Which 2 Piece Shooter Belt Do I Get?
2 Video Views·Dec 12, 2024
If there's one thing that we can all agree on, it's that kit is extremely cool.
Full loadouts are very rad and there's one piece of equipment inside of all these loadouts that
people are building nowadays after they've bought their first AR-15 or maybe they're
on to their fourth or something a little more specialized and they start to get into equipment.
They start getting a chest rig, a plate carrier, they start to look at a shooting belt of some
sort. They want to get into night vision and a lot of people, and this has gained a lot more
popularity over the last 10 years, even 20, but really the last 10 years, a lot of people are
starting with a shooting belt even before getting a plate carrier or a chest rig. Now I personally
think people should probably start with a chest rig. It's a little bit more useful with a rifle
in some ways than a shooting belt, but having a belt with a holster, a couple magazine carriers
does allow for very efficient training on the range and you're not having to worry about a
added variables of something like a chest rig. Now over the last 10 years specifically, there have
been a lot of advancements in belts in general, whether it is a over the pants war belt style,
which we saw being used in the early 2000s, or the new, a more modern, getting a little bit more
popular two-piece belt style, sort of a competition style belt that USPSA shooters have been using
that has been made a little more tactical with MOLLE, Multicam, and stuff like that.
What we're going to do in this video is we're going to be talking about some of the manufacturing
and types of belts out there. What we are not talking about is what to put on a belt and why.
You know, mission dependent, you know, kit, gear, how much weight to put on it, how many magazines,
we're not talking about that in this particular video. There are the people out there who have,
Grand Thumb has done some videos, so I recommend you watch his. This is a video to just go over
some of the construction and different principles going on with different belts on the market,
and then talking about a new belt that's now on the market that has some of its own features that
you guys might find valuable. So to start off, let's talk about the three types of belts on
the market right now. You have the standard inside the pants belt loops belt. This is anything from
a leather belt, nylon belt, tactical belt with a cobra buckle, obviously those are very popular.
This is going to be worn through your pants belt loops, and you're going to put your
belt worn holsters, like the new iron side from us, or another, you know, pancake style holster,
or like your safari land or something like that, on top of this belt that you have woven through
your pants belt loops. Now I have seen people, and I do not recommend this, take a belt like this,
this is our Nova belt, put all their crap on it, and then literally put it on on top of their shirt.
I do not recommend that. That's not very stable, your stuff's not going to be consistent,
it's laziness, it's not understanding the equipment, don't do that. If you want to run
like a dedicated pancake holster, or you just want a good EDC belt, this is a great option,
but if you actually want to build out a shooting belt, a pistol belt, for efficiency on the range,
and having a little bit more equipment, something you can put on more easily, don't use a belt like
this. That's where the over the pants belts, such as our Orion belt, as an example, come in handy.
You can actually suspend a lot of different pouches on it, and literally this whole thing
can get worn on top of whatever it is you're wearing. It could be winter clothing, it could
be big jackets, it could just be a flannel shirt like this. I'm going to adjust the tightness of
this belt, and now I have my magazine carriers, my medical, my dump pouches, my whatever else,
my holster, pistol, dual pistols, whatever it happens to be. These are very popular,
they're still being used, but a lot of folks are moving over to two-piece belts, and I'll explain
why. Another nice little option on the market, this is the Crye MRB. This is actually quite
cost effective, believe it or not, even though it has the Crye name to it. Again, it's a very
simple over the pants belt, typically speaking, but it actually does have the functionality of
being a two-piece belt as well. But I have seen plenty of people take this belt just like this,
and they literally wear it on top of whatever it is that they happen to be wearing at the time.
