RARE Medieval LONGSWORD from Oakeshott's Records of the Medieval Sword

Ancient Swords
6 followers
4 Video Views·Nov 27, 2024
A rare late-medieval longsword featured in Oakeshott's Records of the Medieval Swords examined in my hands.
I'm here today at William Wallace Auctioneers
and I'm looking at some very special lots,
which I'm gonna share with you.
And this first one that I'm gonna show you
is something which, if you're an owner
of Records of the Medieval Sword by Ewert Oakeshott,
you might recognize.
But hopefully you're gonna get a better look at it now,
together with some stats.
And it is this wonderful, late 15th century,
perhaps early 16th century, longsword.
Hi folks, I'm Matt Easton of Scholar Gladiatoria.
Now, first up, thanks a lot to William Wallace
for letting me come and film today.
I contacted them because I noticed some things
in their upcoming auction,
which is on the 27th and 28th of November, 2024.
I'm afraid if that date is in the past,
when you see this video, the auction's already happened.
But if you're seeing this before that date,
then it's your chance to bid on maybe this.
Now, this is a wonderful, late 15th century longsword.
And this caught my eye as soon as I saw it
in the auction catalog,
because I immediately recognized it
from Ewert Oakeshott's Records of the Medieval Sword.
Incidentally, if you don't own that book,
you absolutely must if you like medieval swords.
It is one of the bibles of medieval swords
and documents a lot of the medieval swords
which are currently in major collections,
private and public, today.
Now, looking at Ewert Oakeshott's
Records of the Medieval Sword,
we see one photograph of this and some measurements.
Now, the first thing I'm going to address
at the very beginning of this
is that you have to take some of the measurements
when it comes to length or weight or things like that
in Records of the Medieval Sword,
unfortunately, with a pinch of salt.
And this is no exception.
Over the years, I've managed to document,
measure and handle a number of swords
which are in Records of the Medieval Sword.
And unfortunately, Ewert's amazing gift
that he gave to the world with all of his books
wasn't that precise with measurements, unfortunately.
So I think in Records of the Medieval Sword,
he says that the blade of this is about 35 inches long.
He even gives it in centimeters, I think, as well,
but actually it's 31 centimeters long.
So at the outset, we have to say
that this isn't exactly as it is recorded
in Records of the Medieval Sword,
but I'm going to give you all of the measurements
in this video, so hang with me for that.
It's actually a little bit shorter than that.
And it is therefore a fairly short, long sword.
So while it does have a two-handed grip,
we'll talk about the grip in a minute,
it's actually not a very long sword.
It's probably more what we would term a bastard sword
or a hand-and-a-half sword.
So it's not a big two-hander,
even though if you just saw a picture on a page,
you might think this was a big two-handed sword.
I can tell you it's not.
The length of the blade is about the same
as an arming sword.
It just happens to have a long grip.
So this is a sword that would be eminently capable
of being worn at your side, in armor, in civilian life,
quite convenient to wear.
So where does it come from?
Possibly German.
We're not really sure.
Now, the first thing to say is
this is an unusual form of blade.
You will notice, and we'll look a bit more detail
in a second, but you'll notice
that this blade has multiple fullers,
and this is what Hewitt Oakeshott,
in his typology, put as his type 20.
So it's a multifaceted, should we say, surface.
It's even more than a hexagonal section,
which we encounter quite often, actually,
in medieval swords.
This is one, two, three, four, five facets on each side.
So you could say, rather than having six faces,
this has 10.
I'm not even sure what shape that makes this.
Actually, it's the fullers in a second.
So an interesting detail about this sword is,
two very interesting things, apart from the blade,
which is quite unusual, is the grip.
Hewitt Oakeshott believed that to be the original grip.
I actually have no particular reason to doubt him,
and one of the reasons is, if we look down here
on the meeting, the junction between the grip and the guard,
you will see some leather overlapping on the guard here.
And Hewitt Oakeshott talks about this in his book,
and he considers that part of a rain guard,
as they're commonly known.
In other words, a flap or covering of leather,
which comes down over the guard,
and probably originally projected down
below the guard to here.
This is most famously seen on some swords from Munich,
and that might mean that this is a German sword,
because that was a particularly German feature, firstly.
