Bonsaify | Bringing Life to Twisty Juniper Lifelines!

Bonsai Ideas
277 followers
3 Video Views·Nov 29, 2024
What's up everyone. Today we're going to take a look at this, I don't know, seven, eight year old
juniper and look at some of the problems that I have unintentionally created with the lifeline
and how to resolve them. All right, so I folded over the lip of the fabric pot and now I'm going
to kind of try to rotate this so we can see into the nooks and crannies of this tree. As you can
see it's pretty convoluted so the entire lifeline is on is on the outside of this turn here but then
as it goes from here and twists up around the side and then back down into here it's widening
a little bit and then it gets into this area where the trunk kind of doubles back on itself.
So I need to get into here which I've already done a little bit in the past but as you can see that
the space in there is closing up so I want to take off some of that lifeline but I also need
to take into account what is the design of the tree going to be ultimately and which parts of
the lifeline do I want to prioritize in terms of growing. Before we go any further let's just take
a second to orient you to the part of the process that we're in in terms of looking at this juniper
the main topic for this video. Now you might be saying to yourself where would I even get a juniper
like that and the answer to that is you wouldn't. You would generally need to do it yourself. So the process
up to this point has been to start from a cutting. This is an Itoagawa and the juniper in the rest of
the video is a Kishu but the process is the same. We have a video on the channel about doing juniper
cutting propagation then from this you would wire using whatever type of wire you want
and importantly you would be putting not only movement into these long whips but also twisting
them so that the lifeline doesn't just go up one side of the curve. Once you've done that you would
set it aside and let it grow out for a couple of years and end up with something like this.
Once you get to here you would then have the opportunity to start creating some
gin and shari on the trunk in order to start changing the shape of the trunk like we've seen
in that example that I started with. Now all of this is sort of the result of repetition,
repetitive work and different types of work at different times. So if you want more details on
that we actually have a full e-course on creating junipers like this on Bunsify.com. Check it out
if you want all of the details on getting to the point that we're at in the rest of this video.
And now let's get back to the primary example. So I want to I want to clear out this section
but I also want to be cognizant that as that lifeline continues up over this curve there
appears to be some additional movement in the lifeline as in it's kind of twisting down around
this curve and over into this section that's sort of behind it. And so I want to see if I can
save the portion of the lifeline that is kind of right on the top and outside here essentially
removing this edge in order to clean up this valley area and then removing some on the other
side or what would be the other side if there had been bark removed already to really kind of make
this into a lifeline instead of what it is becoming right now which is a large bulge.
Okay so having cleaned up this portion and I killed off this little branch here I now want to
take this edge of the lifeline and turn it back like this going around the side here and coming
back up over back in here. Now I haven't really taken this very far so I'm going to try to pull
up a big piece of bark in order to give myself a clear pathway and really delineate the the twisting
motion rather than just having this continue to make a ball of wood. So now hopefully I've
cleared out this section here. If we come around to this side you can see that I cleared out this
section as well. So this lifeline is coming down this side and then wrapping around there.
It's always a little bit tricky in these tight kind of situations to actually see what's going
on and understand the lifeline. All right and now looking at the opposite side of that turn I had to
come in here and dig out kind of almost all the sapwood and bark from this turn to make it look
more interesting and less likely to turn into just a big knot. So in doing that I have some conflicting
lifeline stuff going on here already. What I think is happening is the lifeline on the top here
is flowing around down to here. That's connecting up with this kind of in a v-shape down here.
Meanwhile the lifeline that's underneath here actually goes to that branch that's now in the
back and then splits off onto this lower section. So usually I don't have any problems with
dieback when I do these sorts of operations incrementally but we'll see what happens.
Usually it takes a month or more before you know if there's going to be any damage from the lifeline
work that you did. All right so just a little bit of lifeline deconfliction. Hopefully that will
work out well. I should say the other work that could happen at this time with this tree is to
continue wiring and doing some additional sort of bending and twisting. There's a lot of core
wood in here already because it's been wired two or three times that had has good movement in it
but if I did ultimately decide I wanted this to be a larger composition I would need to
have more of these sacrifice branches being wired so that I could use them as deadwood later.
That wraps up this video. Thank you so much for watching. We'll see you next time.