So the over the pants style of belt, or war belt, or whatever you want to call it,
does have a lot of benefits when it comes to just efficiency, but it does lack in stability. Even if
you have a belt like the Orion, or some of the other ones that have a non-slip pad, if you don't
have the belt really tight to your body, and you're running around and moving around, the belt can
sometimes shift up and actually move around. But they can suspend weight, typically a little bit
better than the two-piece belts, and a lot of them support suspenders if you want to go full-on,
you know, big Alice butt pack, and like four rifle mags on each side, and start to get into, you know,
an old-school like jungle setup, something like that. But this brings me to what has become
increasingly more popular over the last 10 years, and that is the two-piece belt. Now right here, I
have most of the the big name two-piece belts out there. I've used all of these. We've had them here
in the armory for years, for a lot of reasons, you all will see why. And they all have some of their
own nuances, and some of these are newer than others, and some of them have been around for a
little while. But basically the way these belts work is you have, let's see which one do I want
to use for an example, I'll use this one. This one's pretty old, or it's old-ish. You have an
inner belt, in this case a Velcro loop belt, so it's loop on the outside, typically speaking,
on another belt we have here though it's flipped. And you're going to weave this through your pants
belt loops, through your cry pants, through your BDUs, through your whatever, and that belt may just
stay on those pants, and you go put on your jeans when you're done, or whatever. But this belt is the
base for the outer layer that you are going to Velcro on top, which in this case, this is the
Ronin belt. It's been around for quite a while. It's a 175 inch belt with MOLLE loops, a Cobra buckle
in the center, and that's going to Velcro right on top. Now two-piece belts are typically in the
range of $150 to $200, something like that, especially if they're made in America. Yes,
there's foreign ones that are like 70 bucks or whatever, but a belt like this is typically around
$200. But it should come in lots of different patterns and give you, you know, some little
things like a D-ring for attaching other things, and a Cobra buckle, which is really strong.
It can support the weight of like a Walmart person, so that's pretty cool. But the main
differences with two-piece belts typically is how fat and how thick and the materials people
are using to actually manufacture the belt itself. As you can see with the belts all here,
they all end up being about 175, 1.75 inches wide, and the reason they don't really go into
two inches and a little bit fatter than that is they aren't going to work with a lot of the holster
attachments out there, and when you start getting a belt that fat, it actually starts to cut into
your gut, depending on how much gut you have. So from a comfort perspective, that's why a lot of
these belts stay in that 1.75 sort of a range. So we have the AWS, it's a 175. We have the Ferro,
same thing. The Chalk Belt, this Eagle Belt, they're all in that range of about 1.75 inches
wide. But the width of them does differ based on, you know, the materials they're using inside,
and that can cause some issues when you're mounting certain pouches. But let's go over a
couple of these just real fast. I just want to give a couple opinions because some of these
opinions are going to shape another belt that we're going to talk about here in a little bit.
This is the Eagle Belt right here. Again, it's very simple. It's a two-piece belt with
MOLLE loops. The downside with a lot of these MOLLE loop belts on the two-piece belts is
it's not really traditional MOLLE spacing. You can't always weave MOLLE into the gap in between,
and since this is only 1.75 inches anyway, you can't really get a lot of the benefit out of
actually MOLLEing a pouch to the belt. You just get a lot of flop in the pouch already.
So some of the MOLLE on some of these belts really doesn't work very well, especially on some of the
lasered ones. So it's kind of a moot point. You can kind of attach the MOLLE pouch, but it's not
actually fully MOLLEd to the belt. This Eagle Belt is interesting because they actually flip the
Velcro on the inside and the hook onto the inner belt. Kind of weird. They're like the only belt
company that has flipped it the other way around. I would never do this, and I don't think it's a
great idea because then you're walking around with the belt with Velcro on the outside and
in your pants, and it's just super annoying. The Blue Force Gear Chalk Belt is one that came out
recently, and this is pretty cool. It is a contoured belt. It's pre-contoured. The reason
this is kind of nice is it fits around your waist a little bit more comfortably when you have it on.
The downside to pre-contoured belts that I've had issues with, and maybe that's just my body type,
but I've talked to other people who've had this as well, is because it's pre-contoured,
it actually rolls the equipment into your body. So when you're actually wearing this,
and you have a mag carrier, that magazine, you don't actually, I can already see it right here,
it's looking down. The mag is actually angled into my body, which makes it a little bit harder to
grab than actually sitting straight out, making it more accessible. So more comfortable, but not
necessarily making the equipment more accessible. They also have some big loops here on the exterior
for like clipping monkey tails and stuff into, but that can start to get in the way of holsters.
There's just some interesting stuff going on here. We'll talk about inner belts here in a second
though. This is the Ferro Bison belt. This is one that's pretty popular. There's a few things about
it that I am not a huge fan of personally. The first is the Tigris is exposed. It does have
different IR reflective properties. It doesn't shine IR back at you, but it does appear high
contrast black under night vision. Now, is this much high reflectivity IR going to make a huge
difference on just your waist that's also covered up with pouches? Maybe, maybe not.
