DIY Miniature Gingerbread House (Polymerclay) Christmas Craft

DIY Cute Things
114 followers
Hello! Today I'm going to be making a miniature gingerbread house out of polymer clay. I will
list all of the materials you need in the description box below. I like to make all
of the decorations first so that they can be baking while I work on the rest of the house.
I rolled out snakes of red and green clay then I cut off tiny pieces to roll into balls.
These will be used to decorate the roof and the gingerbread men. For this part I made the meringue
shape out of polymer clay, baked it then made a silicon mould of it which means I can mass
produce them. Once the mould is set I pushed a small piece of clay firmly into it then simply
bend the mould to remove the clay. For the candy canes I made a large cane with white in the middle
and red and white vertical stripes on the outside. I then rolled it out into a small snake and
twisted it and bent it into the candy cane shape. For the gingerbread men I made another silicon mould.
It certainly makes it quicker if you're making lots of them and they pop out so easily.
Then I bake all of the decorations and move on to the next stage. To make the icing I mix white
polymer clay with Fimo liquid deco gel and some baby oil. I mix it thoroughly with a palette knife
adding more baby oil as I go. I don't have a set ratio that I work to, I just add more oil if it's
too thick or more clay if it needs it. You want it to be thick and creamy but still smooth and
spreadable with no lumps.
For the house I mix together a blend of tan, orange and brown clay to the desired colour.
Then I roll out a thin sheet using a clay conditioning machine. I add texture using a
bristly brush and some coarse sandpaper. Then I laid out my template and carefully cut out the
sections for the walls and the roof using a craft knife. I also used a cookie cutter to cut two
layers for the base from a slightly thicker slab. I lightly brush on some soft pastels in a darker
shade for a more realistic baked look. Then I bake them for around 20 minutes at 130 degrees celsius.
Please follow the baking instructions on your clay as different brands can vary. I like to cover
mine with tinfoil to prevent them from burning. Next I decorate the gingerbread men by adding
faces and buttons. I use Fimo liquid deco gel to stick them down. Then I bake them again.
I could honestly make these all day, look how cute they are! Once all the walls have been baked and
cooled down it's time to assemble them. I join two walls together with the same coloured clay,
smoothing down the joint with a dotting tool. Then I bake them again. There is a lot of baking
involved in this project so allow yourself plenty of time if you are planning on making these.
Once that is done I join the two sides together. I also attach the roof using the same method.
For this one I decided to add a metal loop on the roof so it can be hung up.
I used a needle tool to chip a hole in the top centre of both roof panels.
And for the loop I used an upside down earring hook. I used small pieces of clay to fill any
gaps, smoothing down with the dotting tool. I lay down a thick layer of the icing on the base
and place the house on top. I also place the door in position and add a couple more details before
baking again. Then you guessed it, it's time to bake again! Once it has cooled down I start icing
and decorating the roof. Then I decorated the house by adding icicles, the gingerbread man,
a tree, candy canes and the meringues. Then I baked it one last time and added a string to hang it from.
And that's how I made these adorable little gingerbread houses.
These make wonderful handmade Christmas presents and are perfect because they don't take up too
much room. Thanks so much for watching, I hope you enjoyed this tutorial. If you did, please
give it a thumbs up and subscribe if you want to see more miniature vlogs and tutorials.
