How to Replace Tail Lights 04-06 GMC Sierra

Auto Retech
2 followers
Brought to you by www.1AAuto.com, your source for quality replacement parts and the best
service on the Internet.
Hi, I'm Mike Green.
I'm one of the owners of 1A Auto.
I want to help you save time and money repairing and maintaining your vehicle.
I'm going to use my 20 plus years experience restoring and repairing cars and trucks like
this to show you the correct way to install parts from 1AAuto.com.
The right parts installed correctly, that's going to save you time and money.
Thank you and enjoy the video.
In this video, we'll be replacing a taillight on this 2004 GMC Sierra, a fairly simple project.
It requires only a Phillips screwdriver, basically the same as all 99 to 06 Sierras and Silverados.
All right, so taillight replacement on a GMC or a Chevy Silverado, pretty easy.
Open up the tailgate.
Pretty easy once you get the tailgate open.
Two Phillips screws, right here.
I'm going to use a power tool, so I don't bore you with watching my hands.
Pull them out, put the screws on your handy magnetic screwdriver.
I'll show that to you in a second here.
Hang little 1AAuto magnetic trays, hold your bolts right in place for you so you can find
them.
Then the taillight comes out.
It does have two locating tabs that go into little holes here.
Then the headlight just has thumb twists, I mean, sorry, the taillight, thumb twists,
and you can pull out all three legs.
You can replace the taillight if it's damaged or service the bulbs if you need to.
Let's get it back in.
Make sure those go in.
Now I can find my screws on the nice handy 1AAuto tray.
Start the screws in and tighten them up.
Taillight replacement on the 99 to 06 Sierras and Silverados, nothing more than a Phillips
screwdriver, a few minutes of time really, and also the handy 1AAuto tray available for
just about $15 at 1AAuto.com.
Thank you very much.
Hope it helps you out.