Some people just want to expose the Tigris because it looks cool. It's carbon fiber material,
and yeah, it does look pretty cool. But again, what is the goal? Is the goal to have good IR
reducing properties of the product or is it more to look cool? That's really for you guys to decide
based on what your priorities are. Again, there's some inner belt stuff. We'll get to that in a
on the front. Again, you can't really weave MOLLE in and out of it very well,
but it is a very slick MOLLE face, which means that it's really easy to attach things like
Tek-Loks and other things on the exterior. I have had some MOLLE belts where a Tek-Lok won't even
fit because the MOLLE is sewn. It's folded over and then the belt itself has a bunch of stiffeners
inside and I can't even get the Tek-Lok around the thing because it's so fat. I'm not a big fan of
that, but this belt is actually pretty awesome. This is the Crye and this is kind of one of those
weird two-piece belts. It's not really a two-piece belt and it's kind of a weird hybrid. This is the
Crye range belt. It's extremely expensive for what it is. You can wear it through Crye pant
loops is kind of a thing that they've said. It is pre-contoured. It's a thing Crye likes to do.
The inside only has a tiny amount of hook material to actually adhere to a loop inner belt. I've
worn this with a couple mags and a holster and that's about how much I would wear off of this.
I'm not going to wear a bunch of weight and other pouches off of it. It's comfy. It's kind of cool.
Nice construction. Looks fancy, but not super practical in my opinion. It's like $150 or
something crazy. The Ronin belt, obviously we talked about that earlier. Again, pretty standard
construction for a tactical two-piece belt. Two rows of MOLLE. Very stiff inner belt.
This is a good example of a typically what companies call a shooter belt. It's one of
these two-piece tactical belts, but it is specifically just for usually shooting
accessories. Just mag carriers and a holster. It's not made with any MOLLE. It's not made to
accommodate MOLLE pouches. It's just made for pistol carriers like with Tek-Lox or your holster
on something like a UBL. The nice thing with these belts is they're generally pretty inexpensive
because they don't have a lot of additional construction. It's just webbing material,
possibly a stiffener inside and the loop velcro field on the back and you're done.
The cargo buckle though will add about $30 to the overall cost. So if this was subbed out for
something else, even the Raptor buckle would bring the price down a little bit more. But
these belts are really nice if you are just running a couple of mag carriers. Holster,
you just want to start training. These little shooter belts, Estac has them. This is the AWS.
Can be really cost effective and really squared away. But let's talk about inner belts because we
can talk the outer belt all day, but the inner belt is actually where some of these, in my opinion,
these outer belts make it or break it. And you kind of have a couple of different flavors out
there. You have something like the Ferro inner belt, which is very comfortable. In my opinion,
it is pretty flimsy. And the issue that I've had with flimsy inner belts is when you actually load
down a belt with a lot of weight, whether it's the Bison or another one, it could start to
collapse and actually peel away from the belt because there isn't a lot of rigidity here being
added to the outer belt itself. So you have something like this that's pretty flimsy
or comfortable, however you want to say it. Something like the chalk belt here,
which is interesting. It's got this like squadron on the inside, the higher tech loop field,
which doesn't actually stick as well as the traditional style, the style right here.
Again, it's kind of flimsy. It's not super sturdy for this belt in particular. And then you have
the Ronin style, AWS style cardboard. Now this is the stiffest inner belt that I found at least,
and sticky belts onto this is great when it comes to weight and having a bunch of equipment on the
outer belt. The downside is, is it's pretty uncomfortable because you have this really
hard edge on the top and bottom from this material being so stiff that it can kind of
be uncomfortable whether you have the outer belt on or off compared to something like the Faro
belt. And neither of these are wrong. They're not bad options. They are just different in their
construction. Faro made this belt the reason that they did for very specific reasons. And
AWS slash Ronin made this belt very specifically for what they wanted. So if it isn't obvious
already, we like to use a lot of gear from a lot of different companies in the industry. And we do
this for years with no plan necessarily in making our own product or own version. We typically do
that when we actually come up with ideas that can make the product different or in our opinion,
possibly better. So in the process of using all these two-piece belts out there, using over belt,
you know, war belt style over belts, which is why we came out with the Orion because I had used
other over belts previously that I thought could be improved upon, hence why the Orion occurred.
