Getting Your Photos Ready For Print

BHG Photo Video (Zoom Plus!)
31 followers
As photographers there's really not much more rewarding than finally seeing your work in print,
getting it off the screen into a physical tangible work of art. Of course though there's a few steps
that need to be taken to get it off your camera onto the computer and then through the printing
lab to here in your hands or even better on the wall of someone who's supporting you and that
really is one of the highest honors. So in this video I want to share with you the steps that I
take to adjust my files so that when I get them back from the printing lab they look exactly like
what I see on the computer at home. All right let's have a look. Okay step one is opening up
the image that you want to print. This is an image that's been converted from a RAW file to a PSD,
a Photoshop document, so that's a high res uncompressed image. Typically I'll be saving
my RAWs either to the PSD or if you're a Lightroom user you may want to use a TIFF file.
Either is fine they're just high res uncompressed and it's a separate file now from the RAW. That's
just how I save all my imagery once it's been edited. So the next thing I'll do, I've opened up
that PSD file, is I want to resize this now to be whatever I'm printing at. So you could be printing
at 10 inches, you could be printing at 100 inches. So this one we're going to be printing at 45 inches
on the longest edge. It's going to be a 30 by 45. So the procedure now is going up the top
in Photoshop here to image and then down to image size and we're getting now the existing size of
the file. I like to work in inches when I'm printing, it's quite common. So if it's not on
inches you can just convert it right there. Like I said I want to do 45 inches long, so typically
you only really think about the longest edge. So I'm going to do 45 inches there and I've done
that on the width which was a mistake. The longest edge on this one is the height. So I'm going to
go 45 and now it's kept that 2 to 3 ratio. That's what I shoot at, a 2 to 3 ratio. That's the sensor
size on a full frame, a 2 to 3. So it's basically converted the width now to 30. So it's a 30 by 45.
So change the longest edge. The resolution I leave at 300. That's the pixels per inch PPI.
The only time I would ever change that is when things are going on the web. They would actually
decrease the PPI but in this case I leave it at 300 and that's all I change. So if you're going to
simplify it, change the longest edge to whatever your print size is. In this case 45 inches. We're
going to push OK and in this scenario we're upscaling. So you can see now that the file
has become much larger. I'm going to now hold down command and push zero just to go back to
the full screen. Now for the critical part of printing I want to show you what I do which is
short and simple and it works. I'm going to duplicate this layer first and foremost. So I'm
just working on a fresh layer to duplicate. I'm holding command and pushing J. We've got a second
layer there now which is just a duplicate of the first one. All we need to do really is make sure
that this file which is going off to the printer is not as dark as it currently is because if we
print this out now it's going to look way too dark and underexposed for the paper for the canvas etc
because we're viewing this on a backlit screen. There's a lot of fine details here especially
in these mids and shadows. Say these little portions of the trees for example they're just
going to get completely lost once we're printed. It's just too dark. It's fine for a screen and I
always process for the screen because that's where the images are going to be viewed predominantly
but now when it's time to print we need to broaden things up. So on this fresh layer
that's where I'm going to do the work and what I personally do is go back to Camera Raw. You can go
back to Lightroom if you're a Lightroom user. I'm going to go Filter, Camera Raw Filter and the image
is going to pop up in here in ACR, Adobe Camera Raw. Now all I need to do predominantly is think
of these dark tones. So we've got all these dark shadows and those dark and mid tones. That's the
main part that we want to get brighter. A great reference for you is your histogram. If you're not
familiar with the histogram just check out my channel, search my name, I'll break it down for
you in that. But the histogram is really going to give us a good reference on are we losing details
anyway. So I can see I'm not losing the shadow or the highlight details. I've got a bit of room to
move, that's great. The first thing I will do is open up the light panel and bring up the entire
exposure. This way I'm bringing up every tone. There's no harm in doing that but I'm keeping an
eye on those highlights. You can see they're just starting to clip now so I can't really bring things
up too much. If anything I could recover some of those highlights but I don't want to go too heavy
because I'll be pulling those highlights off some of these little dark areas down there. The main
part though is the shadows and blacks and this is where I do a pretty substantial lift knowing that
once it's printed it's going to drop back and look how it originally did. This point here, look
there's a bit of trial and error and honestly it just comes down to experience. I just generally
have a feel now for how much I need to lift them up and what the result's going to come out like.
