Flinders University - Palaeontology Preparation Labs

Ancient History
96 followers
18 Video Views·Dec 8, 2024
Hi everyone and welcome to the Flinders University Paleontology Labs.
My name is Aaron Kamens. I'm a lecturer in paleontology here at Flinders University
and today we're going to take you on a behind-the-scenes tour
of what goes on here at Flinders Paleontology.
Now as you can see we work all across the state in a whole
range of different areas and also on a whole range of different organisms.
Everything from some of the oldest fish in the world
and that first transition onto land through to the
extinction of the giant megafauna that used to roam
when humans first lived in Australia. Now it's a pretty special place to work
and we can't talk about everything we work on
so one of the sites that we're really going to be focusing on today is a place
called Lake Calabona. Now Lake Calabona is a place that's at
the top of the Flinders Ranges just north of Adelaide. So it's about a
full day's drive to the top of the Flinders and then we
head out to Lake Calabona. Lake Calabona is a very special place
because it's where thousands and thousands of megafaunal animals
got stuck in the mud. So there are whole skeletons preserved there,
there are gut contents, there are skin, fur and feather impressions and
sometimes we even find the poucher, the joeys, still in their
mother's pouch from when mum got stuck in the mud.
We're going to divide the tour into two different parts today.
The first part is going to look at the preparatory lab
and how we go about preparing the fossils after they come in from the
field. The second part is going to be focusing
on our clean lab which is where all of the fossil study takes place.
So you'll be hearing from various different Flinders paleontologists
about what they're studying and what they're doing.
G'day, my name's Kerry and I am the lab technician here at Flinders University
in the paleontology department. So in paleontology
I would be more known as a preparator because fossils need to be prepared for
study. So one of the ways that we prepare
fossils is of course to release them from their rock, what we call the matrix.
Now some fossils are particularly hard and difficult to remove
so we've got some special tools. This is called a micro jack. This is
basically a tiny tiny jackhammer. It's an air
powered tool, the little blade at the end oscillates
up and down 100 times a minute and you just use
this to chip away at the rock extremely
carefully and release the bone. Micro jacks come in many different sizes
from extremely large to tiny ones that I use under a microscope
but for a specimen like this, this size here is ideal.
So here we've got a collection of bones that have actually been found
out at Lake Calabona and Kerry's going to tell us a little bit about
how we go about collecting these bones and some of the challenges that are
faced when we collect these things. Okay well
the first thing to know about the Lake Calabona specimens is
that Lake Calabona is an extremely remote location.
It is a long way from home to go and get these guys
and there's nobody else out there to help you.
The second thing about Lake Calabona is it's a salt
lake. It's muddy, it's salty. The fossils are preserved in this
environment and as soon as you begin to excavate
them they can begin to deteriorate because you've changed
what preserved them in the first place. So to collect a fossil
we would walk around the lake until we found the tiniest bit of bone sticking
up over the surface of the lake. Erosion would naturally expose these
fossils. Then we dig a huge trench around the
bones. We wrap a plaster jacket around them
until we make almost like a white egg to protect them
and then those eggs come back in the car with us all the way back to the lab
and in the lab we open them up and we actually see what we've got
with our fossils. But the fun doesn't end there does it? No
like I said you've changed the preservational environment so as soon as
you open your eggs these fossils start to degrade. Salt
can come out of the bones, form a nice little salty crust on them
and actually deteriorate and smash the bones up.
A lot of these bones are not preserved perfectly.
As we can see here this one's crushed and smashed
through weight of sediment on it, through
all sorts of erosional factors and it's been well over 40,000 years. A lot can
happen in that time to a specimen. So my job here is to not repair these
bones but to make sure they never come apart
in the first place. Today plaster jackets. I've got my
fossil here. This has come out of the field,
it's been half prepared. The other half underneath
still needs a lot of work. Plaster has been used in this industry
almost for the entire length of the industry. It's a great
cheap portable substance that can make hard shells
around otherwise impossible to move fossil material.
So you may have seen something like this
come out of the field when people are digging fossils. This is just a plaster
jacket tightly wrapped around the shape of a
bone. The plaster jacket means that we can pick this up,
it's tough, we can transport it. If this bone wasn't in this plaster jacket
I would not be able to pick this up. It would crumble into hundreds of tiny
little pieces. So this keeps bones safe until we can
get them back into the lab, harden them, clean them, get them ready
for study. The process of plaster jacketing is very
simple. First of all we use tissues and some
water. I'll stipple them on with a brush to get a nice form fit layer.
This will be our separating layer between our precious fossil
and the subsequent layers of plaster that we'll put on.
The separating layer means that as I'm digging down again
I know exactly where to find that fossil because there'll be a coating of tissue
and nothing else will stick to the fossil itself. After that I'm going to
put a layer of wet sand over the top of the fossil and the
sand is going to fill up all of these holes,
all of these gaps, all of these little details and make a nice
smooth dome for me to put my plaster shell over.