And we've been using all these other belts and a few others out there as well. And that has led us
to a few things we'd like to do differently for a belt that T-Rex Arms is making. This is the T-Rex
Arms Speed Belt. This is our take on the popular two-piece style belt that we just went over and
showed a lot of different versions. And there's a lot of different features that we built into
this belt, like I said before, that come from using lots of different belts on the market and
not seeing some of these features used in those belts or just combining different ones into a
single product. So if it's something, you know, if all these different features are something that
you're looking for, there's an option out there. So let's go ahead and talk through it. Every single
Speed Belt, when you buy the outer, will come with the inner belt. And the inner belt, we talked
about it, you know, some of the different comparisons out there. If you have really light belts, you have
really sturdy cardboard-esque belts for holding up weight of the belt. We went a route that's sort
of in the middle. We wanted a belt that was comfortable enough to wear all day if it's
something you decide to do. This is the belt that I actually wear as my EDC belt now. I've been
wearing this for over close to two years now, actually. And there's a couple things that we did.
So we do have a stiffener material on the inside that gives this some rigidity when it
comes to actually putting the outer belt on top. We have this non-slip hank material on the inside
so the belt will not spin once you have, whether this belt, you know, you have this belt on without
the outer belt or you put the outer belt on, that helps prevent any of that movement along your
waist through your belt loops by having that non-slip hank material on the inside. We have
the standard Velcro on the outside. We tried some of the sort of new versions of Velcro out there,
and it just didn't adhere as well. So we just have the tried and true traditional fuzzy Velcro.
For the center, we don't have a G-hook. We don't have a metal buckle. Instead, we have a plastic
tri-glide. It can support a good amount of weight, but it's also streamlined enough that once you put
the actual belt on top with the rafter buckle, you're not causing, you know, a whole lot of
issues, discomfort, you know, things like that. I've had some inner belts where, you know, I had
like a Cobra buckle on the inner and I had one on the outer, and that's just stacking a whole lot
of layers of metal and just unnecessary material, and it can be kind of uncomfortable. So really
slick, really low profile. For the inner belt, sort of that nice in the middle for comfort,
but also rigidity for holding up the weight. When I'm wearing a sidecar, so in this case,
I have my carry gun right here, my sidecar. All I do is I have the tri-glide here in the center,
and I literally just throw one buckle on one side, one buckle on the next. And when it comes
to actually resizing the inner belt, it's super fast. It's very easy because we are utilizing a
tri-glide. All I have to do is take the tail and loosen. All I have to do, it's easier when you
don't have a sidecar on, but I can pull on this side to loosen, or all I have to do is pull it
nice and tight, Velcro it back onto itself, and I'm good to go. Super simple, really easy to use.
I do recommend if you plan on using this as a dedicated EDC buckle or belt, you actually route
the tail end through both sides of the tri-glide. So we have this, instead of just going over one
side and back, kind of like how you do cat tourniquets nowadays, we're actually going to go
through the inside side and back through. And what this does is this just gives it a little bit more
security, so it doesn't come unloosened on you if you start rolling around or doing something.
So it does make addressing or loosening the belt a little bit harder, but it definitely adds just a
little bit more security to the belt itself. So that's the inner belt. Let's talk about the outer
belt. So we have a very simple design, pretty much. It's a 1.75, so one and three quarter,
same as like everything else out there. It really is that nice middle ground. We experimented with
1.5 inch with prototypes of those, and they just didn't hold up with the weight. They felt kind of
uncomfortable and kind of weird. 1.75 really is that, in our opinion, that sort of perfect size
for compatibility with different mag pouches on the market, utilizing MOLLE the little bit that
you can. It really is the width you want to go with. We have a stiffened material on the inside,
a Tigris-like material, but on this particular belt, it's not exposed. And the way we did that
is we have a Cordura sleeve, so all the great properties of Cordura, IR reducing and all that
other good stuff, abrasion, and that is the body of the belt itself. It's covering everything on
the inside. Now, because of that, this is not a weight rated belt. We did a lot of research on
what it takes to actually get a belt weight rated. There's a lot of misconceptions out there and what
kind of certifications you can actually get. There's a place in the military that does some
stuff, and then there's a place in France you can send product to. Outside of that, that's pretty
much it. And they're not really certifications for, it's like fall arrest, things like that.
