Beginners Wolf Wood Carving with a Dremel Rotary Tool - Tutorial

Nghệ thuật chạm khắc gỗ
6 followers
Good morning, making a little wolf today. This block of red heart, it's a two by four by four.
I didn't want to draw the design so I printed it out on both sides, taped it. I'm going to start
out with using a tile cutting bit to score around it so that the design is on the wood and I can get
rid of this paper. I'm then going to go into power drill and I'm going to drill holes to get rid of
this big chunk of wood here because it's a little much to tackle with just the Dremel.
All right, here we are. So where we started with the outline, cut it, got some space between the
back legs, space between the front legs, narrowed it down a little bit, got the tail, it's going to
the side. Now I'm going to start rounding the body. I'm going to cut a lot of this out, probably
into here like this. Then after I've done that, I'm going to hit the corners and start rounding.
All right, we're slightly round. I think this is far too wide for what I'm going for, so
I put some lines, center line for reference. I'm just going to narrow the body,
narrow the nose, start to shape the ears.
All right, I think I've rounded and shaped it as much as I want to.
So now I've also done these ears. I'm going to just finish it up,
sand it really well with the sanding drum first, and then I'm going to move in with some
buffing wheels such as this. I'll probably sign my name on the bottom because I'm doing it as a gift.
A thousand grit. I think it is good to oil, so I'm going to use teak oil.
Oil on the cloth. I'm actually really excited to see the color because it should look really nice.
This is a redwood, red heart, if I failed to mention that before.
Really just a deep color because it's much lighter.
So I'm just going to put a very little, sort of just let it soak for a little while,
add a second coat, and then we'll be done. It's all done. Pretty happy with this.
There's a little beetle hole that runs through here that I couldn't sand out.
But overall, I think the grain looks really nice, how it lined up here with the front.
If you like this video, I'll be posting a couple more soon. Thanks for watching.
