Navigating The World of Trumpet Mouthpieces

Learning Trumpet
5 followers
#Education #music # instruments # Trumpet # Orchestra # instrument demonstration
This is one of the areas of trumpet playing that we are all interested in and many of us are
looking for the magic mouthpiece or the holy grail. Basically, it doesn't take a genius to
realize that there are compromises with mouthpiece selection. Keep in mind, of course, that individuals
are all different and one mouthpiece that might work well for one player is not necessarily going
to work fantastically for another player. One of the big questions, though, is how do you go about
choosing a mouthpiece and what are we looking for? As a young student, you will probably play a
mouthpiece that's a middle-sized mouthpiece, both diameter and cup. For obvious reasons, it's a good
place to start until the young player has had a few lessons or even a few weeks under his or her
belt. And a younger player, of course, will have to have developed enough ability to be able to
try a mouthpiece with some consistency to it. But not to get off the track, why or what do we do
to find a mouthpiece that suits us well? Remember the criterion are how does the mouthpiece sound?
What is the timbre and the color? More so, how does it feel? And is it appropriate for the music that
you want to play? And is it helping you at all? It would be naive to think that most of us wouldn't
gravitate toward something in the middle ranges of the, away from the extremes of mouthpiece size,
small and large, both in diameter and in cup size. I do think, and I will just come right out with it
strongly as I usually do, that most mouthpieces in the range of a Bach one, one and a quarter,
one and a half, are too big to be efficient for most players. There's a lot of disagreement there
because of the history of orchestral playing and use with C trumpet for sure, but a bit smaller
mouthpiece can really help with efficiency and endurance and somewhat range too. Now when I say
the following, which is, I think people should play the smallest mouthpiece they can play well
with the sound that they want to have and the correct sound for the job in quotations.
While this is true, a lot of people misinterpret that to be, you should play a tiny mouthpiece,
which is not true. Some people will, some people won't. Again, most of us should play a mouthpiece
that helps us to play better. My mouthpiece is a long-term developed product that had little tiny
changes made to it over a long period of time. When I left the Eastman School of Music, I had an
opportunity to play in the San Antonio Symphony as first trumpet or to go on the road with a big band
called the Woody Herman Thundering Herd, quite well known at the time. I chose to do the jazz
band on the road and begin to experiment with mouthpieces that were a little bit smaller than
I'd been playing before. For obvious reasons, the sound character of a big band is totally
different than an orchestra, etc. And playing B-flat trumpet. So I had noticed that I liked to play,
at the time I was experimenting with Shilke products because it was more accessible from
where I was and there was no such thing as Amazon Prime to take care of that kind of shipping and
I noticed that the Shilke 13 diameter, and these numbers are random, they're just associated with
the manufacturer, they don't cross compared to any other manufacturers, unfortunately.
The Shilke 13 was really narrow and the Shilke 14 was really wide compared to my comfort zone.
I did much better with the 14 diameter. So I looked up the measurements for these mouthpieces
and I asked them to make me a mouthpiece that was halfway in between these two in diameter
and had one of their cups that was called an A cup, which was their shallower cup,
but it wasn't that shallow in terms of space. There was a lot of room on the side.
And I only mentioned that specific because I wasn't interested in breaking glass and tearing
sheet metal with my sound and I never have been. The mouthpiece that came out of that I used on
the road quite a long time was just a one-off custom. It had its shortcomings and its challenges
in terms of intonation inconsistencies and the bottom of the mouthpiece was just Shilke standard
sizes, which refers to the fact that all mouthpiece manufacturers have their own tools
which are different and they come up with different backbores, which is the bottom part
of the mouthpiece, and they come up with different shapes for going from the throat, which is the
bottom of the cup, into the backbore. They have different shapes inside there that really affect
the intonation and the feel of the mouthpiece and the openness or the resistance that can happen
because a lot of players do enjoy some resistance. They don't just want a totally open feeling.
They're able to balance playing better while creating volume and playing softly and things
like that are more manageable than just a wide open mouthpiece. When I was traveling on the road
to different cities then, I would go to different mouthpiece makers in these cities and have them
copy the mouthpiece that I was playing because there was no computer lather, anything that was
really consistent between the manufacturing of these different makers and the mouthpiece would
turn out differently or slightly differently and if it played better I would just switch right there
which happened quite a few times. I had the Schilke mouthpiece and then a Giardinelli from
New York which I played quite a long time. Now when I go back to it actually it's not a great
mouthpiece for me anyway. Now I had Bob Reeves in Los Angeles make a mouthpiece and Evolution
happened, Yamaha I played for a long time was very very close to this one which is a Peter Pickett
mouthpiece. Now I am a Yamaha artist but Yamaha said you know if you like that other mouthpiece
better we'll use that. I will say that if I lost this mouthpiece and was unable to get a duplicate
I could play the Yamaha mouthpiece pretty well and without much difference. The thing I like
about the Peter Pickett which is probably again due to the fact that he has different tools than
and also he's in the United States where it's easier to work with them
than in Japan which I had to do at the time. I liked the feeling a little bit better
and I feel like I got a bit more harmonic structure out of the tone that was created
through this particular mouthpiece. That's enough detail on that. The two characteristics you need
to consider in choosing a mouthpiece or changing mouthpieces is the ease of execution of playing
and the sound character that you're getting on your trumpet. Is it what you want? Is it beautiful
for what you need? And are you able to play with the correct sound for the music you need to play
in your ensembles, in your solos, and in any setting that is important to you or is most of
your activity? How does the mouthpiece sound on your trumpet? Make your trumpet sound? And how do
you interface with it? How easily? How comfortably? There's compromise and I'm a really big example of
compromise. I have chosen to go kind of in a middle direction where when I lean on the instrument it
can get commercial sounding. When I'm playing contemporary concerti, for instance with
orchestras or bands that have ranges up to high G and sometimes A flat, it really helps me to
execute those pieces while I can still play what I consider to be a beautiful sound with phrasing
but it's not super dark, totally. And then to simplify where I'm going with this, I have
basically three mouthpieces that I use the most often and two for trumpet. So the third one is
flugelhorn and other horns I use one of these two mouthpieces that I have here today. The one I use
99% of the time is the shallowest one. It's not super shallow, it's comfortable, there's room in
it. It's a bit on the brighter side compared to a totally orchestral or totally dark jazz sound, I
admit. And that's where my compromise lies and sometimes I try to adjust that for the musical
needs. I'll give you a little example. The second mouthpiece, and this I want to really emphasize,
the second mouthpiece also made by Peter Pickett is a duplicate of the first mouthpiece. I don't
know if you can see if they're gold and silver well in the video but the one in the trumpet is
gold plated for no special reason except I like the feel of it. This one is silver plated for no
special reason I just haven't had it gold plated. And this is the larger one, the silver one. Now
the thing I wanted to emphasize is it's a very very little difference in size between these two.
It's a few shavings out of the cup which we did through experimentation. It didn't take very long
actually but I was at Peter Pickett Brass facility to do it. And the sound characteristic
I think will be obvious. So here is the shallower mouthpiece that I use 90 some percent of the time.
Now the mouthpiece that has a very slightly deeper cup. Here is the sound difference in a different
context. Now obviously that's a bigger sound with the same person and the same effort up high in a
commercial sense. And I think it's fairly obvious when you listen that the color change was
significant with the larger silver mouthpiece.