And if you want your belt to be routinely certified properly, you have to send batches over
to France, that place over there. All the seams have to be exposed so they can look at it. And
because we're utilizing a sleeve construction for this belt, we have some seams on the inside you
don't see, which means this belt can't be certified. But that's okay, because our goal wasn't to make
this a repelling, helo, assault, military belt. That wasn't the goal. The goal was a belt that is
very streamlined, that allows you to carry a minimal amount of equipment, the essentials of
what you need. We're not trying to load this up with like eight rifle magazines, but give you a
nice, fast, efficient style of belt. We're not trying to oversell it. We're not trying to say
use it for helo operations. So a big difference with the belt itself is we did not sew molle
on the exterior like so many of these other belts. Instead, we did velcro pass-throughs on the back.
Now, there's some advantages to this. When you actually go to weave a molle pouch onto this belt,
all of the weight of that pouch that you're putting on the belt is not being suspended
off of the exterior molle. It's actually being suspended off of the entire belt itself. So for
weight distribution, preventing the pouch from tipping out, there are some benefits there.
It also keeps pouches a little bit tighter to the belt because it's actually wrapped around the
entire belt, not just the exterior molle, depending on how the molle is sewn. So that's something
that's pretty cool. So while this has the appearance of like a slick USPSA competition belt, it can
handle molle pouches on the inside just fine. Another thing that we did that actually makes a
huge difference, a bigger difference than we thought it would, is we utilized the rafter buckle. It's a
Made in America buckle similar to the Cobra, but the main reason we went with this, not just
Made in America, but that's pretty based. The biggest reason we went with this is the buckle
is so slim that you can actually stick the buckle through a Safariland UBL without having to
re-thread, remove the buckle, potentially lose the buckle and keep track of it. You can actually
weave this entire thing through a Safariland UBL and other holster attachments on the market.
That's a pretty big deal because I think if you guys have used belts before, having to undo the
Cobra buckle every time, it gets annoying. Losing it, that's even more annoying. We've hard sewn
some hank on the end here so that the buckle cannot be removed. So don't try, don't try to
remove it. It's not going to happen. Literally just weave this through the UBL, which we'll
show here in a little bit, and you will be just fine to get that UBL onto the belt. You're good
to go. Another thing about the belt that is very convenient is it's very fast to adjust on the fly,
and we all know it based on what you wear or maybe how much you've eaten. You go to put your belt on
and you go, wow, it's looser or tighter than it needs to be. I need to change it up because maybe
you're wearing more clothes or something like that. But instead of having a bunch of tri-glides
and whatnot, we literally just have the webbing woven through the male side of the Raptor buckle,
which means you can tighten it very easily and loosen very easily. This is another reason kind
of why the whole weight rating and fall rating and all that, generally they want to see a metal
tri-glide or something to help prevent this from going all the way to here and then you're hanging
off of a loose belt. If you wanted to add one of those, you probably could if that's something you
really care about. But generally speaking, what I do is I tighten the belt down a lot because I
like having my belt pretty tight. And then I just take my excess and I can either weave it through
the one wrap here on the front just to kind of keep it nice and snug. Or if you're lazy,
and I usually do this, just wrap it on the inside, tuck it into your pocket, and you're good to go.
But really fast to adjust on the fly. That's another thing I really like about this belt.
There's not a lot of complication going on. So we have a bunch of different belts built here
that I want to go over because you guys might think like, hey, what does the belt look like with
MOLLE pouches on it? Because I did talk about how a lot of the two-piece belts out there,
because it's only one and three quarter, there isn't really room to weave MOLLE in and out like
MOLLE is supposed to be used. So you can't really do that. So how on earth am I using
all these different kinds of MOLLE pouches on this belt right here? Because it looks like
a competition belt, not a tactical belt, which there aren't tactical belts because that's not
what tactics are. But so let's go over some of these belts one at a time. So this one right here,
pretty straightforward holster. I've got a med one that's just woven on. I have a Spiritus small GP
pouch, and then I have a couple of Mars carriers. In this case, I'm utilizing the belt with just
belt attachments. The Mars carriers have tech locks, which is my favorite way of, on this
particular belt, my favorite mag carrier for it. I use some other ones out there depending on,
you know, what kind of weapon I'm using or whatever. But Mars carriers, really easy to
pop on, take off, switch up if I want to ride all pistol, one rifle, two rifle, whatever it is.
