Masaya: Return of the fieldwork

Discovered in China
13 followers
7 Video Views·Dec 12, 2024
A series of blog posts about being a volcanologist during and after fieldwork. This is video 4 of the series.
Hello everyone. Today we're working on the flanks of the volcano because we want to get some
UV camera data. I'll show you that in a moment. But first we have to get to our site because it's
through this jungle here. To get to the best position you need to do some hiking. So off we go.
Oh no, just kidding. The car's right there. It's just on a path down the road. I think I might call
this third fieldwork video Return of the Fieldwork or something. I'm not sure we've had enough puns
in these videos yet. Okay, so just a short walk down this track here we've set up. We've found a
good position. So I'm walking through a lava field. I think it's about 300, 350 years old and it's
quite extensive. You can see it spreads all the way this way and you can look downwind as well.
Downwind, downslope, that's all there. This is all lava flow from a previous eruption.
In the distance, in a moment, we're going to be able to see the plume. So you can probably see the
plume behind me. It's that darker streak across the sky. In a moment we should be able to see
the summit. So the current degassing centre where the lava lake is, I think it's a crater Santiago.
So try and see that there. That's where the plume is coming from and that's where it's going to. So
we can see it's coming out of, oh I find it difficult to point in the right direction,
that's where it's coming from. That's the crater Santiago. I have a better view of it over here
behind this tree. There we go. Tom and Rebecca discussing some important science there. Tom
his shirt out just for this video. Knew it was going to happen. That's the shade tree,
the most important point in a fieldwork location. So we can see here we've got our UV camera here
set up looking at the gases coming out of the plume. So mostly that plume is containing
gases like carbon dioxide, sulphur dioxide and water vapour but we measure in particular
the sulphur dioxide because it's the easiest to resolve over the background
concentration of other gases. So this is this. This is this relatively well-finished
pellicase looking thing. So it's a really hard case. So this is something we've pretty much
developed and is ready to go and just take it out as it is and start working. The thing with all the
duct tape on the top, so this thing up here, that is our spectrometer. So this as ever with
all these design and testing stages things look a little bit terrible and one of the things which
is most important in the field is duct tape. I don't know where we would be without duct tape
in the field. Sometimes it just manages to secure things wherever you want it to and we've got this
box duct taped to a tripod with all the batteries and the pies and stuff in there as well.
So literally what we're doing here is we're measuring the amount of sulphur dioxide coming
out of this plume so the UV camera takes images of this, of the gas coming out every,
approximately every two seconds and from that we can work out in a similar manner to the
spectrometer like I told everyone yesterday or in my last video, we can work out the amount of gas
coming out on a sort of a per second basis with the UV camera. So that's it from what we're doing
today. It's a nice relaxed session this. Don't have to do a lot once everything's going.
So I will be back with another video soon.
