Realistic Indoor Meandering Creek Forest Biome Vivarium

Nature Fish Tank
87 followers
A few months back, I ended up with a fishing spider.
Most of you already know about how my wife found Toby in our bathroom, so I won't elaborate
further.
However, I erroneously thought it was a wolf spider and designed the vivarium to mimic
the forests around my house where they reside.
Although this does exactly that, it was geared towards the behaviors of a wolf spider.
Unlike other fishing spiders that live waterside, dark fishers like this instead prefer forested
areas on trees.
Because of that, this would actually work long term, but it's missing something I know
it would appreciate, a water feature.
That's not something I could retroactively add, so I embarked on a journey to create
an elaborate, naturalistic creek vivarium for this incredible spider.
Going with a completely custom build again seemed like the right move.
This one, however, would have to be much larger to accommodate the water feature.
Luckily, I already had leftover Utresta shelves from the IKEA aquarium build, so I started
there.
I just had to get the side pieces, which were also Utresta, and another piece I could cut
to size.
All of the custom pieces will be the same width, which I accounted for first.
I marked the glass, aligned the guide, oiled the tool, scored a line, flipped it over,
and broke the glass accordingly.
I repeated this process horizontally to produce the back of the enclosure and the substrate
tray.
Then I buffed the sharp edges with wet sandpaper and rinsed away debris.
Now I can put this thing together.
I cleaned the edges with isopropyl alcohol to remove oil that could hinder the silicone's
ability to join glass.
I added anchoring tape as well.
It's at this point that I'd usually tape off all the edges, but you won't see any of this
so I didn't bother.
I went on to apply the silicone along the edges and assembled the pieces.
Once together, I applied the interior bead, evened it out, and allowed it to cure overnight.
The anchoring tape and cardboard could be removed the following day.
Since this is a frameless tank, it requires a self-leveling mat.
I usually use EVA foam for this, and I have many from other builds, but I had to cut them
to fit.
Something I don't think I've mentioned before is that dealing with these mats if they're
not attached is really annoying.
A little bit of silicone will ensure they stay put.
Since this setup will include water, a pump must be accounted for.
After taking measurements, I cut two pieces of glass to create a partitioned area.
However, I also needed a hole for the pump's tubing.
Easy enough.
I taped a guide on the glass to retain water, and used a diamond-tipped hole saw to drill
through.
Then I taped the pieces together, applied silicone, folded it up, and ran more silicone
along the edges.
I pressed this into the right corner of the vivarium, atop a block of wood.
While that cured, it was time to address the top of the tank.
First, I cut a thin strip of glass out of the leftovers.
After processing it accordingly, I taped spacer boards above the tray to ensure the door's
opening remains level.
I applied silicone just above these, and attached the glass.
The vivarium required a vented lid, and the easiest solution is often just to make a window
screen.
I cut the frames to the appropriate size.
Then I assembled them with corners, and laid out a fiberglass screen, which I locked in
with spline.
I applied a sloppy, yet functional bead of silicone along the top, dropped the screen
over this, and taped it down while curing.
These custom vivariums also require a bezel along the front for the door.
I made this one out of wood, which I glued and nailed together.
Like you've seen with many of my recent projects, I finished the look with show suit
gibbon.
I burnt the entire surface of the wood with a torch, and sanded off the char.
All I had to do then was apply silicone to the back, remove the spacers from before,
and clamp it in.
After curing, I could remove the clamps and clean things up.
Additionally, I removed excess screen above the pump fault, so I could work out the details
for the water feature.
I took measurements of the inside of the tank, which I'll use to create a false bottom
from a crate-like diffuser.
I accounted for the top piece first, that will define the entire shape.
These additional pieces created heightened strength after being zip-tied together with
the first.
These cross braces are especially important for support in the middle.
Since the pump fault is exposed underneath, I had to include coarse filter sponge.
This will protect the pump from debris.
With those details taken care of, I could finally move on to the scape, which will consist
of small flagstone chunks.
Well sort of.
I made a test scape to see if I could pull off my vision with these stones.
Once I felt confident that I could, I pulled everything out to address other details.
I measured the distance between the false bottom and the top, which I used to cut down
cork bark to the exact height.
I drilled a hole in the side of this one for the pump's tubing as well.
This piece hid the pump fault with ease.
I knew a background of sorts would help add to this as well.
I applied dabs of silicone to the back of cork bark sheets, which made that task a breeze.
I also had to account for a spillover area, which I didn't have enough room for.
I had to place a few of the stones in this area to get an idea of what was appropriate
and modified the false bottom accordingly.
As is though, debris would fall right through this and make it useless in no time.
To minimize the amount of particles entering this space, I covered the top with geotextile
fabric.
I secured it with zip ties and added a sheet of window screen in the same manner to account
for the sides, which I wanted to be more permeable for the sake of water flow.
Now I can finally scape for real.
I did my best to recreate the section from before and continued moving to the right.
I placed more cork as I did, and scraps of XPS foam to build height without adding excess
weight.
I'll admit that this selection of stones wasn't the best.
I don't know how well it's translated through the footage, but it took me a really long
time to craft something viable.
Eventually I did, but unfortunately, I had to dismantle it for a final time.