This is where you'll probably want to do a few tests before you go printing too large.
But as an example an image like this I'd be bringing the shadows up. I'm not looking at the
slider now, I'm just looking at the actual file. Probably about there and then the blacks maybe about there.
So if we do a before and after on that, that's the original and that's how much I've lifted it.
I'm lifting it to the point where I wouldn't be happy having that as the final original edit for
everyone to view online. It's just a little bit too bright especially down here in this plane
that's closest to the viewer. That should really have deeper darker tones compared to behind it.
I've lifted that to a point now where I don't really like that result. It's almost
embarrassing to send that off to the lab sometimes. This is not too bad but you get the idea.
We're lifting up those details so we can really see them. So when we print it they're going to
drop down but then they'll still look fine. So if I push okay on that it's going to apply those
changes and you can see on that top layer the before and after. So that's fine but it'll be
way too dark once printed. That's getting a little bit brighter. Probably too bright for
our liking but we know that once it's printed on the medium it's generally going to be okay.
The next thing I do now is probably flatten the image. Right click flatten so it goes back to a
single layer. That will keep the file size small. Now after all that's been done the final check for
me is going in on a tight zoom. So command and I just push plus and what I'm doing is scanning
along looking for any dust spots or just anything that you may have overlooked
in the initial processing and it could be something like as I said a dust spot. Maybe it's
you know a blemish in the landscape that you just think oh it's going to be a little bit
distracting once it's printed larger. You'll be surprised what is seen in print versus what's
on the screen. You'll miss something on the screen and then the second you get that print
will be the very first thing that you notice. This image is looking fine. Definitely up in the skies
is where you'll want to look for those dust spots. That's where they're going to be most evident
but this one looks all okay. If it's larger than say 30 inches I'm going to save this as either
the PSD or a TIFF file. So it'd be file, save a copy and then something like this I might just
throw on the desktop for example. For now we'll just leave it on the portable hard drive that
it's on but we could call it you know test print. Normally I'd actually put the dimensions in there
so 30 by 45 put your name in there you know why not and like I said I'd leave this one as a PSD
or you could do a TIFF file. If it's smaller go JPEG. Definitely fine printing JPEG especially
if it's under 30 inches absolutely. So save it as the JPEG then we're going to push save. The next
file let's just have a look again. So we've got a forest scene here. This one is still the smart
object the original raw file so all I need to do on this one is double click it to get back to ACR.
First and foremost though would resize it image, image size it's pretty close but I want to be 30.
So 20 by 30 I'm going to push okay. It's going to downsize that slightly then we're going to jump
into ACR and make those tweaks. So we're going to open it up now double click this is why working
on smart objects is great because you can come in and you can see all the original editing right here
so like I said what do we have on the exposure we could go a little bit brighter up here
highlights I'm happy with that that's fine shadows would come up and the blacks just partially
about there again you know it just looks way too bright on the screen but we know that's fine.