So, on the other side of the grip,
we don't have as much of the leather remaining,
but there is an interesting detail.
If we just look at the center of the guard for a second,
just around here, again, Oakeshott noted
that it's quite rough and unfinished here,
which might suggest that the person who made the guard
was also the same person who made the grip,
and the leather was designed to cover that section,
and therefore they didn't finish this midsection.
They finished the quillons, or arms, of the guard out here,
but they didn't polish and file smooth that center section,
because that was gonna be covered by this leather,
the leather of the grip,
which comes down and forms a rain guard.
That rain guard forms a bit of a tube,
and when it goes into the scabbard,
the scabbard comes up inside that tube,
therefore keeping the blade watertight
and safe from the elements,
hence the name rain guard or rain flap.
Right, so the grip is a waisted design.
You'll notice it has risers in the middle.
The risers are intended to keep your right hand,
or your dominant hand, you might be left-handed, in place,
so that your hand, when you're holding the sword one-handed,
for example, on horseback,
your hand doesn't slide down when you swing the sword.
So the, as is common on many long swords,
the widest portion of the blade is in the center.
So it's a waisted grip, essentially.
Quite typical, and you'll notice it has these ridged,
ridged features here,
which are representative probably of cord
on the wood underneath.
So it's a wooden grip with cord,
then leather over the top,
and then stitched down the side here.
So another really characteristic
and interesting thing about this sword
are these three recesses on the face here.
Now, if you look in Yur Tokshot's book,
Records of the Medieval Sword,
this is, there's a black and white photo,
and it's quite fuzzy and not very clear.
You can't, for example, very clearly see the detail
of the guard, which we'll look at in a second,
but you can see these three recesses
because they're very, very prominent and very deep.
But there's only three of them.
I think when I first saw the photo of that sword,
I assumed that these recesses went all the way around,
but they do not.
And moreover, this pommel very clearly
has a front and a back.
If we look at it that way,
you can see it's actually smooth on the back,
and then the facets are predominantly on the front.
Now, what do I mean by front and back?
Well, in fact, we know this was a right-handed person
who bought this sword,
or rather it was made for a right-handed person
for two reasons.
One, a right-handed person wears the sword on the left.
Now, if we put that there,
that faces outwards, okay?
But secondly, if we hold the sword here,
the general convention is that the guard curls in
at the front and out at the back.
If we were left-handed, that would be the wrong way around.
Anyway, back to the pommel.
So it is a asymmetrical pommel, as you can see here,
with cool incised lines,
but they are not symmetrical, as you can see.
So the facets are on the front,
and it's smooth on the back,
obviously because your friends and your peers
and your superiors would marvel at the detail
and decorative expense that you'd gone to
on the outside of your pommel when you were wearing it,
but they wouldn't be able to see the inside.
This is actually quite a common feature we find
with later sideswords and rapiers,
where the decoration is predominantly,
or sometimes entirely, on the outside,
and it's smooth on the inside.
But also, from a sort of functional point of view,
having a smooth inside is more comfortable against your body
and less likely to wear holes in your valuable clothes.
So the pommel, asymmetrical, designed for show.
What are those recesses for?
I can hear, I can literally hear
some of you guessing right now.
So you at Oakshot's guess was that there used to be
little figures inside here,
perhaps made of silver or gold and therefore robbed out.
I don't know.
It's very, very difficult to say
because there's nothing inside here
which really gives any clue
to there being anything attached at any time.
So it's possible there were figures in there.
Very difficult to say.
It's possible those were filled.
Maybe there was enamel in there.
There's nothing there now.
There's no stippling.
There's no attachment points.
I don't know.
It's possible they were always hollow.
It's impossible to say.
Right, onto the guard.
So the guard is known as an S guard
or essentially reversed S curled round quillons each side.
And as mentioned, when you're holding it
in your dominant hand, in my case, right hand,
most people would have been right-handed and still are,
curling to the inside line on the front
and to the outside line,
protecting the wrist and forearm on the back.
So it has a function we use to be curved like that, okay?
Also, if you're wearing it, that makes more sense
because against your body,
the rear quillon will now be curling away from the body
instead of into the body.
If it was curling in this way,
it would just keep digging in your ribs.
Whereas the front quillon,
which will be in front of your body,
that can curl inwards and it's out of the way.