That was so that I could address a very important step, waterproofing the cracks between the
stones with expanding foam.
The trick was to apply as little foam as possible in the correct locations.
It's a tricky process since I'm working on a small scale, but if done correctly can be
a viable solution.
Anyway, I gradually built up height and pulling areas as I moved toward the right of the enclosure.
There was no way to test the functionality of the water flow in any of this.
I had to go slowly based on what I thought would happen.
After meticulously creating something I thought would work and adding a random elbow attachment
to the pump's tube, it was finally ready for a water test.
I had an idea of how it would run in my head, but you never truly know how these will look
until the water flows.
As with most setups like this, it's make or break.
I plugged in the pump, and this happened.
I had to adjust the return and there were a few leaky spots around the front, but it
was looking good.
I knew leaks were inevitable when I built this, but I thought ahead with the remaining
design elements.
First and foremost was the addition of more cork bark branches.
I felt they would be a great defining feature since these spiders often cling to them.
I also built up the rockwork in the spillover area as seamlessly as possible with what I've
already done.
As for the void in the front of the false bottom, I did a few things.
First I placed a filter sponge along the false bottom.
Then I added wicking fabric which will create a moss embankment later on.
To create a seamless look and weigh this down, I added a layer of gravel.
Because of the leaks and a minimized weight, I decided that lava rock was the best move
from here.
After rinsing out debris, I was able to add excellent topography to the background.
Of course, these made it possible to fill all of the void space and it doesn't really
matter how wet they get.
For the ease of building and to wick water upwards for the plants and moss, I rehydrated
sphagnum moss.
I used this to create a permeable barrier above the rocks.
It may not be as effective as fabric or mesh, but it's still a viable option.
In the foreground, I had to soften the drop off around the false bottom.
A piece of cork was a great option.
I pulled back the fabric and filled the majority of this space with lava rock, which I then
concealed with sphagnum moss.
Again, the goal was to create a surface ideal for growing moss.
Additionally, the leaking water feature will actually help with this as well.
The trick was to make everything appear as seamless as possible and intentional.
If anything looked boxy or rigid, it just wouldn't have been right.
That was essential because of how the stones look.
And I don't know about you, but I think this all resulted in a great foundation to
build from.
Of course, the details would take this all to the next level.
Roots left over from the isopod build were a great addition, especially since you often
see them around creeks.
They helped, but the plants will truly add some life.
I began with syngonium, but I knew this would look best primarily with ferns.
After all, they're probably one of the most prevalent plants you'd find in such an environment.
Although they'd likely do fine without substrate, I added a thin layer above the barrier within
the background area.
With that, I could finally add the moss.
I went outside and collected a few varieties, which I rinsed off to remove debris.
This incredible selection contains various textures and hues that will build a truly
natural aesthetic.
As you've seen thus far, I've designed all of this with moss in mind from the start.
Even before I constructed the enclosure, I knew it would include a lot, which is why
I made everything how I did.
In fact, even the rocks look water because they're sandstone.
Furthermore, I wrapped fabric around the pumps return to add more moss.
Taking a step back, you can really see things coming together.
My goal was to capture the essence and beauty of the creeks found around my area, and I
think moss was the defining feature to pull this off.
However, botanicals will add to this as well.
I made sure to leave room for them because I knew they would embellish everything.
I randomly sprinkled them throughout as it would happen in nature as well.
It was pretty much done at this point, so I could add the doors, which I made pretty
much using all of the same techniques as before.
I burnt the wood, cut the glass, and siliconed everything together.
However, once it came time to install them, I noticed a serious issue.
I realized that I must have cut the doors too small for the opening.
Needless to say, I had to make them again, which pushed everything back another day.
Let's get the spider.
Dark fishers are quite docile, and I wasn't worried about getting bit, but I had to be
careful.
I didn't want to scare the spider and have it run away and not be able to catch it.
Something else worth noting is that dark fishers are the largest fishing spider in the world,
and the second largest spider in North America.
With the spider safely tucked away, I pulled a few things out of this setup and moved them
to the new one.
These additional elements took things to the next level, as you'll see shortly.
All I had to do now was add the isopods, which were happy to explore, and of course, Toby.
Here you can see just how quick they are and why I was careful earlier.
Unsurprisingly, it immediately went to the top and behind the syngonium.
I've made countless setups in my life and shared many of those on this channel, but
I must admit that this is probably one of my favorites yet.
Are there things I would change?
Of course, there always are.
That said, I can think of very few setups where I've been able to capture a slice of
nature quite like this.
Funny enough, it's all just for a spider.
I know that's not everyone's cup of tea or the most exciting animal that could inhabit
this space, but that's kind of the point.
You may not see it all the time, but when you do, it's a pleasant surprise.
However, even without anything in sight, the design is still engaging to view, and why
not go all out?
Furthermore, these spiders only live for a few years, so I could always put something
else in here down the road.
I expect to have this one for at least another year, but possibly two.
Either way, my goal to create a naturalistic creek vivarium similar to where this animal
would be found naturally exceeded my expectations in the end.
I think it's a great way to illustrate what's possible in this medium and beautifully showcases
an animal that could be easily misunderstood.
