That's always important for us,
that the plant can grow well, firmly upright,
for a good harvest.
With that, they are relatively still really weed-free.
A few weeds that have opened up here.
It bothers us to make sure that you can't do without that chemistry.
You see the bomb of phytophthora explosion that is now.
Because of the much moisture and less and less means.
Then you get this type of excess.
So imagine the people who sowed very well on time.
They fly valiantly under the phytophthora.
And you have, for example, 30-40% again.
Then you might go to a potato price of one euro per kilo.
That doesn't have to be.
Because if we can keep our resources normally,
where we can use something in the right way at the right time,
then that gives a lot of potential revenue,
which indirectly benefits the price in the market.
And that is something that I think we as a sector know very well.
I think we can tell it too,
but that there is a certain big lobbyist
who structurally opposes it and does not yet see the consequences of it.
We are not allowed to re-mediate.
If it really has to be done, then we will just do it.
But then it will really cost everything for everyone.
And then I wonder,
if the average Dutch family now does 150 euros of groceries a week.
And that family, in five years, or maybe in two years,
will have lost 300 euros.
Yes, I think that will be a really big challenge.
To still be able to get those people the right food and other things.
So it's also a bit of a call to politics.
Pull the leash, come into the field,
and just listen to it.
Guys, this can't go on like this.
Yes, I think we should let this one hear that too.
As Frank just explained,
it is becoming increasingly difficult to use crop protection chemicals.
That is why this year,
this ecorobotic spot sprayer from Swiss manufacturer ARA has been purchased.
Savings of up to 95% in herbicides can be achieved in crops such as onions, seen here.
It's got 156 individually controlled nozzles,
spaced four centimetres apart,
to spray every individual plant.
Cameras spot the crop,
and all unwanted weeds and volunteer potatoes are sprayed.
So far, the machine has been used in onions and sugar beet,
but also carrots is possible.
Small batches of herbicide are mixed in the front tank,
which is mainly used to carry clean water.
Driver Martin can see which nozzle is spraying via the Android tablet,
that also shows the machine's accuracy and capacity.
The machine has a working width of six metres,
and with a forward speed of six kilometres per hour,
the capacity is impressive.
Early June, the tulip bulb harvest has started.
This is about 10 days earlier than usual.
We have showed you before how the bulbs have been harvested,
but this year the work is carried out by another company.
Local grower Malipat Flower Bulbs is seen harvesting here,
with two of their harvesters.
One is behind, a John Deere 8360RT,
that is also used for planting the bulbs.
On clay soil, tulips are generally grown between two layers of netting.
This means that a clean crop can be harvested without any soil.
Shares and a web, much like a potato harvester,
dig the nets and bulbs from the ground.
The harvester splits the two layers,
and on the headland, the different pieces have to be tied together first.
The new piece is joined with that of the previous bed.
This is rolled up and will be reused after cleaning.
The harvester splits the two layers,
removes the soil and extracts the clean bulbs.
Here you can see the roll of bottom net and the clean bulbs going into a trailer.
The operator can control all the harvester's functions.
These tulips are grown on 225 centimetre wide beds,
which is relatively uncommon.
180 centimetre or 72 inches is most often used.
Malipat is an early adopter of this system.
Notice how the rear discharge elevator can swivel 180 degrees
to allow unloading on both sides.
When the rolls of net are full,
they are unloaded on the headland and a new tube installed.
A New Holland T7-270 and further copes harvester was also working in the same field.
Various tractors and trailers can be seen carting the tulip bulbs away
and transporting them back to the farm where they'll be cleaned,
graded and dried immediately.
We have come to the end of our update about funds and agriculture.
We hope that you've enjoyed watching the Tulip Bulb Harvest,
Spring Action and Frank's Explanation.
Join us again later in the year when we'll be covering further harvesting action
and more exciting new machinery to come.
If you have any questions, do ask them in the comments section below.
Don't forget to like and subscribe and we'll see you next time.
Goodbye!