The Spiritus GP pouch is really nice because they do have a built-in belt slot on the inside. I
recommend when you buy pouches, if you're running a belt like this or this belt in particular,
try to get pouches that have built-in slots to actually weave directly onto the belt. It'll be
a lot more sturdy and just better in general than relying on the woven MOLLE. And to be frank,
I'm not a huge fan of the MOLLE that Spiritus does. It's kind of flimsy. I prefer older school
stiffened MOLLE or the use of malice clips. So, got that threaded on, really effective.
The med one, when I originally designed it, I wanted small loops on the exterior for
regular pants belts. I was using a Ronin belt at the time. Obviously, it's future-proofed,
works on our speed belt. That's really nice. Keeps the medical kit nice and snug to the body.
And then I have my Safariland UBL, which is pretty, you'll see it on all these belts,
pretty standard. And that's how I have this one built out. So, no MOLLE in use,
just the overall belt, and it works just fine. Moving over to a more tactical belt,
we have another one. And in this case, we actually have a belt pad. There's a few
companies out there that make belt pads for two-piece belts, such as the Speed Belt and
other ones out there. Basically, it converts your two-piece competition-style belt into an over-the-
pants, war belt, combat belt, whatever you want to call it. So, in this case, this is one from
Minerva Tactical, a really cool guy over in England, making this, kind of adapt it into an
Orion, kind of. But in this case, I have a bunch of MOLLE pouches. I've got two S-TACs set up with
mouse clips. These are the new mouse clips that are all squiggly. I don't like them as much,
but they work. And as you can see, it's a nice tight fit to the belt itself.
The other thing about the pass-throughs, I didn't mention this earlier, but the nice
thing with the pass-throughs is once you've actually added a bunch of MOLLE pouches,
you can see that the Velcro hook field is undisturbed. You don't have all this stuff
that's actually preventing the belt from being adhered to your inner belt, because they're
going underneath, which is super nice. In this case, I have a more traditional MOLLE pouch.
This is an Eagle four-cell, you know, GP pouch. And these are traditional MOLLE loops,
which I've woven underneath. This one, I guess, came unbuckled. That's not very cool.
I should tape over that, because this is very traditional. But what I did to make the pouch
a little bit tighter to the speed belt itself is I ran a piece of tape under here. You could also
use like a zip tie or shock cord, and that helps prevent the pouch from jumping all around. But
that is something you're going to have to do if you're trying to run some of these traditional
pouches on two-piece belts, is try to prevent some of that slack from allowing the pouch to
jump up and down. But I've loaded that pouch down, run it a little bit, and it's not moving
around. Again, med one, it's belt slotted onto the belt, good to go. UBL, solid, belt pad,
and we're good to go. So that's just another way you can run the speed belt if you do want to sort
of flex it into a more tactical roll, if that's what you want to call it. And then this one over
here, this is a little weird. You guys have already seen some footage of this. This is sort
of a shotgun, a nice little shotgun setup. And on the inside, we're running the speed belt,
you know, we're running standard belt worn pouches. We've got two shotgun caddies from
Safariland. We have a Mars carrier right here. I do have adhesive Velcro on the inside to, again,
give more adherence to the inner belt because that's pretty important. Med one, once again,
slotted right on, super easy, super simple. And then over here, I actually have a Arbor Arms
multi-mission, I can't remember the name of it. And this comes with little flimsy,
lasered MOLLE straps. And I do recommend, if you do plan on running MOLLE pouches on this,
try to run malice clips instead of whatever MOLLE the pouch has. Running the MOLLE can work,
and this kind of goes for any pouches out there, but since you're not able to utilize all of the
MOLLE squiggling through every single row, you really want to have the hard plastic of the
clips from Tactical Tailor. So in this case, that's what's making this pouch. And as you can
see, nice and tight to the belt. This is proper. This is lovely. This is great. If I were using the
MOLLE straps, I'd have to use some tape and kind of prevent it from jumping around. And then once
I fill this thing full, it's probably going to move around a little bit anyway. So I do recommend
picking up a handful of mouse clips if you do plan on building out all kinds of MOLLE pouches on the
belt. And it's pretty easy to just take the existing MOLLE, tuck it in underneath, mouse
clip on top, and you're done. Now, I've personally been using these belts for about a year and a half,
close to two years, something like that. And I've been using the same one this entire time.
