Grab Dollar Tree Wood Slice For These Genius DIYS ๐ Under 5 Minute RUSTIC Decor

Homemade stationery and decor items
103 followers
In today's video I'll be sharing some beautiful rustic decor hacks
using Dollar Tree's wooden slices. So keep watching because you're not going to want
to miss out on these simple yet stunning DIY projects. Dollar Tree has a variety of natural
wood slices in different shapes and I love crafting with these. So for today's video
I did pick up a variation of them. I'll be using the circle one for this project.
I'm going to be turning it into an adorable rustic coaster. So first I'm going to paint
it with these neutral warm colors from Apple Barrel. Territorial Beige and Khaki,
but any color will work. I'm going to mix the two together and then add a little bit of water
to thin it out. I really don't want to go on too thick but more like a stain. To apply the color
I'm just going to use a piece of cloth and I just dip that in the paint and apply that on one side.
If the surface feels a little too raw or rough just give it a light sanding before painting
and that paint will go on nicely. So after I apply the paint color I also wipe it down
immediately so that you can see some of that wood grain underneath. I want to add some stenciling
on top and I'm going to use my Cricut to cut out the stencil on this Dollar Tree vinyl with a
sticky back. I'll be cutting out some trees and I just downloaded the image from Canva and I
uploaded it to Cricut Design Space. I thought the trees were perfect. It really adds to that
overall rustic look. Of course if you don't have a Cricut there are other options like a Dollar
Tree. They have a nice variety of beautiful stencils or rub-on transfers that would really
work nicely. Now before I apply the stencil I remove that jute hanger and pulling out the staples
it was not easy so I did have to use a heavy duty staples remover. So I placed that vinyl right in
the center. Now I should have centered the trees a bit leaving a vinyl cushion all around but
instead I cut it too close to the edge so I just added some tape on the side to protect the wood.
I'll be painting the trees black and I'm using Folk Art black chalk paint. Now before stenciling
always make sure to blot out any excess paint that's on the brush to prevent smudging. But you
know using a vinyl with a sticky back it definitely helped in preventing the paint from seeping
underneath. So I just pounced over the stencil and once it's fully covered I carefully remove
the stencil. Because of that somewhat fine details on the stencil I did have to slowly
peel it out little by little on all sides but it did come out nicely. And any areas that stuck I
just weeded it out. Now I'll be using this as a coaster but honestly you don't have to. I think
this is also really pretty just the way it is. But to turn this into a coaster you're going to
have to seal it to protect the surface from moisture and heat. I'll be using Minwax polycrylic
to seal and I'm going to be applying several layers just to make sure I have a good seal
but if you want to use something even more durable especially if you're making these as gifts
a polyurethane finish is a good choice. Now to protect the surface the coaster will be resting
on I'm going to apply some adhesive cork. This one's from Dollar Tree and I'm just cutting the
amount that I need making sure it doesn't extend beyond the edges of the wood.
And then I just stick that on the bottom. Now I really loved how this turned out so I wanted to
make another one. This time I did a little bird on a branch. I also centered the stencil before
cutting so that I had some cushion all around. I'm leaving the wood as is natural. So I just
apply the black paint over the stencil dabbing out the excess paint and applying it in thin layers.
This one turned out so beautiful. Once it dries completely I seal it and then I cut and stick that
cork adhesive on the bottom and this DIY is done. You can really be creative with these,
personalize them to your style, make a whole set with different designs for your home or as a gift
it really turned out beautifully. For the next DIY I'll be using these Dollar Tree rectangle
wood slice. These are about nine inches in length and I'm going to be making a beautiful rustic
riser. I'll be using this one inch square dowel. I get these at Home Depot and I'm going to trim
that so that I have two to just a little over three inches but another option that will still
work if you want to keep it simple you can use four tumbling tower blocks, glue two pieces together
and no cutting required. I'll also be using four of these wooden cubes from Dollar Tree. Now it's
important that they're all equal in height or else you'll have an uneven riser so I'm just sorting
out four that are equal. I'm going to remove that jute hanger. The staples are on there pretty
good so I had to use a very strong staple remover to pry it out. Next I'm going to attach the base
so I have the bottom facing up and I'm going to add some glue on one side of that cut square dowel
and I place that close to the edge. Not all the way, I do leave a little space about half an inch.
I glue the other end just making sure it's placed about the same distance from the end as the other
one. I'm using Titebond multi-surface glue but you can also use hot glue. I just like that extra
repositioning time. I'm going to glue the cubes on top of the square wood close to the ends.
This just gives it a little more height and it's a nice little detail to the base.
I give it about a minute or two to bond and then I flip it over and I put some weight on top
and I just let that dry completely. I'm going to stain the riser and I'll be using this water-based
stain in the shade special walnut. I wipe the color on and then I also wipe down the excess.
Now you can paint or stain this any color but I really love the rustic look of the stain.
I also make sure to paint the base. Now you don't have to but I also stain the bottom
and this rustic riser is done. For the next project I'm going to be making a very quick
and simple wreath and I'll be using this grapevine wreath. I get these at Michael's. They're really
not too pricey and I believe this is the 18 inch one. For flowers I headed to Dollar Tree as well
as Walmart and I chose more muted down colors for the wreath. I'm starting out with these two
greenery bouquets. I really like the shade of green on these and these are from Walmart. I'm
going to slightly bend them to go with the curve of the wreath and I'm going to position them
opposite each other. I'm just tucking it in. I'm not using hot glue only because I'm always reusing
the wreath for other projects and the grapevine wreath is so tightly dense so it holds pretty
well. Next up are these lavender bunch from Dollar Tree. These are so pretty and I position them right
on top of the greenery, tucking them into the wreath. I do make sure to leave a little space
in the center. I'll be placing three flowers in the center, two ivory and one peach. These are
also from Dollar Tree and these I do secure with a little hot glue. Next up I'll be using this
Dollar Tree rectangle wood slice as well as these poster stickers from Dollar Tree as well. I'll be
spelling out the words hello but before I peel and stick them I'm going to distress it a bit
and all I'm doing is just getting a little sanding sheet and lightly going over the letters.
That will scratch it up letting that white underneath show through and then you just want
to lightly wipe it down to remove any black dust. I started out with a middle letter L and I placed
that right in the center and then I just worked my way out, peeling the letters out and then
sticking them on the wood. The stickiness in the back isn't really strong so you're going to need
to seal it in place once you're done placing the letters. Next I'm going to secure it right in the
center of the wreath. I do remove that jute string hanger but you can leave that on and find a place
to hook it on the wreath directly as well. I just rest it on the wreath and then I put a little
hot glue to hold it in place and this simple wreath DIY is done and I love the way it turned out.
Now this next one is going to be a super easy one, no gluing or painting required.
Just grab several packs of these small round wood slices. These come in a pack of three and I got
about three packs but you can get more or less. You can stack several of them at varying heights
and place some small pillar candles. These are from Dollar Tree and they fit perfectly
or you can add some boated candle holders or place them in a row directly on a table or on a riser.
Place some candles on top for that beautiful rustic ambiance. So these are just a few ideas,
I'm sure there are many more ways to use these. Hey thank you so much for watching! I really hope
you enjoyed all these quick and simple DIYs. If you did like it make sure to give it a thumbs up
and subscribe for more budget-friendly DIYs. Until next time, bye!
