🛠️ How to open Dell Precision 3591 - disassembly and upgrade options

LaptopMedia
183 followers
12 Video Views·Nov 29, 2024
hello this is Nick from laptop media and
today we will show you how to open the
Dell Precision
3591 to see the internals of this
workstation you have to undo eight
captive Phillips head screws pry the two
zones around the hinges with a lever
tool
when that is done the whole rear should
be popped if not fully pry it with a
thin plastic tool alongside the sides
and the
front the device that we bought is
equipped with the optional 97w battery
the default version is a 64w hour model
to remove it unplug the connector by
pulling it straight upwards while
holding the rubber handle on top and
undo the four Phillips head screws that
secure the unit fixed to the chassis the
capacity is enough for around 12 hours
and a half of video playback our test
was conducted with the energy saver
preset activated in the windows power
and Battery menu and the optimized mode
applied in the Dell Optimizer
app e
according to Dell the two sodim FIT up
to 64 GB of
ddr5 5,600 MHz Ram in dual Channel mode
however since the CPU can support up to
96 GB this laptop likely wouldn't have
issues running a larger amount of memory
than the official manufacturer specified
limit in terms of storage upgrades there
are two m.2 slots for 2230 or 2280 gen
four ssds the left one is covered with a
metal plate that is held in place by two
screws
The Shield houses two thermal pads on
its bottom
side the system nvme Drive is installed
in the right slot and there are no
dedicated cooling pads for it which is a
questionable decision by the
manufacturer the replaceable Wi-Fi 6E
card is positioned on top of the ram
slots and the w w slot for optional LTE
or 5G connectivity is on the left the
thermal system comprises a sizable fan a
pair of long heat pipes shared between
the CPU and the GPU a heat sink on the
right and two heat spreaders
