Design an organic chair | Modeling projects

Creative 3D objects
9 followers
Hello everybody and welcome to this furniture design tutorial in which I'm going to show you
a very easy way how to build such a complex and organic looking chair in Shapr3D. I will run you
through the whole process about first starting creating all the sketches which we need, highlighting
also Shapr's unique ability to create sketches and then move them around in 3D space which is
extremely useful. Further, a big focus of this exercise is going to how easy it is to create
actually the shell. So we'll first create a spherical body, then create the sketches,
project them onto the surfaces, shell everything so we have now a cored out part and then use a
really smart idea of using the push and pull command to simply remove the excess material
via push and pull extrude if you want to say and then of course I run you through all the rest
adding nice details to the design for example like seams so when we then bring everything
into the visualization we have appropriate amount of geometry which we can then texture and create
beautiful looking product presentations and with all that said let's do it. Let's start with a new
empty design. Before we continue we want to make sure that snapping is all turned on and we use
centimeter as our unit system. Let's go to the front view and move everything down a little bit
and we're going to create our first sketch that's going to build that spherical body.
Let's click sketch, we will start with an ellipse and on the z-axis I start drawing
straight down to define the major axis and then the minor axis. Press escape to start
drawing the ellipse. Then we specify the minor axis to be 62 centimeters and the major axis
will be 70 centimeters. Now because everything started to be drawn actually on the z-axis,
the center point has a coincident constraint on the z-axis, I can only move the ellipse straight up
which is perfect because now I can select the ellipse center point and the sketch origin
and specify the distance to be 102 centimeters. I know this value that the center has to be at
this position so when we create a seat the seat isn't too high or too low. Beautiful.
Now the next step we're going to draw a line again on the z-axis straight down starting outside
ending outside. Press escape. If you now look actually at the end points you will see that
the white dots have a dark dot inside and that is because we by drawing on the z-axis and ending
on the z-axis we coincident constraint the end points to the z-axis and that we need to delete.
So we can select these points and delete them. Beautiful. To continue we can use the trim command
and simply remove the pieces which are on top and the bottom and then we go to the move command,
select the line, select the ellipse, and we... I need to trim this one more time correctly,
and then we can rotate everything perfectly through the center of the ellipse. Look at that.
Nice and clean. 12 degrees and that is it. We have now actually the elliptical body with a perfectly
rotated center line and with that we can exit the sketch, select the sketch profile, half one,
select this line that is actually going to be our revolve axis, and then we select the
revolve command and there is actually now our spherical body. In the items view we can turn the
visibility off for this body. For the moment we don't need it anymore. Let's go to the front view
and now we're going to create a second sketch. The sketch is going to define how we are going to
cut this solid body open. We will start with this spline and the control version. Somewhere on top
we click, go in, click, go down, click, go further down, click, go on up, click, and go to the outside
and click and press escape and escape to stop the spline drawing command. We can now move these
points around and sculpt. I like the way how we would like this chair to open. One thing to note,
do not bring the spline over the ellipse or too close because this way the background will be very
skinny or non-existent. There we are. Let's say something like this. Beautiful. We can define
actually or adjust the outline of the sketch and perfect it later after we projected everything
onto the spherical body and trimmed it thanks to the history. So this does not have to be perfect.
We will add one line, maybe slightly at an angle on top. That's actually the border where on top we
trim everything off and now we are also adding where the bottom part will be opened. Let's say
like this. I make this a little bit bigger so it's easier to see. Very good. With this done,
we can exit the sketch. The first sketch we don't need to see anymore. We can now show the body and
we're going to project these sketch elements onto that spherical body. To do this, let's go to tools,
select project, then we select our three sketch elements and then select the sphere. You see the
sphere is violet and has the target sign. That's perfect. The projection result will be an edge
on the face. Click done and we can hide that sketch. There we are. You see? Perfect. This is
really good. What we can do now is clean everything up a little bit. We can select all these extra
edge bits here and delete them. So now if we go look from the side, there we can see
this is actually the chair shell we will remain and this is what we will lose.
Just to make my point, let's go back to Sketch 2 and move everything a little bit
and then there you will see how when we exit this one, everything was updated according to
how we adjusted that sketch. Perfect. Now in the next step, this is actually the fun modeling trick,
we're going to shell this body. Shell, double click the part and then go 8 centimeters to
the inside. While we are in side view, click on section view and now there we can see how we also
have these edges on the inside. We actually do not need those, so delete them. We exit section view
and then we change our view to the other side. Go to back view in this case, section view, and then we
select the other half of these projected lines and delete. Now what we can do is we can select
this area we would like to remove and then with the push and pull command we start cutting in
and minus 8 is all we need. Press enter, turn the section view off and there it is.
