First 5 OEM Mods for the 2024 Tacoma!

Screw Driver
87 followers
Dec 6, 2024 #car
#car#automobile#business#consulting#salesagent
📍 Get 20% off onX Offroad maps using my code "ChloeKuo" or link! 📍
https://webmap.onxmaps.com/purchase/o...
Hey guys, it's Chloe. Welcome back or welcome to my channel.
Today we are continuing on with installing parts
for the 2024 Tacoma, and if you've watched my videos before, especially the
ones where I do modifications, you guys kind of
know my style where I like to pick out parts for my vehicle,
especially ones that I think serve a good purpose or
you know maybe make life every day better for me,
enhance the on or off-road experience, or
sometimes are just straight up cool to me.
And I like installing all these on camera, documenting them here on my
YouTube channel for you guys to watch. And what's special
about this video today is that all the parts
in here that I've curated come in these fancy Lexus Genuine Parts,
Toyota Genuine Parts printed boxes. Yes, because they are all OEM
parts for the Tacoma, well except for one of them, but I wanted to sneak this one
particular one in because I feel like it should be an OEM part.
You guys can be the judge of that though. But anyways, what I recently did was I
went on the Toyota website and looked at all the parts you can get
for the new Tacoma, the 2024, and I was quite shocked at the amount of
offerings that they have right now from themselves. Like normally
I'm turning to the aftermarket space to find
upgrades and parts I need, but surprisingly Toyota has come up with a
good selection of OEM parts that fit the new truck.
So I think I have a good mix of some standard predictable parts, parts I've
installed here on the channel before, but for
my previous Gen Tacoma that are now going on this truck.
But I also found some pretty unique ones that I hope
you'll like. I definitely think they're cool, useful,
and I'll show you how to install all them in this video. By the way, all the
OEM parts in this video came from sparksparts.com. They're all
going to be linked down below as well as the
discount code. I have had four sparks parts always available for
you guys to use if you see a part in this video
that you like or maybe you're working on another project
on one of your other Toyotas and need OEM parts.
You can use that discount code, save a little bit of money, but
anyways let's get into the video. Alright we're gonna get right into it.
I'm starting out first with the simplest install,
adding all-weather OEM floor mats. And I know floor mats seem like such a
one-dimensional topic to talk about in a video,
but I do have a lot of my own opinions about them. Okay first things first,
how could a truck with off-road in the name come with carpet floor mats?
I personally think that's kind of a sin, but hey that's how they get you. So let's
replace them. You can see the fronts are locked down to
prevent accidental trapping of the gas pedal,
and there's some interesting history from 2009 when there were recalls about
this. You can look it up if you want. So this
locking mechanism is highly important. But anyways the old ones are out in
about 60 seconds, and here's me unboxing the new one. I want
to note that I have a previous gen Tacoma as well that has the OEM
floor mats, and these are very similar, but interestingly enough
for 2024 one of the changes they made is that the rears come in two separate
small pieces rather than a single molded middle piece.
Obviously offering less protection, but it is a lot easier to put in and take
out to clean. So when it comes to floor mats, a lot of
people will tell you WeatherTech and Husky
are the best of the best, and I can't argue there. Those mats provide way more
coverage than these OEM ones. They're thicker, but I still decided to
opt for OEM because the types of activities I do in this truck are mostly
dry like desert and sand, but if you do more
activities that might involve mud like maybe hunting
or live where there's snow, I definitely recommend
looking for something with better coverage instead of these. I will surf on
the rare occasion, but not enough to warrant those heavy duty kinds since
I'm not slinging a ton of water inside the truck, so
OEM all weather is a good happy medium because of the fit, the improvement over
the carpet ones of course, and appearance. And accompanying my
floor mats is a single piece OEM bed mat which
even though is large, I still was able to get shipped from Sparks.
Not really much to show you on an install here, so I'm just kind of showing
you the after, but it's good. Doesn't cover up my
Charvonia design billet tie downs, but nothing else much to say except that
this has been a nice upgrade since before
Cody's crate was slipping and sliding back there.
