How to make bonsai with taper and ramification

Bonsai Artistry
5 followers
I love autumn when the trees start going into dormancy because that's the time we can work on
them. So I'm going to show you what we do with our beech trees. These beech trees have been growing
here for the last 15 years or more. Some of them were already about half an inch thick and about a
meter tall but we cut them down and they have had training for five to ten years and it does take a
while to get a good tree. So I'll show you the next stage as to what we do with these trees.
Some of them are large some of them are small but we'll take some into the back greenhouse
and I'll show you the next stage of development. So let's continue. I've brought the beech from
outside the nursery into our workshop where we do the videos and we have four three seven of them.
I may bring one more to show you examples. The beauty of our nursery is that we have so much
material that I can show you so many things. We don't just have one. So let's start and see where
we go. So this program today is covering two topics. How to make good taper because taper is
all important in bonsai because if you don't have good taper the tree just looks chopped
and then how to produce ramification. Taper and ramification are terms which are banded around
but not many people really understand it and even fewer people understand how to create it but there
is a way of doing it. It does involve a bit of patience but it can be done. So let's look at
taper to begin with. Now looking at each of them in turn let's get some of these out of the way.
This one here let me get it out of the pot and you can see the roots as well.
These have been growing in these flower pots for the last three years and then what I did three
years ago was to chop the top off. This tree was about a meter tall. I chopped it down to about 30
centimeter and where I chopped it a new shoot grew and that is what we call the new leader
and that is what creates the taper. So that was cut three years ago and this branch here was cut
only last year so that I've got another taper going up there. So if you keep doing it this is
how you get taper. Now I will now cut it there and then that will stop it growing from the side
and that will continue to grow. I'm not in a rush to cut this off because the longer I make it grow
the stronger this shoot gets and the taper will be better. So you can see this is a very good
taper. This blends into that and all you need to do at this stage is the next topic is the
ramification. The more you tip the ends of the shoots as simple as that. Tip all the ends without
cutting hard back and by tipping it you're going to force the side shoots to go. You can do a little
bit of wiring. I can show you how to improve this and if we just get some of this. I'm not going to
waste time looking for scrap wire because that's what I usually do and we will show you how we can
start getting the branches to move in the direction that we want to. I'm not taking the wire right to
end. I'm just doing very loose wiring because it's only to guide the branch in a certain direction
that I want. Because I have so many trees I can't do them all but what I can do I will do.
We literally have hundreds of these trees and not only grown in pots we also grow some of
them in the ground and while they're growing in the ground we do exactly the same thing
to encourage good taper. So again the basic design is the triangular shape. Now this branch needs
to be brought this way to create the triangle. If I don't bring it that way it goes that way
the triangle is not so prominent. So let me again to save wire. I don't like waste.
So very roughly we are not doing a finished tree. The tree is still in training so we're just
guiding the branch in the correct direction. You can do sophisticated wiring but while we are
growing these trees in the field who's going to look at it you know. So that is the basic shape
we've got for that tree. So that's quite nice like that. So taper and ramification in one go.
Let's look at each of these trees in turn to give you some ideas to how we deal with each of them.
Of course growing them in flower pots restricts the growth to a large extent so they don't grow
so fast. So this tree again rather than to grow it at that angle. Remember what I showed you in
another video where I'm talking of planting things at the correct angle because the angle
of planting makes a big difference to the look of the tree. So with this tree I could take it out
in spring and plant it in a plastic training pot and let it grow in this direction. So again if you
come closer you'll see that is where the cut was made three years ago and you can just let it rot.
I'm not too worried. You see how it's callusing. Callusing means the new growth that comes to
cover the old scar and if you use a Venn cutter or a hybrid cutter to carve away the
taper will get even better and the callus will heal over much smoother. So just by cutting that
you see the new leader has grown so that will grow in that direction. Earlier this year I cut
over there so it's grown in this direction and if I don't want it to grow any taller I can cut it
there to make the taper go that way. So this I will reduce a little bit. Again I can,
this is almost a saleable tree with bits of wire. Wire these, bring them around so this has become
even better. Again tip all the ends so that we will end up like that you know with a nice
back branch. I've got to make sure I get more of a conical shape. There you go. So that is
the second one done. We'll go through all of them because we have so many. As I always say
repetition is very very important. You learn just by repeating the process. So this one,
now you can see these are all, you won't believe it, the same age tree. Some of them are thicker
than others. It's hard to believe that this and this is the same age. I don't know why that is so.