And I want to show that because it's pretty cool to actually see a belt that's had quite a bit of
use because I'm on the range like three days a week, and I've been trying to hide and redact
this belt as much as possible. You all have seen that. This is in multicam black. This was before
we did the pass-throughs. So I primarily have been running my Tek-Lox with Velcro on the exterior.
This is the same dump pouch I've been running for, I think, four years, five years now. It was one of
the last prototypes before we went into production. And as you can see, all of this is still running
strong. The hook Velcro is still good to go. There's definitely some little debris and stuff
in there, but I'm still throwing this belt on and it's fine. It is important to note though, because
you are dealing with hook Velcro, this is especially for those of you that haven't used
a belt like this, whatever materials and products that you're using in conjunction with that belt
is going to fray and get fuzzy. In this case, you could see the strap material holding the
rafter buckle male end is quite fuzzy. And I've actually taken a lighter and burned all this fuzz
off, I think once before. The Velcro is going to just be abrasive with whatever you're using.
It's not necessarily destroying the gear. We're not going to see an equipment failure from just
the Velcro pulling out fuzzies, but it is something you're going to see if you actually
use your gear and don't just buy it, put it in a box in your closet and use it once a year.
So this is the belt that I've been running and no, we're not going to make our belts in
multicam black. This one was made as a prototype, so don't ask. But what I really like about this
belt and why I've been using this so much for the last two years is it's very easy to modify on the
fly based on what I'm doing. For example, if I decide I just want to shoot a bunch of pistol
stuff, I can literally remove, this is why the Tek-Loks are awesome, my mag carrier, I undo the
Tek-Lok, get rid of that. And now I can add Mars carriers for Glock or Mars carriers for a different
pistol. I can pop the holster off if I have a QLS, which is typically what I run. I have one of these
instead of this competition holster because I was getting ready for a match and I can literally just
slot this pouch on and now I have three magazines or should be able to slide them all down.
I can move the dump pouch or remove it completely. And so now I've got my fourth carrier. So if I was
shooting USPSA or something, or maybe I'm just doing a lot of pistol drills and I just want to
load up on mags, I'm good to go. And this is where one area where this belt could be really nice is
if you are shooting a lot of matches and whatnot, and you don't want a ton of extra flare that some
of the other belts, you know, out there have. And you just get one of these in black and it just,
you know, doesn't look like a tactical belt at all. It doesn't have any molly on the exterior,
but little do people know you've got that molly underneath when you need it, when you need to rig
up some, you know, munitions or whatever on the exterior of your belt. But that's essentially the
speed belt. I've been using it for quite a while now. I used obviously a lot of two-piece belts
in the past from other companies. And again, all the other products we showed earlier,
it's all a good product. It's not crap. That's not why we made this belt. We made this belt
because we wanted to add a few more features to the market, make a belt that's a little different.
And for you and what you're looking for, the Ronin belt might be better. Maybe you want multi-cam
with molly on the exterior. Maybe you want the bison belt. Maybe you want some of the new ones
that are being made by some of the big influencers out there. It all comes down to what you want with
your money that you work for. You do not have to buy this belt. You don't have to buy those belts.
You don't have to buy a belt at all. To be honest, this is just another option for you guys. If you
are looking for a belt that hopefully can stay in stock, you know, as times get weird and everything
goes out of stock, it's just another option for people. There are some little nuances and features
we built into this belt that we haven't seen with some of the other belts on the market,
which is why we make product. But this is nothing revolutionary. It is not the best belt out there
because nobody knows what actually the best belt is. It would take way too much testing to actually
figure that out and based on why and what, and it would be a lot. But this is a belt that does a lot
of things very well. And if it's something that you think will help you and what you're doing,
training, being prepared, then you should definitely check it out. Hope you guys have
found this video helpful on belts in general, and I'll see you guys next time.