So I am very glad I managed to get the bed mat and especially the floor mats
installed just in time. I actually put them in a couple days before I took this
truck on the dirt for the first time and I feel
like just my first couple off-road trips I've
definitely gotten my money's worth out of these floor mats. You guys might
have seen my video where I took this truck out to the desert for the first
time to do a lot of fun off-roading, practice driving
in the soft sand, and this truck definitely got dirty on
the inside especially because there was a passenger with me. So the
mat saved a lot of time when I was cleaning this truck just in terms of
like wiping the town, vacuuming, and also of course if I
didn't have them definitely save the carpet. So I highly
recommend them, keeps the Tacoma clean and pristine and
looking nice and everything, and at least for me I kind of think
that they are one of these modifications that help
keep this balance of my Tacoma being an off-road
adventure having fun vehicle which inevitably
is going to get just dirty and still nice enough for
on the street. You know I feel like there doesn't have to be this
one or the other, you really can find and strike that perfect balance.
You know something I like to talk about a lot in my videos or at least kind of
underlyingly show is that in a lot of cases you don't need
a lot of crazy modifications to go out and adventure and have fun.
Yes eventually on this truck I'm going to go bigger with wheels, tires, and
suspension, but for now and for a lot of you guys
who talk to me about just getting started, maybe this is the
first off-road vehicle you own, something like this is a great first
modification. And if you are one of these people just
getting started with all this stuff and really excited to go adventuring,
something that I've been sharing with a lot of my own friends who are kind of
in the same boat is to check out Onyx Off-Road Maps because
it's an app that allows you to find trails that
fit your level of off-roading that you can do and find places that your vehicle
is and isn't capable of. Actually in this
truck a couple weekends ago I had a group of co-workers that wanted to do a
trail and with this vehicle pretty much being
stock when it comes to off-road capability and also in our
group having just a variety of vehicles, some
stock, some not, some with 37s and others like me who
basically have 31s, we were able to use Onyx Off-Road to find a perfect trail
out in Ramona close to where we are in San Diego
that we could all comfortably do and have a fun weekend in. I mentioned Onyx
Off-Road because they are partnering with me
for this Tacoma build and I really couldn't be more excited,
stoked, and grateful to work with a company that makes a product that I
myself have been using for years and absolutely
love even before all of this happened. As a
customer myself I am happy to recommend Onyx Off-Road and if you watch my
desert video I showed you guys there how to use Onyx
to navigate to some great spots and I linked some of my own
favorite waypoints so that you guys can visit them as well.
It's also just like a safety thing for me you know going out on these trails a
lot of times you don't have service but with Onyx you get
offline maps and I think my absolute favorite thing about using Onyx Off-Road
for so many years just has to be that you know
it's got a really low barrier to entry, it's
very user-friendly, very easy to use, and it's assisted me
on a lot of my adventures in my Toyotas
all these years. The discount code that they gave me to give to you guys
is pretty good too, 20% off their normal pricing,
just another tool to have for your adventures and if you haven't tried it
at all you can actually sign up for free to
just check it out but the membership gives you those
offline maps and trails and I really think you'll like it if you
check it out. Alright on to the next one I think this
is the most fun one and this is actually what the
after result looks like. It's very subtle unless you know what you're looking for
and if you didn't spot it maybe this will give you a hint.
It's an illuminating front grille badge and yes this
is a genuine OEM part from Toyota. I was kind of surprised by that.
I don't know what sort of opinions you all have about the appearance but
I'm going to say that I personally am a fan. So let's unbox and install it.
Now being OEM it's all plug and play so you get the badge
plus a wiring harness and I like the form factor
how when it's turned off you can't even tell that it's a light,
it just looks like a badge. The install on this one I'd say
is a 2 out of 10 on the difficulty level so very DIY friendly to most people.
Getting started, since we're working with electronics the first safe thing to do
is disconnect the negative terminal of the battery and I like to take
something non-conductive like an ESD bag and put it around the end to avoid
any accidental contact. With that we'll be able to start getting to the harness
we need which is blocked by the air inlet so I
remove that by pushing in on the four plastic clips holding it in
and be careful not to drop those clips in like me if you can
because the engine bay swallows them up. Next remove the OEM badge with a plastic
trim removal tool by prying it as shown but be prepared for it to pop
out all at once kind of like it did here for me.
A slightly stress-inducing moment until I checked that I didn't break any clips
luckily. Next up take the provided wiring
harness in the kit and feed the end with a black connector
through the emblem holes. Now use this pictorial reference of a
taco on a taco, literally the factory service
manual also shows this, but under here you can feel for the
three-prong connector to tee into that is the daytime running lights.
Hard to show on camera but it is right underneath
that taco on taco and then plug everything together.
