Submarine Nuclear Power | Engineering behind it Nuclear Reactor How it Works

World of Submarine
10 followers
This is the Virginia-class nuclear-powered submarine.
To simplify it for animation purposes, we'll divide it into five sections.
Section 1, 2, 3, 4, and 5.
Section 1 contains one of the major parts like the summoner and the missile's tubes.
Section 2 consists of the sail.
All this communication equipment retracts when the submarine initiates the diving process
just as shown in the animations.
Just below it is the control room and torpedo room.
Section 3 is divided into three storied.
This is where the sailors sleep and eat.
And just behind it is the newly added Virginia payload module that holds 28 missiles.
Section 4 has the most important parts, the nuclear reactor along with the engine room.
And the last part that is section 5 consists of the turbines and gears
which connects with these propellers.
In this video, we're going to explain the complicated process of a nuclear reactor
in super basic animation.
Not to forget, we're also going to analyze how a submarine fires a missile
while still being submerged underwater and most importantly how a submarine descends
and ascends through the process of buoyancy all in the videos ahead,
so stay tuned and don't miss a beat.
This is the Virginia-class attack submarine developed in the 1990s,
but some analysts believe it was built to supplement the Sea Wolf fast attack submarine
due to the increasingly high price tag of around 3 billion dollars.
While the Virginia-class was commissioned at a cost of around 2.5 billion dollars.
But adjusted to inflation, the Sea Wolf would cost around 9 billion dollars,
while the Virginia-class might cost around 4 billion dollars.
Compared to the Russian Akula-class, it was commissioned at a cost of around 1.8 billion dollars.
All in all, 66 Virginia-class boats were planned to be built, but only 22 were completed.
There are different versions of Virginia-class submarines, but let's take this as a base.
The latest version commands a length of 460 feet or 140 meters,
which is almost the length of four basketball courts.
Interestingly, the beam is around 35 feet or 10 meters in height.
Let's compare this to a person to help us visualize how huge this underwater beast is.
Even better, to help us understand its volume,
we found out you can fit as many as 80 buses inside this submarine.
If all are stacked one on top of the other.
That's a lot of school bus parking area for a nuclear-powered submarine.
Comparing it with different submarines like this German U-boat built during World War II,
it looks a lot smaller.
This is the American nuclear Sea Wolf fast attack submarine.
Beside it is the Russian Akula-class nuclear-powered submarine.
And this last one is one of the biggest Russian Typhoon-class.
Also nuclear-powered, built during the Cold War era and still in service today.
It weighs around 10,200 tons, which is almost the weight of 41 Air Force One planes
used by the President of America.
That's a lot of weight on its shoulder.
Still, we should not underestimate its endurance,
as it can command a speed of 25 knots or 46 kilometers per hour and over.
And it can go to depths of 800 feet or 240 meters.
This submarine range is unlimited considering it is nuclear-powered.
This is the Conformal Large Aperture Sonar Array equipped with both
active and passive versions of sonars.
This is how it works.
Active sonar emits pulses of sound waves that travel through the water
and reflect off the target and return to the ship.
By knowing the speed of sound and water,
and the time for the sound wave to travel to the target and back,
the computers can then quickly calculate the distance between the submarine and the target
in a short amount of time.
But the Virginia class uses an advanced passive sonar that maps the ocean floors and minefields.
Additionally, the sonar array are also attached on each side,
along with the long boom array to provide quick target location and information.
Just behind the sonar section are the Virginia Payload Tube Outer Hatch.
Two of them can be found just besides each other.
Inside the tube are six Takumahawk missile.
Let's see how this works.
Step number one.
A submarine will ascend to an assigned depth.
Step number two.
When ready to launch, it will open of the hatch, and the protective seal will break open.
Step number three.
High pressure and compressed air is pumped into the tubes,
and this is used to eject the Tomahawk missiles.
Step number four.
The tip of the missile breaks the water's surface.
Step number five.
The rocket boosters fire and propel the missile into its path.
Boosters fall off as soon as the missile is out of the water.
Step number six.
The main engine of the Tomahawk missile will engage,
and then it will open its wings, just like the animation shown here.
Moving ahead is the sail, for size visualization purposes.
Let's compare this to the height of a sailor.
This is the surface navigation bridge,
where sailors or commanders stand on top for outside observation.
These are the two optronic masts,
a sensor on a submarine that functions similarly to a periscope,
without requiring a mechanical tube.
Moving ahead, this is the communication mast required to send and receive data.
At the back is the snort mast.
Snorkel is a device which allows a submarine to operate submerged
while still taking in air from above the surface.
This is the sub-HDR, high data rate satellite communication.
But just a reminder, this is no ordinary internet connection
and has a military-grade data encryption level for using the internet
because you do not want hackers knowing your submarine position
and reading your classified data.
But we as civilians can also achieve this level of encryption
by using private internet access.
Whenever you are browsing online on an unprotected device,
such as your phone, computer, tablet, or console,
your device is transmitting a great amount of information out into the open,
which can be viewed by various different entities
before reaching the intended website.
A virtual private network, or VPN for short,
hides your IP address and safeguards your internet connection
through an encrypted tunnel,
taking this guy as a reference as he is sailing from America to London.
His websites and services across the internet will change
and accessible depending on his physical location.
Here is my account.
As you can see, I'm in the UK version of Netflix.
To switch to a US server, I just use Private Internet Access VPN.