If I don't have a nice smooth dome the plaster itself will go into these
crevices and will catch on the fossil and we can
actually break fossils trying to get the plaster off again.
And the last step will be of course the plaster jacket itself.
Often we will use hessian and powdered plaster
in the field because it makes a nice strong thick heavy jacket
but today because we're in the lab I'm going to use these pre-made plaster
bandages. Let's get on with it.
I've finished stippling tissue all over the fossil.
It's a nice separating layer probably about two layers thick of tissues just
to keep it all safe and secure. Now I can put this away bring out some
nice slightly wet sand and I'm going to
coat this with a protective layer of sand.
Remember when I turn this upside down this fossil will rest
in this sand. This sand is the cushion that's going to keep this
from snapping off all of these delicate little pieces.
I've finished my sand. As you can see I've made a nice smooth
shape. There's no undercuts, there's no places for the plaster to get caught.
Later on when I need to release this fossil from here it'll be just a matter
of sweeping the sand out of all those crevices and cracks.
So now I can get on with the plaster. So these plaster bandages
are magnificent. They've already got plaster inside them.
They're very very quick and simple to use.
We just dip them in some water and start to lay them over
our specimen. I've got one layer of plaster bandages on this fossil.
Now this looks lovely and strong but it actually isn't. This is a
paper thin coating. In the field we would cross
strap and we would build a very very strong
maybe a centimeter or more thick plaster block
to go on this. But in the lab, because I'm just going to turn this over and remove
more weight, I don't need anything near as strong.
However I am going to mix up another batch of just pure plaster
and thicken this up to give it a bit more strength.
Easy. So what I've done here is made a nice solid base
for this fossil to rest on. When this is finally dry
I'm going to turn it over 180 degrees then
cut what's now the bottom off of the fossil so I can access the other side
without having to lift, manipulate or otherwise damage
a fragile specimen. This will be ready tomorrow.
So here we are with Isaac Kerr. He's one of the PhD students here at the
Flinders University Paleontology Lab and he's working on some of these
fantastic fossils that are coming out of Lake Calabona.
Isaac, would you like to tell us a bit more about what you're working on for
your PhD? Yeah sure. So I'm working on
protemnodon kangaroos which is a genus of
giant kangaroo that died out about 40,000 years ago
and the very last of those we can see at Lake Calabona.
This is one of them here. This is an old female
protemnodon and as you can see when I compare it to a red kangaroo skull
it's a very very big kangaroo and we found her lying on
her side in Lake Calabona. So unlike a lot of the other specimens she wasn't
found to have died bogged. She was lying on her
side which suggests a different mode of death which is very
interesting. Now not all fossils are entombed in mud.
Sometimes they're entombed in much harder things and that means we need to
use different kinds of preparation techniques
to be able to access the fossils. Arthur Crichton
is doing his PhD on one of these sites that's quite challenging to prepare.
Arthur, do you want to tell us about how you prepare these fossils?
I'm doing my PhD on a site in the Northern Territory which preserves
some of the earliest representatives of modern Australian marsupials and
one of the, which is great, which is really exciting
but actually prepping out the material from the rock is really quite
challenging because the material is highly
fragmentary and it's relatively soft
compared to the limestone which it's encased in.
So I use weak acetic acid to dissolve away the limestone and
extract the bones. How do you make sure that you're
I make sure that I harden the bone every time
the rock comes out of acid so that the newly exposed surfaces don't fall apart.
So for instance this crocodile snout here
took about five months to prepare out. So a lot of work goes into this before
we can actually see what fossils are hidden in these rocks
but they're super important. Other deposits like
the Wellington Caves that Diana Fusco is working on
face similar challenges. So here we can see the before and after
effects of acid prep on material from Wellington Caves. As you
can see it's very dense with well-preserved small
bone material. And we'd never find any of that without
these techniques would we? No that's right. Now we don't just work
on fossils here in the paleontology lab. Part of understanding extinct organisms
is to make sure that we've got a good comparative collection.
So understanding the morphology of modern organisms is really important too.
And it's skeletons like this that we use in our undergrad teaching
that'll give you a chance to understand how animals are put together
and how we go about interpreting those in the fossil record.
One of the other things we do here in the prep lab is
we make casts of fossils. There's a very good reason to make a
cast of a fossil because something like this
if it was real you'd be unable to pick it up. It would be too fragile
possibly too heavy. So we make plastic ones
that look exactly like the real ones. They're the same size they're the same
shape. Here's one unpainted and here's one that
we have all painted up as a finished product
ready for people to use for study or for reference.
So for those of you who are interested in paleontology another part of my job is
to manage volunteers here in the lab. So we have regular volunteers that come
in to help prepare fossils to help us sort through our sediments to
pick out the tiny little rat teeth and to help with moulding and casting
and other just general lab activities. So for more information on that hit the
website or follow the links. Cheers.