It doesn't matter.
Right, okay.
So before we get onto the stats,
we're gonna talk about this blade cross section.
So as mentioned, it does have 10 facets, sort of.
So it's really quite complicated, this blade,
hence Oakshot putting it into this quite late number
in his typology, type 20.
So we start off with essentially a blade
that's almost, if you imagine, lozenge shaped
or perhaps sort of flattened diamond shape,
but then it has a fuller in the center, okay?
So let's come up close.
You'll notice it has a fuller in the center going up here
and that carries on all the way up until here, okay?
But either side of that center one are two other fullers,
okay, above and below here.
And then you've got the bevels for the cutting edge.
Now, when we get to this point,
which is some distance down the blade,
it then transitions into only having just these outer two
and that center one fades out.
Now, funnily enough, this, by pure coincidence,
is very similar to a cinquedea
that you will have seen featured on my channel
in the Royal Armouries.
And in fact, last week,
I was handling this cinquedea at the Royal Armouries
and it actually has a similar treatment
of that goes from three fullers down to two.
So it's a similar situation to this,
except in that case, it's further down the blade down here.
In terms of the overall silhouette, however,
so if we ignore the fullers,
we could say this is very similar to an Oakshot Type 18.
So if we're looking at this
from the functional point of view
of this is just a sword for fighting with,
then actually, functionally,
this is very similar to an Oakshot Type 18.
And you wouldn't really notice any difference in use.
Really, the Type 20 group is only to take account
of the fact that they have these multiple fullers.
Now, if we come back to the origin for a second,
so on one hand, we've got some information
about the hilt with the leather flap,
which might indicate a Munich or a Germany
and a Bavarian or German origin for this sword.
In terms of the S quillons,
that is a feature we find quite often
on a number of German swords.
So you could say that the grip and the guard
are pointing towards a German origin.
The pommel could be found in a number of places.
We can find those in England, France, Italy, all over.
So it's quite a common overall shape of sense stopper pommel.
These three facets don't really have a strong parallel
as far as I know in any of the other documented swords.
However, if we come to the blade,
in my opinion, we've only got one maker's mark,
which might give us a potential clue down here,
which is a little star just there, you can see that.
But apart from that mark, I can't see any others.
There's no running wolf of Passau or anything like that.
So my opinion is that it's possible this blade is Italian
based on the multiple fullering,
which is a feature we see at the end of the 15th century
in Italy and early 16th century,
most famously on Cinque Terre,
but we do also find it on arming swords
and long swords like this.
So my guess, and this is only a guess,
would be that it's an Italian exported blade,
probably from Milan or Brescia,
hilted, possibly in Germany,
could also potentially be Scandinavia,
Southern Scandinavian.
So there we go.
In terms of dating, really actually quite difficult to date.
I would probably say the end of the 15th century.
So late 1400s, possibly just edging into the early 1500s.
But it's an absolutely wonderful sword.
Now, I know that some of you are absolutely
going to know the stats of this bad boy.
So let's have a look at some of the numbers.
So first of all, the total length is 105.5 centimeters.
This is all gonna be a metric, by the way.
The blade length, contrary to what you at Oakshop wrote,
it's actually about 10 centimeters shorter
than what he put.
The length of the blade is 79 centimeters,
which is about 31 inches.
It's quite short for a long sword.
However, it's quite heavy.
We'll get to the weight in a second.
The fuller in the center, some of you might be wondering,
is 49 centimeters long.
The length of the grip that I'm holding here
is 20 centimeters, and the length of the whole hilt
is 26.5 centimeters.
I'm not gonna give all of the measurements
because it might get too boring for you.
I know some of you will want to know
about the distal taper.
Now, this is an interesting topic.
So this is the way that the blade starts off thicker here
and gets thinner down here.
Now, since I've been doing these videos
and doing this documentation,
I have found that some swords
either have more distal taper than you might think
or have less distal taper than you might think.
Some swords have barely any distal taper at all.
So don't believe anyone who gives sweeping statements
about distal taper on medieval swords
because it varies.
But this one actually has a fair amount of distal taper.
It is 8.6 millimeters thick at the base.
So 8.6 millimeters,
which is actually quite typical for a long sword.
Perhaps, yeah, it's about typical, I would say.