So you might ask yourself why did we go into the section view and the inside twice to remove the
lines? We simply helped the software this way. The inside was a clean revolve surface and the outside
that was the surface we detailed. Now to prove my point one more time, let's go back to the
sketch and here is this line and move everything a little bit around and there you can see how now
everything beautifully updates. That is the reason why I said don't worry, everything we
draw here right now does not have to be perfect. We can perfect everything after we created the
three-dimensional result. The beauty of this process of shelling and then via push and pull
removing the surface we don't need is that actually these rim surfaces we have here which
I'm selecting are all perpendicular to these other two edges. So with this done we can now go ahead
and start styling everything a little bit. These corners here I select and then I round those
to be nice and comfortable. We can in this case I used 18 centimeters. I will select this inner
edge and that's going to define the upholstery and I will go with a radius of 6 centimeters.
So later when I'm adding materials it will look like a 2 centimeter thickness for the shell
and then comes 6 centimeters of material for the fabric.
Very good. Perfect. This looks actually pretty good. We can keep everything this way. At this
point we can go ahead and start drawing the legs. I will start actually sketching kind of like the
way how I might want the legs to look. With the spline command I'm just drawing a three-point
spline kind of like a nice arc and then with the spline command from the ground up I draw a spline
up go inwards and then I go back trying to hit actually the chair and press escape and escape
and exit the sketch. The beauty of Shapr is that I can now select for example these sketch elements,
go exit, go to a bottom view and then I start rotating these sketches and move them into the
position where I want them to be. I can go to transform and move and then select the
back leg and rotate this a little bit and move this to somewhere else. Very good.
So this is like super intuitive. Now because these sketches are on a plane I can click actually the
sketch and there you can see now I'm editing the sketch on its own grid. Perfect. This looks really
great. To really know if these leg sketches are perfect I need to have a three-dimensional body
produced. So let's do that. Let's start with the front leg. Actually before we do this maybe to
make things a little bit easier I will select the back leg, exit the sketch and then I go mirror.
I do not want to keep the original and simply bring this other leg over to the other side.
So now I have both sketches on the right side.
Back to the original task. Let's select this front sketch, exit the sketch and then we will add a
plane on curve at a point. I will drag this one to the bottom and then I will select this sketch,
the back one and do exactly the same and make sure this is also at the bottom. Now with this we
created a construction plane that is perpendicular to these curves and on that construction plane
I can add a sketch. At the center point where actually this sketch intersects with the leg
sketch we add the circle 2 centimeters and then I do exactly the same also on the other construction
plane. There we are. Beautiful. Now we can select one cross-section or circle profile
and then select the according spline for the leg and perform a sweep command. Let's do the same on
the other one. You see I work very logical one step after the next step and I group them
because in the history now I also here have a visual order. I can see what I worked on. I made
the planes, I made the profile sketches and then here I created the swept bodies. Perfect.
Now I will hide this first body we created. Then the trick now to create this beautiful
fluted shape for the leg is I'm going to select the edge of the swept body, go to scale and I
want to use the uniform scale and simply scale this up and look at that. This is how easy it is
to create such a complex looking shape. So the swept command created this beautiful leg
along this kind of like S-curve and then with the scale command we change the cross-section
in a very linear way. Now we can highlight actually or show the first body again and
the scale command is captured here. We can then go back to the scale command and click on it
and adjust those to play with this a little bit more. It's pretty cool because these sketches
can be freely moved around. We can go ahead and I will go to the bottom view. I need to figure out
which sketch is this one. That is the correct one. Click exit sketch and when I move this
sketch plane around and rotate it, you see everything follows. This is just fantastic.
Here the way how I modified this made actually the leg not 100% go into the base
and now I adjusted that thanks to the amazing history. Beautiful. Very good.
We can now double click and select these two bodies and then we make a copy via the mirror
command to the other side because now we can go ahead and say these legs together with this shell
reunion together. One piece. Now we have these new edges which we can then fillet.
I fillet actually the front and the back individually so I have a little bit more
of a control if one fillet should be bigger and one fillet for example should be smaller.
