Notation Guide

Liberty Sky Music
33 followers
Hello, everybody. This is Dr. Meyer here with a video for you on notation and writing a manuscript,
a topic that you might already know a lot about. However, if you don't have a notation software
like Sibelius or Finale or some of the free online notation softwares, you may have to
write music by hand, like maybe in your assignments in music theory class. So just in case you're not
a master music editor, I want to go over a few common errors and guidelines to help you avoid
mistakes in your written manuscripts. Let's get started. The first error commonly made is not
placing the clef properly on the staff. A clef is of utmost importance, as we would never know
which notes belong on which line or space without one. That said, you must always designate a clef
at the beginning of every line or system of music. Let's get started with the treble clef or G clef.
This designation is important to know to properly write the clef on the staff. That is the little
swirl in the middle of the clef designates which line is to be read as G. In our conception of
treble clef, the second line from the bottom is read as G, so your notations should reflect that
as well. While the other elements of the treble clef can be left up to artistic interpretation,
the swirl in the middle must circle the second line from the bottom to be a true
treble clef. Another clef often used is the bass clef or the F clef. Just like the G clef,
a certain element of the clef sign designates the F line. The two dots on the right hand side
of the bass clef surrounding the second line from the top should be read as F. Again, you may
interpret the hook portion of the clef artistically, but the two dots must surround the line to be read
as F. The last most commonly used clef is a movable clef that designates the C line on the staff.
The center of the C clef, which looks kind of like a number three, designates the line on which we
read the note C. The most common placement for these clefs are on the center line and the second
from the top, and they are called the alto and tenor clefs, respectively. The C clef is found
on every line of the staff, but you will mostly encounter the alto clef and tenor clef in your
assignments, or if you play the viola or other string instruments that use these clefs. One
mistake that people often make is the placement of note heads on the staff. Your note head should
be a somewhat oblong oval and be centered on the line or space where you intend to place the note.
A note head which is too small is difficult to read, and a note head which is too big is
ambiguous in terms of the note you're intending. As pictured, the note heads for the G are centered
on the G line, but don't take up too much space so as to be ambiguous. The whole note A here fills
the entire space of the A space but does not go outside of the space. One semi-unrelated note here.
The dotted note dot, which is placed behind the note head here, will always reside in a space.
So make sure that if your note head is on a line that the dot is in the space above that note here
as indicated on this G. Accidentals have a very specific placement on the staff in order to be
read correctly. First, accidentals always come before the note head. If you place the accidental
behind the note, you'll be making a notation mistake. Second, each symbol has a little window
in which you will put on the line or space of the note name to be altered by the accidental.
See the window here inside of the natural sharp and flat signs? Compare these to the symbols on
the staff above to verify that each is written correctly. Also note that these symbols are
sized appropriately. That is, not too big or not too small, but clearly notated to indicate a change
to the written pitch. Some musicians are unsure which direction to put the stem of a note on the
staff. Thankfully, there are a few easy rules to remember the direction. If the note head is above
the center line of the staff, the stem goes down. If the note head is below the center line,
the stem will point up. As for note heads on the center line of the staff, they almost always will
go down, except for when the surrounding stems are also pointing up. So, you'll sort of keep
everyone pointing the same direction as in the last measure of this example here. These stem
rules will be altered when we are writing in four-part harmony. So, each voice has a specific
stem direction in four-part harmony. So, make sure that you are making a note that these rules are for
single line melodies only. As for how long to draw your stem, the stem length should only be
one octave in length. That is, if your note is C on the second line from the top of the staff,
just like the first note in our example, you should draw your stem down to where middle C
would be located in the staff, that being one octave in length. Now that you know about where
to place note heads, their accidentals, and their stems, let's talk a little bit about spacing.
Spacing is important to make your manuscript legible for your reader. Spacing doesn't just
apply to individual measures, but for groups of measures and systems, and even whole pages, if
your piece ends up being that long. In the above example, the notes on the top line are too far
apart, and in the bottom line, they're too close together. So, these two lines are a little too
difficult to read, and will make your manuscript look messy. A better solution are evenly spaced
notes, which are based on the length of each rhythm. For example, the half note takes up the
most space in this measure, because it's the longest in duration. The 16th notes are closer
together, because they're shorter. This line is much easier to read than the other two, and will
make a neater manuscript. Now, it will take some time to practice writing the spacing of your note
heads, so don't get discouraged if your manuscript doesn't turn out perfectly the first few times
that you are writing. Beaming is a topic which could have its own video, but we'll discuss it
briefly here. Notes must be beamed according to the meter, in order to show each beat, or occasionally
group of strong and weak beats. In simple meter, beats are divided into two subdivisions. So, in
3-4 time, you can only beam two eighth notes together, or four 16th notes together. In the
above example, observe how the right beaming shows each of the three beats clearly. One, two, three.
And the wrong beaming obscures beats two and three with incorrect beaming. As a player, it's much
easier to read the right side of this example. Similarly, in compound meter, the beat is
subdivided into three pulses. So, you may beam three note heads together, unlike in simple meter.
Make sure that each of the beats are clearly notated with your beaming. In this example,
each of the beats are clearly legible with the current beaming. You may feel tempted to beam
together the two eighth notes here, but they are part of two different beats, and must be flagged
separately in order to notate the meter clearly. Lastly, here are a couple of general musical
manuscript items to check before you submit your work. Make sure your time signature is
written properly, with the correct numbers on the top, and the correct numbers on the bottom.
As well as your key signatures, these must be on the proper lines and spaces in each clef. Musical
symbols convey a lot of information, but if they are written improperly, you or your reader may not
be able to successfully perform your music. These include dynamic markings, accent or other
articulation markings, tempos, slurs, ties, etc. The list goes on. The more you read and learn, the more
familiar you will become with the convention of all musical markings, so don't get overwhelmed.
Lastly, for handwritten and computer generated manuscripts, I highly recommend that you double
triple check your spacing of your systems and pages, so there are no extra or empty measures
hanging out at the end of the system or the page. As I grade assignments, I will take off points for
poor manuscript care on this point specifically, but on these others as well. Now it's your turn
to practice. There are five notation errors in this example. Pause the video now if you need more
time to find all the errors. Here are the errors you should have found for this example. The treble
clef is not centered around the second line from the bottom to indicate G in its proper spot, so
it needs to be shifted down a little bit. The time signature is upside down, that the six should be
on the top and the eight should be on the bottom, not eight six. That's not even a time signature.
The sharp sign here in front of the B is one space too low. It needs to be moved up onto the line
right in the window to create B sharp. The second measure here, this G, the stem of the note
falls below the center line, so it should be pointed up instead of down. Lastly, the fermata
sign at the end is upside down. If the sign were below the staff, it would look like this,
but it is above, so it needs to have the dot on the bottom of the symbol. Here's what we learned
in this video. We learned that there are several manuscript errors that could be made when writing
our own music. Here's what we need to look out for. The clefs must be placed on the correct line
in order to indicate the right pitches for each clef. Note heads should be sized properly and
placed on the correct line or space in a small slanted oval. Accidentals must be placed before
the note head and on the corresponding line or space of the note to be altered. Stems have a
specific pointing direction depending on the location of the note head. Up for below the middle
line and down for above the middle line. Pay careful attention to the spacing of notes and
measures within your manuscript for ease of reading and playing. Beaming of note stems must
reflect the meter, whether simple or compound. A few other items which need careful consideration
are key signatures, time signatures, and other musical symbols such as the fermata that was upside
down in our example. That's all for now. Good luck writing your own clean and properly notated
musical manuscripts. I look forward to seeing them. Thanks for watching!
