10 Free Fall DIY’s Using Junk You Have Around the House/Free Fall Home Decor

Holiday Decorations
97 followers
Hi and welcome to Canterbury Cottage. If you're like me and don't like to spend a lot of money
on seasonal decor, then you're in the right spot. Because in today's video I'm going to show you
how I created fall decor that looks like it came from a pricey store, when in reality it cost me
absolutely nothing because I only used things that I already had around the house.
So if free sounds good to you, let's get started. Here's an idea for making use of some of your
ugly old fake flowers that you were never going to use in a floral arrangement anyway. Take the
flowers apart, getting rid of any plastic pieces. Then find some small ball-shaped objects such as
the woven balls that you find in potpourri. Wrap an individual piece of fabric from your flower
around the end of a pencil. Add a bit of hot glue and stick it to your ball. Since my balls were
woven, I stuck the flowers in the openings. Repeat this process until your ball is completely covered
in flowers, and then use scissors to trim up the ends. After trimming I could see that I needed to
add a few more flowers, but I was out of the original flowers that I had used, so I just grabbed
some others that were in a similar color. Because I didn't want to throw away the leaves that were
on the flower stems, I decided to use them on my next ball. And since that turned out pretty cute,
I decided to use a sack of autumn leaves on the third ball. I glued the end of a piece of twine
into the center of each of the three balls and then tied the three pieces of twine together.
Then I ripped three strips of some fabric that I had and tied a rustic bow above each ball.
Now let's use an old wooden salad bowl to create a modern looking candle. To begin, I cleaned up the
outside of the bowl with a little lemon oil, which conditions the wood and helps to hide nicks and
scratches. Then I found two old candles. One was stained and one was missing the wick, and I put
them in an oven safe bowl and set my oven at 200 degrees Fahrenheit. I tied a couple pieces of wick
to a straw and laid it across the top of the bowl. I often reuse the wicks from old candles that I've
melted down. I added some fragrance oil to the melted wax and poured it into the bowl, leaving a
little space at the top of the bowl. Once the wax had hardened, I added some dried florals to the top
and then poured a little more wax over the top of those. Once your wax solidifies, if you have
any imperfections in the surface, you can smooth them out by running a heat gun over the top of
candle.
I don't know about you, but I love to read. However, I am so busy all day that I really
struggle to find the time to read as much as I would like. I've tried audiobooks, but my mind
wanders off, and then I'm wasting time rewinding, trying to figure out exactly when I stop paying
attention. Well, recently I've come across an alternative that is working for me, and that
is the Blinkist app. Blinkist allows me to understand the key ideas from nonfiction books
and podcasts in just around 15 minutes. Let me show you how it works. The app will suggest books
that you might like, or you can search by title, author, or topic. Blinkist has over 5,500 titles
to choose from, including All My Favorite Books by Gretchen Rubin, the author of The Happiness
Project. Once you've selected a book, you have the option of listening to the audio recording
or reading it, which I prefer to do in the evening. There's also a feature called Blinkist Connect
where you can share your account completely free with any friend or family member of your choosing.
If you think you'd like to give Blinkist a try, click on the description box where you'll find a
link for a 7-day free trial and a promo code for 25% off the annual premium. Here's another idea
for making use of your old candles and making them look like primitive hand-dipped candles.
Add a little bit of crayon to your melted wax to achieve your desired color, and then
spoon the wax over your existing candle. The wax will get thick and chunky as it cools off,
so you may want to return the pan to the oven for a while unless you like really rustic looking
candles. When you're done, put your dishes in the freezer for 30 minutes and the wax will pop right
off.
For the next project, you'll need a few empty soda cans. To begin, I used a can opener to remove
the top tab section of the can. You should probably wear gloves because the metal can be sharp. Then
I just used a regular pair of scissors to cut down the side of the can. Then I cut off both the bottom
of the can and the top rim. Then I was left with a rectangle of metal, which I ran along the side
of my work table to straighten out. To create a pattern, I taped a fake leaf to my sheet of metal
and then cut around it. You could trace around it if you prefer. I used the same leaf over and over
again. To create veins in the leaves, I folded them in half and then used a small screwdriver
to emboss other veins on the back of the leaf. I spray painted both sides of the metal leaves
with some gold metallic spray paint. Because real branches often break in storage, I thought about
gluing the metal leaves to some faux stems, but ultimately I just like the look of real stems
better. Since I just attached the leaves with hot glue, I'll probably pop them off
at the end of the season and just save the metal leaves for next year.
I don't know about you, but over the past few years I have acquired a number of house-shaped
blocks and frames. I thought they might make cute decor if I could add a small vase in place of a
chimney. I started by drilling a small hole straight down into the roof. Once I had that
starter hole, then I drilled a larger hole using a spade drill bit. For the house-shaped frame,
I covered the inside with a piece of Dollar Tree corkboard and then printed out a couple autumn
images which I tacked inside. For the house-shaped block, I printed out another autumn image and
decoupaged it to the back of the house by applying Mod Podge both to the block
and to the back of the image and then adhering the image to the house and smoothing out the wrinkles.
