Native American Style Flute, Making the True Sound Hole

Native American Crafts
28 followers
4 Video Views·Dec 15, 2024
After prepping the inside of the flute and turning it on the lathe, the exterior of the true sound hole is finished.
Hello my friends, I'm going to show you how to make the true sound hole for the Native
American flute.
After we remove this from the lathe, we need to work this area down.
We need to make this flat, and the purpose of that is for your sounding piece to make
the airway.
We're going to continue that flat for the sound holes.
The way I do this is to take a flat plane, a little at a time, keep checking, making
sure that I have equal amount on each side of those holes.
Now I turn this around, use that flat part to steady the plane, and continue like that.
Taking a knife, I'm using an X-Acto, and what I'm going to do is square these holes up.
On this front one, this side is already cut from the inside.
Now I'm going to take the knife, and I'm going to run these cuts here, and these are my limit
cuts.
Once that's set, now we take the router, and you see I made a new base, and it's set for
1 32nd of an inch, that's the depth of this air passageway.
I'm starting the router in the back hole, turning it on.
The airway can also be cut with a chisel or a file.
Taking a block of wood, setting this over the airway, and test it.
Right here where the air is coming in, we want to make this a softer edge to eliminate
some of the turbulence of the air that comes in.
The smoother we make that, the crisper the sound will be.
Check the sound once again.
Sharper, much clearer, crisper.
Thanks for watching my friends, bye bye.