It's like human beings. Some grow big, some grow small. So that's where I cut. You see that was
cut. This was probably cut only like a couple of years ago. That's died now. So that is the
new leader growing. So that's growing that way. Now I could again have a choice if I want that
to be the leader to get movement. I could do that and make this the new leader. So this is a very
simple tree or if you didn't want to you can grow it up that way and have the tree growing upright
with the tree like that. So there's so many options. So this again is a very
credible looking bonsai. So the more you tip it, more branches will come there. So you'll get more
ramification. So that is number three done. Let's go through all of them in turn. Some are more
difficult than others. So this one here. Now this one is a rather weird one. You can see it's got
like a double head. Now some people may criticize it and say oh you shouldn't be doing that having
two heads. But it looks quite nice. Don't forget that in bonsai you're trying to create trees that
look natural. Don't forget that you're always trying to copy or replicate nature. The more
you can replicate nature, the more natural the tree looks. So the tree is more convincing. If you
make it look too artificial, too plastic for want of a better term, the tree will not look so nice.
So even the tree like that with that funny candelabra type style is quite convincing as
bonsai. I would probably leave it. You know someone will want to buy it. There is one fault here. If
you notice that the roots are very high. Where you get a situation like this, you can either tuck a
rock underneath there to make it look like a false root over rock. Or if you didn't want to, you can
plant it deeper over there to let the root go there. So I could do that when I plant it in the spring,
plant it at that level. And if I cut it off there, the bottom part, this part will become a small tree
like so. So you can do that. In fact, I will do that in preparation because there's enough
root there to sustain the tree. So if you just cut it there, it will grow into a nice short
broom style tree. But perhaps when I come to repotting, I'll remind you again because I'll
revert to this tree again. So that is number four. Now let's look at another tricky one.
Now this one is also quite interesting. So this is very interesting. So it's interesting because
it's been distressed. Look at the roots, weird roots. And it's got a bit of a scar there,
which is all quite nice. I could probably take that off, I don't know, and just plant it a bit
deeper. That is rather odd there. Or I could make a feature, but I wouldn't rush to do it just yet.
Now this tree is funny because it's going that way. And this is rather straight. So what do we
do? We could do a better taper. See this is crying out to be the new leader. And this is very
straight. So that is not much use. So what I will do is I will take that off. I'll just use the
wend cutter or the hybrid cutter to show you what I mean about getting a better taper.
So let me show you this tool. We call this a wend cutter. Some people call it the knob cutter. I
don't like the term. But wend cutter is completely round. There's also a tool called the hybrid
cutter, which is like a cross between a branch cutter, concave branch cutter, and the wend
cutter. But the wend cutter is the traditional tool for gouging the tree. That means you get
deep into the wood. And when the bark heals over what we call callus, it will heal over that
concave part. You see how efficient this tool is. These, by the way, are some of our Heron's
branded tools made in China. You see that's how you use the wend cutter. And that will heal over
you can use some cut paste. With large cuts, you can use cut paste. But sometimes deciduous
trees just heal themselves. So that's how I make the new taper. And you see, I'm not going to rush
to cut this off because the longer I leave this to pull, the thicker this will get. So this will
blend quicker. Ideally, at some stage, I can cut it down to there so the tree won't be so tall.
But I'm going to let this grow because as it grows and pulls the sap, this will make it thicker. I
get a better taper. I can then decide what to take off from there. If it causes inverse taper,
which it might do, then I might take it off. So let's bite the bullet, as they say. That may
become another tree. So I'm not rushing to take that off. And then I can also do this with the
wend cutter. I can do this. So these are all just general principles that you may or may not know.
So that heals well. So you'll get a nice smooth thing. So I've eliminated that bad inverse taper
growing at that point. So I can see something else. I can cut some more. So I get a better
taper there. So that's how you make the taper. All right. So this is the other one. And let's
move on to yet another one because we have seven examples. So this is a good example of
a good taper. So you see what we've done here. If you come close, again, as I say,
this was cut three years ago, but I cut it there and another shoot grew there.
So I've got to decide whether I want two or not. Probably not because it looks odd with two heads
there. That's a case where it certainly shouldn't be there. So let me cut that off. So let me show
you what I'm about to do. So when you come to cutting a brush, this is just over an inch thick.
There are several tools you can use. You can either use this, what we call the silky saw.