Once the Mod Podge was dry, I trimmed off the excess paper and applied a top coat of Mod Podge.
Then I applied some hot glue in the hole that I had drilled in the roof
and inserted a small glass jar from Dollar Tree.
Then I inserted some small florals to look like smoke coming out the chimney.
If you like old rusty things like me, then you're going to like this next project.
To create rust on some old tin cans and a bread pan that I had, I sat them in a disposable
container in my garage and covered them with toilet bowl cleaner. A couple times a day,
I would rinse them off in water and then reapply the toilet bowl cleaner.
I just reused the cleaner that was already in my disposable container.
In just a few days, you'll have some really rusty containers.
I like to spray mine with a clear top coat before I use them in any projects.
I decided to attach the rusty bread pan to a scrap piece of wood from my garage.
I made a stencil on my Cricut machine using vinyl from the Dollar Tree.
I applied some black chalk paint using a sponge dauber and let the paint dry for about 20 minutes
and then I peeled off the vinyl. I drilled two small holes in the bread pan and then
attached it to the bottom of the board using two small screws.
Once I was sure that the paint was completely dry, I sanded over it a bit to give it a distressed
look and then I applied a top coat of some clear wax.
I added a used piece of styrofoam inside the bread pan and then I added skewer sticks to the
bottom of some pumpkins that I already had in my stash so that I could stick them into the styrofoam.
I added a few tall stems to fill in the space between the words and the bread pan
and then I filled in around the pumpkins with leaves and Spanish moss.
Now, let's decorate those rusty tin cans. First, I sprayed on a clear top coat. To make labels for
the cans, I taped a piece of regular tissue paper to a piece of cardstock. Then I printed out
some autumn-themed vintage labels in sizes to fit on the side of my cans. I cut out the labels,
applied Mod Podge to the side of each can, and then carefully adhered the piece of tissue paper
into the Mod Podge, applying another coat of Mod Podge over the top and carefully smoothing out
any wrinkles. The labels will be just subtly apparent on the sides of the cans, appearing as
if they have faded over time or been rusted over. As a finishing touch, I ripped some strips of
fabric to create a bow that I tied around the top of each can.
For the next project, you can use a pillow that you already have or make one from some scrap fabric.
I'm using an old bedspread. I folded my fabric in half and then wrote the word
fall across the front of the fabric using a Sharpie marker. I found a roll of trim left
over from a project that I did years ago that I began hot gluing to the fabric. I just used a
little hot glue at a time, going over the letters that I had created with my Sharpie marker. Use
good quality hot glue sticks like Gorilla Glue and that trim will not come loose from the fabric.
When I was sewing, I made sure that the word fall stayed centered on the front of my pillow.
I didn't really like how my F looked, so I glued a little flower on to conceal it.
For this project, I used a metal shelf that was left over from one of those cheap garage shelving units.
I wanted it to look old like it had been painted several times, so first I painted it black and then
I brushed on some white chalk paint. For this shelf, I wanted to create an extra large image
transfer, so I opened up the image in the Print to Size app and reversed the image and then I printed
out one page at a time, carefully moving the image over to fill up the page after each image was
printed. I cut off the margins and then arranged the images on my metal shelf. Then I applied Mod Podge
on the image and laid it face down on the metal shelf, smoothing out any wrinkles. I let it dry
overnight and then the next day I moistened the paper and began rubbing it off with my fingers.
Once the top layer of paper was rubbed off, I used some sandpaper to distress the edges of the metal
shelf. At this point, I felt there wasn't enough contrast between the background and the lettering,
and so I went ahead and painted the metal shelf with some black chalk paint. When the black paint
was dry, I distressed it with some sandpaper and then I sprayed the entire sign with a clear top
coat. It may have been a mistake to paint the sign black, I don't know. You'll have to let me know
which background color do you prefer, the black or the white?
For the next project, I found an old tray that I had previously spray painted black,
but never used. I'm currently a little obsessed with the Modern Masters Rust Effect paint,
so I decided to use it on this tray. First, I gave the tray two coats of the rusty orange primer.
When the primer was dry, I applied two separate coats of the iron paint, and when the iron paint
was dry, I applied Mod Podge to the center of the tray and then printed out a vintage image of
pears using the tissue paper technique. Once the tissue paper was adhered to the center of the tray,
I went over the top with another coat of Mod Podge, and then I carefully tore off the extra
paper around the edges. Then I sprayed the tray two separate times with the rust activator.
Be sure to seal your tray if you're going to use it for food.
If you want more ideas for using junk you have around the house,
here's another video you may like.