All the harnesses are keyed so it's difficult to mess this one up but do
keep the wiring tidy by routing the harness
under the radiator support and grill supports if you can. Basically I'm just
following the wiring that's already there and
zip tying around it. Fit that new light up grill badge on
after plugging it in and now I'm reconnecting the battery to
And boom we've got light so now you can feel better about peeling that plastic
off but don't get too excited yet to where
you almost forget to reinstall your air inlet like me
so be sure to remember to do that. When you add in those clips just push the
middle piece down so that they're flush with the outside
that is how to properly reinstall them and secure that part down.
Now we're done and here's one more time with it off
and on. Okay so I personally think the look
is very very cool. I actually think it looks better with the fog lights on so I can turn
that on right now. I'll turn on the headlights too so you
guys can get the full effect. There it is all the lights on. I don't
know if this is going to be one of those modifications where they're kind of like
raptor lights where you either like them or you don't but
I'm on team yes for the light up front emblem. I just think
it's cool. It's an OEM part. I think one of the best
things about this part too is that under the description
it's called the taco badge sombrero. Now that I'm reading that I can kind of see
it. Moving on do you guys know what these are?
I don't think I saw that these were offered for the previous generation
but these are door sill protectors. Yes another OEM part. You can kind of get the
idea for what these are for but they're meant to prevent scuff marks
since doors tend to get scratches from getting kicked up.
Here's what the texture looks like up close and the install is very
straightforward. I almost don't need to explain it but I
will say you can one-up me here and clean your surface
although I recently detailed the truck after my off-road trip so
my surface was relatively clean and these adhered well to it.
You know what I think would be fantastic? In a year I want to come back
revisit these, show you guys what these look like, show you guys if these things
have any scuff marks and hence if they uh protect the doors
well or not. Now that I'm thinking about it you know I
kind of don't need them on the rear seats because the only person that sits
back here is Cody and like on really really rare occasions I'll
have enough passengers but I guess they do kind of just
complete the look. Now I'm unboxing the last OEM part I have
to show in this video although not the last part as I mentioned
in the beginning but anyways it's this black gloss exhaust tip. It
does not change the sound of your exhaust
but it does alter the look a little bit and I suppose adds a layer of
protection if you hit yours on the trail or something and maybe helps prevent
with denting it which hasn't happened to me yet but I
dinged up the bottom of it when I came in contact on a section on that Ramona
trail a few weeks back and got a slight scuff. Anyways install
here is easy there's a spacer so that the tip fits over the OEM piece snugly
and one bolt to tighten down that holds the tip on using tension.
I will say the stock exhaust just definitely hangs low and this tip adds
more surface area so theoretically I have a higher chance of fitting it on
the next trail but for a lot of people it's going to be pretty superficial and
someone like me is definitely enjoying the appearance of this one.
Okay the last official part install relates to the hood. Can you tell what it
is yet? If you can't it's probably because you,
like myself, would expect this to come from the factory rather than be an
aftermarket add-on which is why in this case I did want to sneak it into the
video but they're gas hood struts from Redline Tuning.
And yes there is nothing wrong with the OEM prop rod and to be fair
this hood is objectively not as heavy as last year's Tacoma
but I like hood struts and I've had a good experience with Redline Tuning
struts on my 2019 Tacoma. Here's everything that comes in the kit
two struts, instructions, brackets that are 100% bolt-on so no
cutting or drilling, plus an extra bolt that we'll need. You
do need a few tools but nothing crazy and I'd say about 30
minutes time. First up I'm removing the top upper
hinge bolt because I need to add one of my brackets here
with the ball stud facing inwards towards the truck.
Always remember to start bolting by hand to avoid cross-threading
especially when using something like an electric ratchet. Now I locate the right
hole for the fender brackets and one side doesn't have an OEM bolt
hence why they provided you with one. And I just repeat on the other side.
When it's time to add the struts in the sockets are pre-greased which is nice
and make sure you mount the strut end on the lower ball stud
and body on the upper ball stud for proper performance.
That's literally all there is to it. I do like the OEM like
fit and finish especially since there's no drilling involved like what I had to
do with my last Tacoma. So anyways those are all my parts I
installed. I hope you guys enjoyed and let me know what your favorite one
was. Be sure to check out my Instagram for extra and more real-time content if
you're interested. But I want to say thank you guys so much
for watching and I hope I will see you in the next video.