So 8.6 millimeters.
Then if we come down to the middle,
it is about 4.9 millimeters.
Okay, so that's a big reduction from 8.6 down to 4.9.
And then three centimeters from the tip,
it is 3.9 millimeters, sorry.
So we've gone from 8.6 millimeters,
4.9 millimeters to 3.9 millimeters.
Now, there's a couple of things to say there.
Firstly, that's not immensely thin up here, okay?
So 3.9 millimeters is still quite thick.
And this is therefore a stiff blade.
It starts off very thick,
but it's still fairly thick at the middle
and really doesn't get that thin at the tip.
But there is another detail
which you have to be aware of with this sword,
and that is it has a reinforced tip.
So just before that, it comes down to 3.9 millimeters,
but then it slightly swells at the tip.
Now, that's an important detail for a couple of reasons.
One, it tells us that that is the real tip.
This isn't a reduced blade
because it wouldn't get thicker then.
It would stay thin.
So very unlikely that this was a longer blade
that's been cut down, in my opinion.
It could potentially have been shortened from the back end,
but then we've got issues around the dating of the hilt.
So reinforced tip, that's the first thing.
Secondly, why would you have a reinforced tip?
Well, I've covered this in multiple videos
looking at both medieval swords,
but also things like Indian, Qatar punch daggers.
It's to deal with armor.
So this is a sword which is intended to go against armor.
That means it's unlikely
that it's primarily intended for civilian wear.
It probably is a battlefield sword,
the kind of sword that you would wear in armor,
use in armor, and fight against armor.
Reinforced tip, of course, has two main purposes.
One, to punch through mail or chain mail
at the voiders, the gaps in the armor.
But also, if you do happen to hit plate with it
while you're half-swording,
it's less likely to break the tip off
because it's been reinforced.
So the final measurements for you,
the guard from tip to tip measured in a straight line,
obviously it's an S curve,
but if you measure it this way, it's 21 centimeters.
The point of balance, interestingly,
is 7 1⁄2 centimeters.
Quite typical, actually, for a sword like this.
And the weight is 1,610 grams, 1-6-1-0 grams.
So it's actually quite heavy.
For an arming sword, that would be really quite heavy.
For a long sword, it's not too bad.
Overall, in terms of how this,
the impression I get in handling this,
it's quite small for a long sword, and it's quite heavy.
So in my opinion, this is a sword
which is really made for battlefield use,
wearing an armor, using against armor.
This is the sort of sword that could have been carried
at somewhere like the Battle of Bosworth
if it was in England,
but I think that this is probably a continental sword
that would have been carried probably somewhere in Germany,
Switzerland, Austria, somewhere like this.
But it is a martial sword, I believe.
So this is the sort of sword that you'd wear at your side
as a backup to the lance on horseback
or the poleaxe or the spear on foot.
And it's a good battlefield fighting sword.
There's nothing fancy about it.
There's no decoration on the blade.
There's no gilding.
There's no engraving that we might find at this time.
The grip, I think, is original.
You at Oakshot certainly thought it was original,
and it's wonderful to see and grip it.
I mean, if it's not the original grip,
then why would it have the remainders
of the rain flaps there
and the clear evidence on the guard
showing that it probably was covered?
I think he's right.
I think it is the original grip.
So it's an amazing, wonderful sword.
And I have to thank William Wallace
for letting me get my hands on this
and letting me measure it,
because, of course, this is a sword
which many of us know from records
of the medieval sword by you at Oakshot.
It's a wonderful piece, amazing sword,
wonderful survival, beautiful condition,
and it's legendary also
because it's been published as well.
So it's really great to actually find out
the real accurate data for this thing
and to hold it.
What an honor.
Anyway, thanks a lot for watching.
I hope you've enjoyed this.
I hope this has been a good sword
to finally be able to see
and see better images of
than you would have had in you at Oakshot's book.
And I hope I'll see you back on the channel really soon.
And also remember to check out the auction catalog
for William Wallace's upcoming sale
on the 27th and 28th of November down below.
You can find a link to that there.
Anyway, thanks a lot for watching.
Cheers, folks.
Thanks for watching.
We've got extra videos on Patreon.
Please give our Facebook a like
and subscribe if you haven't already.
Cheers, folks.
