Ultimate PlayStation Classic Mod - I Put A Raspberry Pi In It!
What's going on guys? CTA Prime back here again. Today I just wanted to show you my
modded PlayStation Classic. Now there are mods out there. There's Bleem Sync.
There's Auto Bleem and things like that and theoretically on paper the hardware
that comes in the PS Classic from the factory has more power than the Raspberry
Pi. But the Raspberry Pi has the backing of literally hundreds of developers and
retro gaming on the Pi has come a long way since the very first one was
released. And it just happens that the Raspberry Pi can run PlayStation 1
games really really well and there's lots of tweaks you can do to make it
even run better. You can add shaders. You can add scan lines. There's all kinds of
stuff you can do to this and frankly I kind of got tired of waiting around for
Retro Flag to finish up their PlayStation 1 case so I picked up an
extra PS Classic to go ahead and mod it out. Now the internals of the Classic
will still work it's just not gonna be in this case here and if I wanted to I
could actually put it back in here. No hot glue was used whatsoever in this
build. I'm gonna show you that in a second but first I want to get into a
little bit of gameplay here. Now as you can see I'm using DualShock 4
controllers or PlayStation 4 controllers and they're connected to the Raspberry
Pi that's inside of here through Bluetooth. I have both of them configured
one player and two player. I could add more if I had more PS4 controllers but
unfortunately I only have two. The front USBs are functional. I also added a power
button with a safe shutdown script and I have the LED right in place where it
needs to be on the PlayStation Classics case. If you can solder this mod can
actually be done in about 20 minutes. It's really easy to do as long as you're
using that Raspberry Pi 3a plus. You could put a B plus in here but you're
gonna need an HDMI extender and there's just not a lot of room in here but the
A plus does a really good job with most of the stuff I want to run. I just skipped
ahead a little bit here. I am using the PCSX Rearm Core in RetroPie and I do
need to remap this controller because it's a little off. It's really easy to do
that though. I didn't even think about it before I started filming. The theme I'm
using for RetroPie is Nostalgia. It's available on the ES themes menu. There's
a bunch of themes you can choose from if you don't like to look at that one and
that's really one of the big reasons everybody loves the Raspberry Pi and
RetroPie. Tons of customizations.
So if you're new to the Raspberry Pi, I have a ton of tutorials. If there's
something you need to know about the Raspberry Pi and RetroPie, go to Google,
type in ETA Prime and then the question you want to ask and 99% of the time
you'll find a video from me. Over the years I've tested a lot of PlayStation
1 games on the Raspberry Pi 2 all the way up to the 3A plus that I'm running
in here and everything that I've tested runs really well. You might run into a
few games that are a bit slow here and there but there are tweaks you can do
inside of RetroPie or RetroArch to get them running at full speed. Real quick I
just wanted to show you the LED and the power button here. It's gonna turn the
system off and in about 10 seconds the LED will go off. So let's go ahead and take
a look at how I have this thing set up. Now if you really want a tutorial, I can
make one but it does require soldering. Like I said, no hot glue was used
whatsoever in this build. I did have to use some super glue here and there but I
think it looks pretty good. Now the main reason I use the Raspberry Pi 3A plus is
because the HDMI lines up directly with the HDMI on the PlayStation Classics
case and it fits right in here. Raspberry Pi 3 just won't fit like this. I did have
to fabricate a little splitter for these USBs but they slide right into the
PlayStation Classics USB port holders and they fit pretty snug so you won't
have to use any glue. These were just female USB adapters that I had laying
around. I actually bought them from the dollar store. I clipped the ends off and
I fabricated a little splitter to go into the single USB port on the A plus. I
also had to add a female micro USB adapter to send power to the pads on the
back of the Pi. I also added an LED and a momentary switch here. The Pi itself is
held in by these two screws. The HDMI sits so perfect in here. All I needed
were those two standoffs and I just super glued them to the inside of the
case and that's pretty much it. I mean it's actually really simple to set
something like this up. If I was you I wouldn't run out and buy one of these
for 50 bucks just to put a Pi in it. Eventually somebody's gonna come out
with a case that looks just like this and hopefully it's retro flag because in
the past they've come out with some of the best retro style console cases for
the Pi that I've ever seen. They have the Mega Drive, the SNES, and the NES and what
I've heard through the grapevine is PS1 is next but we never know how long it's
gonna be. If you absolutely have to do something like this I'm gonna leave
links in the description to everything I used to make this even the PlayStation
Classic you can get everything on Amazon. And if there's a big enough demand I
will do a tutorial video on this. I actually have enough to make one more of
these so if you're interested in seeing a tutorial or learning how to do this
let me know in the comments below. It's actually a fun little weekend project
and if you're good with a soldering iron you can put this all together in 30
minutes or less. That's pretty much it for this video guys really appreciate
you watching. If you have any questions let me know and like always thanks for

