Hey guys, Paul here. Welcome back to the channel.
It's been almost a year since Tesla released
Cybertruck for everybody and they have sold
a lot of cars. I believe some of you still waiting for your Cybertrucks to
arrive and some of you already driving an
awesome Cybertruck out there on the road. So in today's video I'll show you
all the awesome off-road accessories for your Tesla
like full roof racks set so you can put
long gated stuff on your roof like a long ladder or a wood planks that
is really long so you can carry those on your Cybertruck. Also really really
cool running board and so much more. So in
today's video I'll show you what comes in the box and then step by step
installation for all of the accessories and then we'll test it out and see how
they look on this awesome Tesla Cybertruck.
Now let's go!
All right before we install all these accessories
on the Cybertruck, I got all of them from Test Studio
or teststudio.com so if you are looking for Cybertruck accessories that have
so many more options for you here and if you are interested you can use
As you can see here all of the products that I'll be installing on the
Cybertruck today listed here and you will get a free
Cybertruck backpack and a cyber opener and a free Christmas
gift with a big discount as you can see with
the discount code from $2,900 down to $1,900
so you'll get a $1,000 discount with all of the accessories that I'll be
showing you today. Right now let's go and install it on
Tesla Cybertruck. All right now let's start the
installation with the heaviest one first which is
the running board so this is the brand new a Cybertruck
running board from Test Studio so these what came in the box so two running
boards left and right and they label underneath
right here you can see left and that one's right
so you have to look from the back of the truck
to the front to determine which one's left which one's right so
the left one should be the driver's side and the right one should be the passenger
side and it came with five brackets
each side so the bracket will go underneath the car
and then mount underneath the running board
and these are all the hardware that came in the box
all the screws and nuts in here and these are the brackets from the
other side so it should fly up about the length of what you see
right now we saw everything that came in the box let me show you a quick
installation on the running board so first we have to install
the brackets first as you can see I already pre-installed
the four of them and I left the fifth one so I can show you
so I kind of measure it we use all the same bolts with 13
millimeters as you can see and they came with this
two slot left and right so we measure it
it's better to use the one on the right so
the first one doesn't get too close to this part as you can see if it's
too close then it's gonna have to like turn a little bit now it keeps straight
so we use the one on the right and then we screw
the one on the right onto the hole right here as you can see it
right there so one only one screw underneath the car and then two
screws same same kind of screws to attach
the bracket to the running board itself
and before you put in screw make sure you put in a ring and the washer first
so first use your just hand screw it in then you can use the either torque wrench
or wrench or the tool that came in the package
now we can slot in the running board make sure all of the brackets are
lining up with all the screw holes on the board
let's see
and then just pre-screw it both I didn't tighten up
all the brackets yet so we can kind of move
you see the space up and down a little bit just tiny bit
all right now we are pretty much done with a running board
as you can see you can leave the gaps a little bit
I would leave a tiny gap so it doesn't scrub
this panel all the time when you drive or when you use it
so you can adjust the gap that's why I said do not tighten it up
yet so you can move in and out a little bit on the bracket
and also move be able to move left and right to aim
it on the screws here so we're done with the left and then this
driver side and then on the right too it's really
really cool love the design
it goes really real well with the you know overall design of the Cybertruck
watch the angle and with the fender down here come down
all the way here and with little Cybertruck logo in the
middle all right next let's install
the move racks all right so these what came in the box of the
four set set of four crossbar for Tesla Cybertruck so you have the
mounting point right here so eight of them
four on the left four on the right they are the same they're labeled
R and L for left and right R2 L2 there are six R2 and only two
R1 with which should be sitting on the top so R1 is on the top
and then the rest of R2 goes to the back of the truck so the bracket
came in with this metal cover make sure you unscrew this
first just use the allen key that came with
it a small one and then loose this and remove this before you be able to
screw these in to the one on the truck now let me show
you how to install all the brackets i already pre-installed
these let me show you the last one so the
Cybertruck has this cover which you can see
and then just push on the inside it will pop open
you'll see two studs and then we can insert the cushion
that came with it so it has the adhesive and so the thin sides go on the outside
i did not undo the other side because i don't want it to stick on the truck i
want to be a cushion so it doesn't scratch the truck and
then you can put the bracket on and put two
nuts on so there are two each on each one that
came in the package so just screw it on so it came with the
tools or you can use your own wrench or the power tools
just don't over tighten it so that's it you're done with the bracket
installation now before we put on the cover we have to
put the bar first so the bar will level one two three four
so the one is in the front the shortest one