This is a London server and to switch to a different server,
I just have to scroll here and select US Streaming Optimized Server,
which is going to be used for streaming content specifically.
Then go to our web browser, refresh it, and boom, here we go.
Netflix US region.
But wait, that's not it.
You can now use one private internet access subscription
to protect an unlimited amount of devices at the same time
just for the price of one account.
for an 83% discount on private internet access.
That's $2.03 a month and get four extra months for free.
This is the control room and it is divided into various sections.
This is the ship control department.
Interestingly, the sonar section has the highest number of technicians
working on it as they are the eyes and ears beneath and above the ocean.
This is the photonics and navigation department is digitally linked to the sail
and it can also be described as the modern age periscope known as the photonics.
Here lies the radio room.
Just beside it is the special operation room
and the last section is the combat and control room
that fires the missiles as well as the torpedo.
This is how a torpedo works explained in very basic animation.
Step number one.
Pressurized air propels the torpedo toward its target.
Step number two.
A piston engine with propellers maximizes the torpedo's speed.
Step number three.
It trails a wire plugged into the weapons systems
aboard the sub using data to navigate.
Step number four.
The torpedo accelerates to 32 knots over 35 miles an hour
with a range of 8 miles or 12 kilometers.
Step number five.
As it nears its target the wire is cut and its sonar takes over navigation.
Step number six.
If a torpedo misses its target it can circle back
and starts hunting the target with its sonar.
This one torpedo has the explosive power of 1200 pounds of TNT
and I guess you do not want to be at the receiving end of this weapon
but reports suggest that new breed of barracuda torpedo or super cavitating
are going to be the latest upgrades.
This upper section is the sleeping area of the crew.
It has around 119 permanent berths.
Just below it is the kitchen or some call this the galley.
It also has a wardroom in simple words a dissection
where sailors eat lunch dinner or conduct mission meetings.
Moving to the back is the upgraded Virginia modules
which can hold around seven missiles.
That is around 28 missiles just with these four tubes
and now the most important part is why they call this a nuclear submarine.
Nuclear physics is a complicated subject
but we will try to explain the basic process
in super simplified animation as shown below.
A nuclear reactor consists of three crucial components.
One, fuel elements could be uranium-235 or uranium-238
and these rods vary in number according to the size of the reactor.
Two, moderator here can be water.
Three, these are the control rods
and the main function is to absorb any excess or spare neutron
in the moderator that is water.
Let's see how it works.
Uranium oxide is compressed into fuel.
Parts of uranium are packed into sealed fuel rods.
The fission of the uranium begins by bombarding it with neutrons.
In each fission two or three neutrons are released.
This in turn cause new fission and thus creating a chain reaction.
But in a nuclear reactor it's important
that this chain reaction is controlled after each fission.
Only one released neutron should cause new fission.
This is how it is controlled.
By lowering the control rods it absorbs the oversupply of neutrons.
Lowering all the control rods at the same time
and the result is it helps stop the chain reaction.
Now that we have mastered the basic understanding of a nuclear reactor
let's look at the step-by-step process.
Step number one.
The nuclear reactors heats the water to 320 degrees Celsius.
Step number two.
This pressure regulator is responsible
for preventing water from converting into steam.
Step number three.
High pressure passes through a steam generator.
This is where you want to convert water into high pressure steam.
Step number four.
The steam helps turns these huge turbines at a very high speed.
Step number five.
The spinning turbines are connected to these gears.
Step number six.
The gears and clutch then powers the electric motor.
Step number seven.
This in turn powers the propellers of this huge underwater beast
propelling at speeds of 25 knots or 46 kilometers per hour.
Step number eight.
The steam from the turbines is then passed through a motor condenser
which turns into water.
It is then pumped back into the steam generator
and the process is repeated
giving it almost an unlimited fuel for the submarine.
Now that you have understood the basic of a nuclear reactor
this is how it works in a Virginia-class nuclear submarine.
The heat for this nuclear reactor is used to generate steam.
This steam is then used to rotate a series of turbines
forcing the blades to turn at a high speed.
In a more simplified animation
these then drove the propellers
moving this 10,200 tons underwater beast
at a speed of 46 kilometers per hour or 28 miles per hour.
This is unlimited energy about 20 years without needing to refuel
and only limited by the sailors food supply.
Ballast tank technology is a complicated process
but we will present it to you in a super simplified animation.
In a submarine there are ballast tanks attached to both the front and back
and even in the middle.
Let's take a look at this submarine cross section.
The tanks have flood ports at the bottom and valves at the top.
In order for the submarine to submerge it opens the flood ports.
As soon as the back and front ballast tanks are filled
the submarine will then start to dive or descend
just as shown in the animations.
In order to move to the surface
air under pressure is pumped into it
to blow the water out of the ballast tank
just as shown in the animations.
The submarine will rise as a result of buoyancy
which we all know all liquids and gases in the presence of gravity
exert an upward force.
But that's not it.
The submarine also needs to steer.
It can turn left or right by using the rudders.
These are the elevators of the submarine
present at the back
and they also have a retractable dive planes located at the front.
They control the ship's angle
which means they can go up or down.
We make original 4k 3d animation from scratch
with a very small team working on it full time.
So please support us by subscribing
and checking out private internet access vpn
who sponsored our video.
Also consider exploring our recent video
the ocean gate titan and the f-16 fighter jet.