Now I didn't make that layer that duplicate layer doesn't really matter right what I showed you on
that other one is just something to keep in mind otherwise if you've got that smart object you can
just go back and edit straight on top of that. So we've applied those adjustments and then same
process file save a copy and then save that wherever you want to save it. People often ask
about sharpening sharpening for print I don't do it what I've shown you here is what I do I use good
glass and I shoot to the best of my ability making sure that I'm sharp from front to back all the way
through the scene. If you're doing that then I definitely don't want to sharpen the file anymore
because it it looks I don't know I think it can look over the top when something's been
sharpened. I really like a painterly type look in my work if you start over sharpening then I feel
like it really starts to look like a photograph and if anything a cheap photograph. I don't think
we need to be sharpening up our files like you can see this straight as it is without sharpening
applied that's more than fine for me and you'll see hopefully in the canvas when we get this
made up it looks more than fine and keep in mind that people are viewing this from a certain
distance no one's zooming in and pixel peeping on the literal print or the canvas and if they are
that's just unrealistic because you don't view artwork like that you're going to look at it
from a distance while it's up on the wall. From there you're going to email the printing lab
that you're using or maybe you'll physically go around there and hand them the images on a on a
USB or something like that so I have different labs that I like to use depending on where the
print is getting shipped to I'll use labs which are going to help cut down the shipping costs so
different labs in different countries what I suggest is do a bit of research in your local area
and go and get some sample prints done have a chat with the people that run those businesses
and find the place that's the right fit for you specifically getting those test prints done you
might find that different labs are going to give you different results so now I would log in to the
labs website that I like to use or email them directly I email them those files those PSD files
along with the print and the medium that I want to print on we're going to print these out on canvas
send through the order and then I'll show you the results once these come through special delivery
what do we got
let's have a look hey good boy so I've ordered quite a few canvases we're going to open these
up now let's have a look at the result I really like printing on canvas because you can go so
large but it's nice and light it comes ready to hang and you don't have to worry about reflections
you know if this was printed on glass the price would be insane the weight would be ridiculous
shipping is a nightmare and there'll be a million reflections now the canvas quality has really come
a long way the past few years and you can even spruce up the canvas a little bit by getting it
in a floating frame as well but this is you can see here now the details in this those shadow
details it doesn't look overly bright it's just right there's just enough detail in those darks
just like what I had in the original file on the edit itself
here's our forest scene ended up going 16 by 24 as the final size for this one
and yeah definitely happy with that happy with all the results here that we've got
and certainly printed off quite a few and you can see here all those details
give you a close-up of that as I mentioned the main priority is the the tones making sure that
the colors and the tonality the darks the brights are true to what we're seeing on the monitor that's
the big thing and definitely happy with that they're not too bright they're not too dark
this big guy here had a lot of shadow details down in that foreground and that's just come through
more than fine just like on the monitor so obviously an important part of the process
when you can get your work in person is to sign it what I typically will use whether it's paper
or on the canvas is a sharpie I like to use the silver every now and then I might use black or
gold but generally I'm using the silver and typically going in the right-hand corner
every now and then though depending on the image I might have to go up in the left-hand side as well
the one tip with signing is to don't overthink it just go for it you're only doing something
that you've already done a thousand times in the past your signature so don't overthink it just go
for it and be proud of your work so here is some work printed on paper not the canvas
and these are mounted straight onto mat board ready to basically be popped into a frame or they
can sit on the shelf or at home just like that it's just another way that you can display your
work all right guys hopefully that's made sense and you're able to start trying out some prints
for yourself very soon one key consideration is having a calibrated monitor calibrated screen
that was one of the problems I had many years ago when I did those first prints when I was
horrified was that the pc I was using just had a really average screen I didn't know anything
about calibration so what I was looking at on the monitor was just vastly different to how it looked
on any other device especially when it came out in print I've always used mac since that point
that was kind of my learning curve there and I found with mac straight out of the box the colors
are pretty much good to go and the labs that I use for my printing they match exactly what I'm
getting on the max without even needing to calibrate and I'm not saying mac is the be-all
and end-all obviously there's many different systems you can use I've even got the asus 4k
monitor there which is set up pretty similar to my mac as well so just do your homework and make
sure that you are using a reputable screen or monitor and that it is calibrated like I said
some really good ones even this asus 4k one that I've got here that is calibrated straight out of
box as well so if you have any questions at all which I'm sure you may please fire them through
and I'll get back to you in the comments otherwise please check out the rest of the channel
I appreciate your support and I'll hopefully see you in the next video cheers
