❄️WINTER DECOR IDEAS | After Christmas Decorating Ideas | Winter Decor 2022

Cheap and easy decorating tips
92 followers
Today I'm creating some simple winter DIYs and decorating a few areas in my home for the after
Christmas winter season. Hey there my name is Yami, I am your Latina next door. Welcome back
to mi casa where I love to share high-end home decor and DIYs on a budget as well as extreme
before and after room transformations. After the Christmas season is over and we begin to take
down our Christmas decorations, our homes can feel a little empty and a little bland. So it's
nice to add a few touches of winter decor throughout so we can continue enjoying the
winter months and enjoy nice winter decor for the season. So this is what I'm sharing with you today.
I love changing up my wreaths on my front door and I had these two wire wreath frames that you
can get at your local dollar store and one of them happened to fit right inside the other so
I thought I'd join them together using very small zip ties. One of them was just going to be too thin
for this look. After the zip ties were secured I cut off the excess pieces. Since this wreath was
going to be white I went ahead and spray painted it with some leftover spray paint that I had in
my stash and I did both the front and the back of it. For the next step I got this thick yarn
that I bought at Hobby Lobby and it was on sale for 30% off so it was just under five dollars.
Next you're going to take three pieces that you pre-measured and you're going to tape them down
and create a braid. When you measure these out to cut them for length you're going to want to
wrap them around your wreath and then wrap them over a little bit more onto itself about a fourth
of the way as indicated by the red arrows. Now the reason you have to add a little bit more is
because when you braid them you will actually shrink the length and it might not be as long
as you need it if you don't add a little bit extra to those yarn pieces. Once you're finished with
your braid you're going to want to lay on top of the wreath. I started on the exterior of it
and I worked my way inward. Now I did one line at a time and I simply applied hot glue on small
sections of the wire wreath and pressed the yarn down on top of it. When I reached the other end I
make sure that the end pieces are nice and braided down then I hot glue it as close as possible to
the other end and cut off any excess and just tuck those end pieces downward and inward and hot glue
the two pieces together. Because the yarn is so fluffy you can barely even tell that that's the end
piece. Next you're going to do the same thing with the next braid. Now because I wanted some different
texture I decided to go in the opposite direction of the braid so that you have one going one way
one another way and then the final one on the inside will be going the same direction as the
outer braid. Once the second one is done you can start on your third and as you can see three braids
around this form wreath is the perfect size to cover the entire wire form and you'll only need
one roll of this yarn if you wish to do something like this yourself with some yarn left over.
I knew I wanted some winter greenery and I picked up these picks at Hobby Lobby on clearance from
their after Christmas sale and I thought these would be perfect. You can either buy something
like this or you can actually use anything that you have remaining from your Christmas stash.
And what I like to do before I glue anything down is kind of lay it out on my wreath to make sure
that everything looks nice and then I start to hot glue it. Now here I have just a mixture of pine
with pine cones as well as some really shiny eucalyptus leaves. Now I don't need that long
pick stem so I just took some wire cutters and I cut them down and then using some hot glue I
adhered them onto the wreath. Now because you are hot gluing it onto the yarn portion of the wreath
it is good to add hot glue on several areas of the pick and it kind of helps keep them in place
not only on the wreath but it also allows you to kind of form them the way you want them to
show on your wreath. So it'll give you a chance to open up the leaves open up the branches and
keep them in place. Next I had some ribbon that I had left over from last spring and because of the
neutral burlap and the white stripes I thought it would be perfect for this. I didn't have enough
to make a large bow so I do end up creating a burlap bow for the back of it to give it a little
bit more presence on the wreath that way it doesn't look too small. And then I simply attach the bows
onto the wreath with some hot glue and because the wire is on the back side of the yarn you don't
need to add anything additional in order to hang it. This is pretty much it for this one.
And for this next DIY you're just going to use some leftover fuzzy fabric whether it's faux fur
fabric or the little white washcloth that you can find at your local Dollar Tree.
Now this DIY is perfect when you want to add a seasonal touch to candle holders or vases that
you may have in your home. Now what you see me doing here is cutting it into a large five inch
wide piece because this is going to go around a fairly large seagrass vase. Now I did put it up
against the vase and see that it was a little bit too wide so I went ahead and cut it down to
three inches in width and this looked much better. And so once I was happy I wrapped it around and
hot glued the two end pieces together and as you can see this isn't anything that's permanent
so you can change up the looks of any vase for the winter time as often as you like. In order
to coordinate with my wreath I thought I'd add a strip of burlap and place it on top of the white
furry fabric and then I hot glued a couple of sprigs from those picks that I used on my wreath
were left over and that was it for this DIY. For this next DIY I'm going to be using these pillow
cases that I bought at Hobby Lobby for 50% off so each of these was $2.75. You can't beat that.
Usually I make my own but this was totally worth it to buy them pre-made. Next I'll be using some
of this heavy duty ribbon that I also got for 50% off at Hobby Lobby. It's not really ribbon per se
it's more like those handles that you get on inexpensive burlap sacks and it was perfect for
this I thought. And next I began to create the snowflake form on the front of the pillow cover
and I wasn't following any type of pattern I was just kind of free handing this
and just making the little end pieces of the snowflake. Now I did end up making the actual
pattern of the snowflake on the pillow cushion a little bit smaller than what you see here.