and then two three four as you can see it have tapered in from the rear of the
truck to the front so the widest one would be in the back
of the truck so i pre-installed the three bars in the front
one two three um so i left the fourth one so i can show
you how to install the bar on the bracket
as you can see it's just put in the washer
and then two of the screws and use the key and key
to tighten it up and screw both of them in
last but not least just put the cover back on
so remember the first step we remove the cover and then
screw it in now we are done with the installation
so even with all these bars installed you still can
open and close the cover really really nice
let me show you the overall look of the bars
so now you can carry you know long longer stuff the back of your
Cybertruck and of course i believe they have options for a
even though instead of four you can just remove
the two in the back and then just use the two on the top or
you know keep i would probably keep the two on the top the whole time and just
remove two in the back and just install it back in when needed
so it doesn't block the way of your bed so you can put stuff
in and out easier before we install the side panel rag let me show you
how to pre-install some of the parts first
so there are three different pockets here
one in the front one at the end so we have to pre-install
these using the screws the small screws that
came with it you can see this one right true yeah
so two two smalls on the end two bigs in the middle
there and then two over here all right let's install
these first
all right so this is the last one we are done pre-installing
all the brackets now we have to install it on the truck but first before
you install it you have to put one of these into the
slot on the side of your Cybertruck and just put the rag up and then
aim to the right position and then just screw them in
that easy we are done with the installation
so i pre-installed the one on the right you can see now you can tie
on or strap on any of the gears on the side of your
inside of your Cybertruck bed which is really really cool
these are practically the same compared to the stock Cybertruck one
from Tesla over there let me show you so these are the
official Tesla one practically the same the same way to install it but you pay
probably half of the cost and this is how you
you know strap on all the gears on the rack and the next
off-road accessories for your Cybertruck are
these two so the set came with a bed liner
and a front trunk liner as you can see so the bed liner
already had pre-cut hole for the hooks in the back of your bed let's try to
fit in a truck but here's the fitment on the bed liner actually it's really
good and has some bubbles because brand new
out of the box test studio brand has pre-cut out holes
for you for those hooks as you can see let me
show you the hooks real quick these hooks right here those
four two three four so it has also has this um it's not quite
cut out but usually like a emboss so you can see
where the handle to open up the under storage on the bed
pretty cool all right now let's test out the front trunk liner
okay so here's the front trunk liner um it's bubbled
a little um might be because of the shape
which i think it needs time to sit in as you can see right here
so it's not quite perfectly fit like the bed liner you saw but
it still fits in but it doesn't sit in right here you see a little bit a little
i would say like a millimeter too big but it still you still can use it okay
so last but not least is the your bed
divider so it has this adjustable feet two of them left and right
and you can just open this
to release there you go release the side hooks the side locking hooks
on the side let me compare oem
this one real quick so this is the oem from
tesla as you can see the logo it doesn't have
adjustable feet as you can see the feet go through the groove
of the bed um grooves on the bottom so when you put the liner
it's um it sits too tight let me show you as you can see as i try
to put in the divider with the liner
you see it sits right here all the way to the like
the end of it but the locking part is too high to lock in you see that
so it has to be lower it's not adjustable with
the one from test studio it is adjustable
so this will go right in let me show you okay so with the
adjustable feet as you can see it could go as
low as you want and as high as you want you can see
it goes in right there now we can lock just pull it up to unlock now you can
adjust the whole divider to whichever position
you like pretty cool so you can use this
you know to block the space let's say you have a
spare tires or something or the storage boxes like those so you don't have them
don't want them to slide around and use the divider
to block it in place lock it in place so now we have everything installed
on this awesome cybertruck now let me show you
looks really awesome on this cybertruck my favorite are probably these
running boards i think i love the design it goes really really well
with the cybertruck and it's really useful in my opinion
the rest are really nice and i think it's a good
addition to your tesla cybertruck both you know everyday use and of course
off-road the running board could you know protect also protect
all the rocks from skipping up and then scratch the side of your
cybertruck too and the installations are really real
simple it might be time consuming because of the weight of it
so like the running boards are really heavy because of the
the material metals and also the roof racks too so you have a buddy
to help out with the installation would be a lot easier
thank you so much guys for watching today's video make sure to put
all the links of all these accessories for
tesla cybertruck in the description down below and special discount code for you
too and don't forget to click like if you
like the video don't forget to subscribe for more awesome
contents like this we'll see you on the next video peace