This is a very effective tool. We've used this for years. Very, very sharp. It cuts almost like
butter. So that's one option. The other option we have, I don't know whether you can buy this,
but we get this in the UK. And this is a very effective long handle lock. So there's a lot
of leverage. So you can simply with this, cut it off like that. So that's another option. Very
effective. And then of course, my favourite tool at the moment is the small mini chainsaw. So the
mini chainsaw is effective as well. So there you are. So you cut it. You see it's already dead in
there. And again, if you go around with your wind cutter or knob cutter, you can pare down the side
and you'll get a very smooth healing effect over there. So again, this could be the new leader
there, but I'm not in a rush to cut this off because the longer I leave it, the stronger this
gets. So I get a better taper quicker. So I will let this grow instead of cutting it off. There's
always a temptation to cut it there, but the longer you leave it, the quicker this will thicken
and you will get a much better taper. So that is what I will do with this one. So not touching the
top. So this way you've got to be a bit patient. So the last of the seven that we have here,
this again is a rather weird one and it's almost like a natural broom style. It's standing to make
two leaders, as you can see from here. And it's rather congested, but for my money, I would
probably leave it. See, this is rotting away naturally over there. Far too often, I feel that
many people try to make their trees so perfect that they look almost plastic. Because trees
do grow in nature like this, I would love to make this a rather unconventional type of broom tree.
But because there's so much ramification, the ramification has been developed simply by
constantly, constantly cutting. So if I were to do no more than this, this is what I would do.
If you keep doing this throughout the year, as the tree grows, and this will make a nice broom
style tree. Anyone would give their right arm for it. You can do a bit of wiring to arrange the
branches, but if that back leader does annoy you, you can consider taking it off. In fact, what I
might do, you can see how it's forked over here. I might just do this. If it annoys anyone who's
watching the video, I'll do that. Okay, it becomes less prominent. So this has become a rather
natural looking broom style. So that is how I would deal with this. Nothing more than that.
And one final tree, I'll go to the field and bring it back on a wheelbarrow and show you
another tree that we've achieved in just three years. So this is another beech that I
created the leader three years ago, but it was a much larger tree. So we put it in this large
plastic training pot, and we just left it in our growing fields to grow in the pot.
You can see everything is so lush here that the weeds grow as strong as the trees.
No matter, that's not a problem. The roots are quite interesting, and you see it's been damaged
here by some scarring, maybe the moor got there. And although I planted it this way, the front
could really be here. So you see how the taper has been developed in the last three years,
and where it's been callousing, I can improve it by taking more of this dead off.
And if I take the dead off, the callous will heal over the wood even better. I don't want to spend
ages showing you this because it's not the purpose of the exercise. So you know what I mean to do
this. And where you get a lump, if you like it, keep it. If you don't like it, again with the
So that is what the wind cutter does. But some people like these knobbly bits. Even that,
if you didn't like, you can get rid of that. And if you wanted even better taper, you can
cut all that off. You see, I haven't got around to it, but this is what you need to do.
But when it callouses, it'll knock off the dead wood. It will eventually, nature has its own way,
and the dead bits will be pushed away. So that will be the future apex. Again,
if I didn't want it to go so tall, I can cut it off there and make the taper go in that direction.
In fact, I might just do that. So rather than keep letting it get too tall, I can do this.
So this is a constant refining process. We assess it as we go along. So this tree,
apart from the cut I made three years ago, has been growing on the nursery of maybe like
10 or 12 years. And in 10 or 12 years, this tree is nowhere near ready to sell yet.
So that is how I developed that one. And if I didn't want this bit, I can probably knock this
off. Something else I would like to point out, if you leave too many branches growing at one point,
you get what is called inverse taper, because all the energies go back into that part,
and it swells this portion. So you can get that inverse taper effect. So I might,
but then you see, if I wanted to look further, I can even make that into a future leader. Whoever
buys this tree, they may want to do that, this bit as a leader, and keep it as a short tree,
and then get rid of this branch. So there's so many options. I don't usually like to foreclose
the options, because I've got to remind myself that it's not me who's going to have these trees
eventually. Whoever buys these trees, they like to put their own stamp on it. So they may want to
do their own thing. But for my money at the moment, the tree is going to go in that direction.
And that is how the tree will eventually look with this as the front.
So this is a much larger version compared to some of these. And I dare say that these would have
been just a couple of years older than these, because they were grown in the ground for a long
time to thicken it. So I hope you've learned a little bit about ramification and creating taper
from this video. So I hope you've enjoyed this one.