Now whenever I create custom pillow cushion covers I always sew them however these were
already pre-made and it was going to be a little bit hard to get the pillow cushion open and fitted
through the sleeve of my sewing machine and then adhering all of these so I decided to use
some fabric glue for this. Not hot glue, fabric glue. And so as you saw I started with the base
pieces of the snowflake and then I began to add the smaller little pieces at the ends.
Each snowflake pillow cover only cost four dollars to make because I already had that fabric glue
left over. All you do is let the glue dry and your pillow covers are complete. And don't forget to
like this video if you are enjoying it and subscribe so that you too can become part of the familia.
For this next DIY I'm going to be making over this little stand. I made this a few years ago in my
last house for another video and all I did was put together a wood round and an unfinished wood
candlestick from Michael's, glued them together and painted them. I don't use buffalo check too
much in my decor and honestly I hadn't been using this little stand for a while so I thought I would
make it a little bit more useful and pair it up with one of my cloches from Ikea. As you saw I
started by sanding down the paint finish to get it nice and smooth and then I ordered these half
round wood beads from Amazon and I'll link to them below. I love them because these come in so many
different sizes and you can apply them on so many different things. I placed them all around the top
to make sure that I had enough of the half beads to go all the way around but I did plan on putting
them on the exterior of the wood round not on the top and I did end up needing to have more anyways
because those are two different measurements. For this stand I'm going to be using Debbie's
Design Diaries Sandy Blonde DIY paint. Now if you've never heard of this type of paint this is
actually a clay based paint with only nine ingredients, no VOCs, no acrylic or latex in it.
It really does give a super nice finish to all your projects and it is highly pigmented.
In most cases for a little project like this usually one coat is enough. I did go back just a
little bit and add a little bit more paint in some areas to make sure that I got absolutely
every nook and crevice. Next in order to seal the piece I used some of Debbie's clear wax. I love
this wax. This is pretty much the only wax I ever use on any of my projects and it's no odor. It
goes on so smooth and it's really buttery and soft unlike most waxes and as a matter of fact I got to
meet Debbie this past month. It was so fun to finally get to meet her in person. She's been
inspiring me for quite a while here on YouTube and it was nice to actually get to see her in action
and create something live at a workshop last month and I also got to meet Dion over at the
Turquoise Iris who is one of the most amazing furniture artists you will ever meet. Definitely
check these ladies out on YouTube if you have not done so already and stay tuned for some possible
announcements and fun surprises in the future. I'll have their channels in my description box
but as you can see here the wax brings out that color's richness and just deepens it
so beautifully and I made sure to do every single corner of the stand. Now I get asked all the time
why I use a wax. Not only does it enrich in the color because these colors do tend to dry
kind of light and matte but it also protects your surface and you want that because you don't want
to ever damage your paint job and maybe even reactivate the paint if anything liquid gets
dropped on it. Next what I'm using is some of Debbie's White Decrepit Dust. I have never used
before and I've been wanting to because I had an idea of the finish that I wanted for this little
stand and basically you just sprinkle the dust all over your piece that you are painting. The wax still
has to be a little tacky and what it does is it gets gathered in all of the nooks and crevices
and as you see here I'm just applying it with a brush and later on I'll wipe it back to remove
the excess. So after I was done with the Decrepit Dust I decided to add a little bit more dimension
by adding some white wax and started filling in a little bit of the crevices and nooks and
also in between the beads. After that I wiped it off and then I set it to dry.
I did the same thing with this wooden ornament from Dollar Tree because I had a smaller cloche.
This time I added larger beads around the perimeter. I went in with the same Sandy Blonde
for this one but this time after adding the White Decrepit I thought I would change things up a
little bit and add some of the Dark Decrepit just to see what kind of look it would give the paint.
Adding the Dark Decrepit Dust does give it a darker more grayish look. For inside the cloches
I just made simple little cone Christmas trees in the same way that I made the ones for my
Christmas tree in my dining room. These are so simple to make with poster board and any yarn
that you have on hand. For this next project you'll need a little bit of greenery, a faux candle,
maybe even some ribbon, and some lanterns that you probably have around your home.
With the changing of the seasons we always want something new and fresh to decorate our homes
but in order to keep costs down sometimes a little change like this is all you need in order to add
a little bit of seasonal decor. In this instance I'm using birch ribbon and I'm just going to wrap
it around these faux Dollar Tree candles that I've had for quite some time and I'm going to add
some greenery left over from my Christmas picks and honestly that's all there is to it.
And for this next one I'm going to be sharing a simple way to decorate your dining table for
winter. I love clear glass candle holders and I think they're timeless and I found these in Hobby
Lobby's Christmas Clearance. Now even though these are from their Christmas collection they are
simple and can be used all winter long. Now I do have an option from Dollar Tree if you cannot
find these. I love a lambs ear for spring but it can also be used for winter since it has that
fuzzy white texture all over the leaves. Now these glass candle holders are from Dollar Tree
and I actually love the way they look. They're a brand new candle holder, I hadn't seen them before
and they have a beautiful shape. Plus the bottom of it is hollowed out and you can use it as a
shot glass whenever you're not using it as a candle holder. I'm just saying. So I thought I
would share these on the table and because these are much smaller I went ahead and used five instead
of three. You can spray paint these any color you want but I personally think that crystal clear
they look absolutely gorgeous. So that is the final DIY. I hope you enjoyed each and every one
of these. Please make sure to hit like if you enjoyed this video and let me know in the comments
below which one of these was your favorite. As always, I hope you're well and I hope to see you
next week with another home decor and DIY video. Until then, adios!