Perfect. This looks really good. I'm going to clean up my scene a little bit
to make selecting elements easier. I am selecting all the sketches and then put them
onto one sketch and this way everything is nicely in one folder and I can simply show and hide that
folder and through that show and hide all the pieces inside instead of just selecting piece by
piece. The legs are kind of nearly done. We have these rounded or rounded ends,
look like a flat surface but I would like this to be more spherical end.
So I left click to the right side, simply select then the edges and can zoom in a little bit,
fillet this. I do this so it's nearly a sphere and it has a small flat surface. Very good.
Because we're onto these surfaces later in the visu, we can then add another material.
To add a little bit more of realism and modeling finish, we can select these edges which are
outside of what should be the shell and then add a tiny fillet. I would like this to be
0.5 of a centimeter, should be not too big. And to have a nice transition between the fabric
surfaces and then the plastic shell surface, I'm going to add a little bit of a seam along
these edges. In Shapr3D, just go to a side view, then we go to Sketch and you see that actually
wherever we have these edges of our body intersecting with the sketch plane, we get
intersection snapping points. And onto there, let's create a circle 1 centimeter. Then we can
select the circle sketch profile, select the sweep path elements and then perform a sweep command.
There we are. Now it's a tiny detail, but this actually, when we add materials, really adds
quite a lot of nice realism. Such a chair also needs an ottoman. So let's quickly build an
ottoman. I go to a side view, turn on section view, because now I can see roughly where my
hip would be, where my legs come out. That is perfect. I will go to the sketch. I will on the
X-axis draw a horizontal line, one line straight up and press escape, escape, double click everything,
make sure it's horizontal vertical. Then I will use the arc command, click and click,
and make another arc and click and escape. The first arc, the top one, there I would like the
arc to be tangent, sorry, not tangent, perpendicular to this line. And we can do this by
adding a 90 degree angle constraint between the line and the arc. What we can then do is,
as you can see, play with kind of like the shape of these arcs. And that will, if we go ahead
outside the sketch, create then a revolve body, we can play on basically how we would like this to look.
Now, for example, the top is a little bit thicker. We can bring this over, now the top is a little
bit thinner. We can bring the lower part in, so we have a nice, not too big proportion. This looks
pretty good. Beautiful. Section view off, there we are. We can round the lower one, quite big.
And then the top one, we round too. To make this look quite nice, a little bit more like fabric,
we can play with the tangency weight here a little bit. Push this up, because there's like foam inside
and we just press it over it. Very good. And in a similar way, how we created that seam
on our first piece, we're going to do the same on the second piece. But let me show a fun trick.
We are selecting the sketch and then all the features that define this ottoman, and then we
move this in front of the sketch that created the seam. So now the ottoman is created before
we built the seam, because now inside the same sketch, when we select it, we can simply add
the seam here to the ottoman. And then we do the same thing. Select the sketch profile,
select the circular part, do a sweep body. Since this is circular, we could also have selected
the axis and did a revolve command. There we are. Very good. Now we're ready to add materials.
Let's go to the visual. First, let's make this look quite nice. We'll go to gradient mood,
click on the cog. We will rotate this a little bit to, in this case, 55. So I get a nice drop
shadow onto the piece. And then for the background color, we select the standard
cyan color and go to the center in the color field to make this less strong. Great.
Click done. Then let's go to materials. The standard material, let's say it should be a nice
glossy ABS. We can just drag this onto it. Click the material. We make this white there.
And now we can select on the ottoman the top three surfaces for the upholstery. We click change,
and then we go to fabric, and I will select the wool material. Actually on the felt. Let's go
with the felt and drag it onto it. Very good. We can play with the scale a little bit and make
this on purpose a little bit bigger so it's easier to see. And then I will give this this nice
cyan color. So it pops nicely. To colorize now the rest of the chair, we can go ahead and select
all the individual faces we need. There we are. The seam and everything for the chair,
where we have the fabric. And we're nearly done. And then click on change and select the felt
material. There we are. This one was not selected. This one too. And I must have selected here
the wrong surface. There. Beautiful. There we are. Everything is nearly done. Maybe just the base,
so the tip of our legs. From the left to the right side, I select and then go in face mode.
Here I go change. I go to plastic, scroll down. I would like this to be a silicone rubber.
In terms of color material and finish, I will go with this cyan color again,
but then go more to the darker tone. Now this is on the ground. That's going to be dirty.
But I don't want this to be too black. It should actually go with the rest. Very good.
And ladies and gentlemen, we are done. This is how easy it is to build
such a complex looking piece of furniture in Shapr3D.
