How to Knit the Cinnabar Button Scarf

DIY Crafts & Art
164 followers
Hi everyone, it's Jennifer from FiberFlux.
In this video, I will show you how to knit the Cinnabar Button Scarf.
This is an easy two-row lace pattern, and you can use the buttons to close it up and
make an infinity scarf.
You can also unbutton the scarf and wear it as a traditional scarf, or you can wrap it
around your neck a few times and make a cowl.
So it's a very versatile piece that you can wear all winter long.
For this project, you'll need your yarn.
I used about a skein and a half of the Hometown USA by Lion Brand, and that comes in the Tampa
Spice colorway.
You'll also need a set of 10mm US 15 straight needles, a pair of scissors, and a tapestry
needle to finish up weaving the ends and sewing your buttons.
You'll also need two buttons.
When selecting your buttons, because this piece doesn't have buttonholes per se, it
uses the decorative lace holes to connect it together.
You want to make sure that your button can pass through the lace holes without any problem.
You want to make sure that your buttons are large enough to not fall through the holes,
but small enough to pass comfortably through the holes.
So to begin, get some of our yarn out here, and like I said before, this is just a two-row
lace pattern, so it's really good if you want just a quick and easy pattern, or if you're
learning how to knit lace, this is a really good starter pattern for lace.
We'll start by putting a slip knot on our knitting needle, and I'm going to use the
long tail cast on.
You can really use any cast on you prefer, and we'll just put a slip knot on our knitting
needle, and then we'll start with row 1 after we cast on.
So when you put a slip knot on here, this counts as a stitch, so we're going to cast
on 16, so that's 1-2-3, and you'll want to do this fairly loosely, 4-5-6-7-8-9-10-11-12-13-14-15-16.
You'll have a little tail here, you can just weave that in later.
So after we've cast on our stitches, I always like to go back and double check my cast on,
just to make sure I've cast on the needed number of stitches.
So 1-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16.
You can do this if you want to, or not, I just like to double check, just to make sure.
So we'll pull out a little more yarn, and then we're going to start with row 1.
To work row 1, you'll knit the first stitch, and then you'll work a yarn over.
To work a yarn over, just wrap the yarn around your right needle, just like that, and that's
a very simple increase, that'll add a stitch.
Next you're going to knit 2 together.
To knit 2 together, insert your needle into 2 stitches, and then knit as you normally
would, and that is a very simple decrease.
Just give this a tug here, to show you.
So now I have 3 stitches on your right needle.
We're going to continue in this sequence, all the way across the row, until we have
1 stitch left.
So we're going to yarn over, knit 2 together, and sometimes when you're knitting the first
row, things can be a little bit snug, and that's okay, that first row is usually a little
snug when you cast on, so just try and cast on as loose as you can.
Some people even like to cast on using a larger needle, and then they'll later switch back
to start that first row, but that's a personal preference, if you find that helps you, then
definitely go for it.
So we're just working a yarn over, knit 2 together, yarn over, knit 2 together, yarn
over, knit 2 together, and now we have 1 stitch left on our needle, we're just going to knit
that.
So this is Row 1 complete, of our Cinnabar Scarf, next we're going to flip our work and
begin Row 2.
To work Row 2, we're going to purl the first stitch.
I'm going to slide my yarn over a little, so purl 1, then we're going to work it the
same way as Row 1, but in reverse, so I'm just pulling out some yarn here.
So purl 1, and then we're going to yarn over, and then purl 2.
Purl 2 is worked pretty much the same way as the knit 2 together, I'm sorry, purl 2
together.
So we're going to insert the needle like this instead, wrap the yarn around the needle,
and purl together.
Just like that, so you should have 1, 2, 3 stitches on your needle.
Yarn over, purl 2 together, yarn over, purl 2 together, yarn over, purl 2 together, yarn
over, purl 2 together, yarn over, purl 2 together, yarn over, purl 2 together, until you have
1 stitch left on your needle.
and then we're just going to purl the last stitch. So let's put our, these are
gigantic metal noisy needles we have here this morning. So row one and two is
complete. You can just kind of check out your work as you go along. I also like to
kind of spot check as I'm knitting and just every so often just count the
number of stitches on my needle just to make sure I'm on track because when you
knit lace it builds on itself. So when you are off a little things can get a
little crooked. So I just like to kind of spot check every several rows just to make
sure I still have 16 on my needle. So to finish your cinnabar scarf you're just
going to keep working rows one and two. I didn't mention this before but row one is
the right side of your work where you work the knit stitches. Row two is the
wrong side of your work where you're going to be purling the stitches. So to
finish your scarf you'll just keep working rows one and two all the way
across until you get the length that you like. The finished cinnabar scarf that I
made came out to be about six inches wide and I made mine 42 inches long.
However you can keep going if you like and make yours extra long and use the
full two skeins. I used again one and a half skeins of this yarn. So you just keep
going until you get to the desired length. When you're finished you can take your
tapestry needle and weave in the ends and I can show you really quickly too how to
bind off. We'll just bind off what we've done so far. To bind off I did my bind off
on the right side of the work because I did my bind off using knit stitches. If
you prefer to bind off on the wrong side where you purl just do purl stitches
instead. But to bind off knit one stitch then knit another stitch. This is a basic
bind off. There's other ways but we're just going to do a basic bind off. So we
have two stitches on our needle. Just take your other needle and lift this
stitch up over that stitch just like that. Let's do that again. Knit so you
have two on your needle then lift the stitch over just like that. You just keep
doing that all the way across until you have one stitch left on your knitting
needle and then you can just fasten that off. So here we've done a few here and
I'll show you what we have done so far. So here we've bound off and you can see
it's starting to come off of the needle. You'll just keep doing that until you
have one stitch left and then you'll just break the yarn and fasten it off.
We'll get that out of the way and then once you weave in the ends you can sew
your buttons on and again make sure your buttons can pass through these lacy
holes. I just used a matching piece of yarn to sew mine on and that's it.
That's how you make the Cinnabar button scarf. Thanks so much for watching and be
sure and click the red subscribe button to get all the latest Fiberflux video
updates. Thanks again!
