The Stahlhelm's Predecessor: The German Gaede Helmet aka M1915 Stahlkappe | Uniform History

Uniform & Arms
3 followers
1 Video View·Dec 9, 2024
Welcome everyone to another episode of the History Up.
Today we will be covering a rather obscure item from World War I, the German Gätehelm,
otherwise known as the M1915 Stahlkappe.
These skull caps were made in very small numbers and used for a very short period between the
famous Pickelhaube and the infamous Stahlhelm.
Anyway, enough with the intro, let's begin.
1914.
The world is thrown into upheaval as Archduke Franz Ferdinand of Austria and his wife Sophia
Exactly one month later, Austria-Hungary declares war on Serbia and almost immediately a majority
of the continent erupts into a full-scale war now known as World War I.
However, many nations soon realize that they are ill-prepared for the new trench warfare
seen across most of the European theater and beyond.
Troops quickly begin to find that their uniforms, similar ones to which they had been wearing
decades prior in older forms of warfare, were not cutting it.
Germany marches to war with their famous Pickelhaube helmets, mostly made up of leather.
France sends in troops wearing blue and red uniforms sporting the classic cloth keppie
hats.
England is nearly the same with their peaked caps.
It's not long until nations notice that their forces are sustaining large-scale and often
deadly injuries from not only gunfire but also shrapnel and debris thrown by artillery
bombardments.
One of the most vulnerable areas?
The head.
And so, many countries begin designing new and more protective headgear.
Although Germany allegedly began researching and designing theirs first, both France and
England beat them to issue.
The French start off with a small steel skullcap worn under keppies and then the newly designed
Model 1915 Adrian helmet, whereas the British begin issuing troops with the M15 Brody helmet.
Regardless of the designs, with a quick rollout, many Allied forces receive these helmets by
the end of 1915, which resulted in a massive drop of head trauma-related fatalities.
Germany, on the other hand, sort of took their time switching out their older headwear for
more modern and protective helmets.
This however wasn't acceptable for some army units and their commanding officers, one of
which was Army Group Gaeta.
Later known as Army Detachment B, Army Group Gaeta, named after their commanding officer
General Hans Gaeta, was stationed at the easternmost wing of the Western Front.
Although it was relatively quiet compared to the rest of the front lines, they did have
to deal with constant artillery bombardments.
Though this was a common thing to deal with, Group Gaeta forces began seeing a higher than
normal rate of head injuries from the artillery, as their location, Vosges, an eastern region
of France located right up against the Swiss border, was comprised of mostly rocky terrain.
Whenever shells came down they would explode and send both shrapnel and shards of rock
into the heads and faces of troops stationed in their trenches.
Seeing this, Group Gaeta began to request the German War Ministry for better helmets
to protect their forces.
However, since they were still months away from completion, some of Gaeta's men took
matters into their own hands.
Fine.
I'll do it myself.
That's right, and so in 1915 the Army Group began experimenting with designs to create
a protective headpiece.
With the undertaking initiated and led by the Army Group's Chief of Staff, Uebersleutnant
Hess, in the Group's artillery workshop, the M1915 Stahlkapp, or more commonly Gaeta
Helmet, was born.
Technically more of a browplate, this helmet was made up of two pieces, a cloth and leather
skull cap which served as the liner, and a 2kg 5-7mm thick chrome-nickel steel piece
that partially covered the top of the head, the forehead, and finally the nose.
It included two straps, one on the back of the cap so that it could be worn over a variety
of head sizes, and a second one on the sides to securely fasten it to the wearer's head.
With at least four known versions made, these were limited to only 1,500 pieces, as they
were technically not approved by the War Ministry, which resulted in Hess nearly having to fund
the project himself.
Many wearers found the helmet both uncomfortable and heavy, but it did help lower the number
of shrapnel casualties on the front line, even if it did leave the back and sides of
the head unprotected.
Come February 1916, however, the German Army finally began receiving proper head protection
in the form of the M1916 Stahlhelm.
Once this was done, many of the Gaeta Helmets were collected and melted down so that the
metal could be used to create more of the new helmets.
However, the idea of thick plating protecting the front of the head lived on with the mountable
front plates called Sternpanzers, which were issued in small numbers along the M1916.
Today, only a few pieces survive, many of which are in museums.
There are still a few privately held ones that occasionally go up for sale.
Usually these go for a few thousand dollars.
Reproductions are available online, and usually go for around $70 to $100.
And with that, we've come to the conclusion of another episode of the History of.
For those of you wondering, yes, we will be covering the M1916 Stahlhelm and other variants
as well as the Adrian and Brody helmets in due time.
But for now, we hope you found this video informative and entertaining.
Remember to subscribe or check back for more videos right here on Uniform History.
