Easy Wood Bear Carving with a Dremel Rotary Tool (BEGINNERS How To)

Nghệ thuật chạm khắc gỗ
6 followers
Hey guys, I have a block of mahogany here. Six and a half by four by two. I'm gonna be carving a
bear today. I printed it out and put it on both sides just because I didn't want to
draw it out. The first step is gonna be getting the 2d shape as cleanly as I can.
Two inches is a bit too thick to just handle with the Dremel. I don't want to
stress it. So I'm going in with a drill and I'm gonna drill a bunch of holes
around these larger chunks and knock those off. And then I'll use the 561
cutting bit to scrape along the edges to get as clean of a 2d shape as I can.
Alright, here we are. 2d shape as much as possible. So I'll just move it out a
little bit. Cut out the legs, right? Now I'm gonna just... I want the head to be sort of
turning. So I sort of drew that there. It's pretty hard to get a visual, so I'm
gonna draw a line down the back and start to curve the whole thing, including
curving the legs. I'll probably draw the paws on, just so I have a reference of how thick I want the legs.
Take away all these corners. I'll bring the stomach in a bit too. All with the 561.
Alright, so here we've shaped the body sort of. Come in a little bit. Got around the legs a
little. Around the head, a little bit of a curve. I'm gonna take off this paper so
that you can get a better visual. I'll probably use something like this, just a
cutting bit. Okay, last shot I did was five months ago. I'm gonna get back to
this. I haven't picked up the dremel since. So I'm gonna start very slowly, this round
cutting bit, because it's not too aggressive. I'm not gonna cut too deep
without noticing. I'm gonna start to shape the head and the legs, probably
just the general curves. Let's see where we get. Alright, it's going well.
Yeah, I'm still using this round bit and I'm making very quick light passes, almost
like a sketch, so that I don't cut too deep. I'm just sort of shaving around it,
rounding it off. I'm getting the shape that I want. It's still a little bit
blocky, so I'm trying to cut these corners a bit more to give it a bit more
of a spine. I'll probably cut in the stomach a little bit too, because I don't want it to be too
rectangular. Okay, in terms of shape, it looks alright. I'll quickly go over that
corner, but I'm gonna very roughly sand it with one of these, maybe a sanding disc,
just so it's a little smoother, and then I can get a better idea if I like the
shape or not. I think it's all carved to my satisfaction, so I'm gonna start
sanding it. I'm gonna use a sanding disc. This one's pretty much homemade, I just
cut out a piece of sandpaper and glued it at 220 grit, quick passes, just to smooth it out,
and then I can see if I want to touch anything up. So, I used the sanding disc as much as I
could on the outside, and then I went in with a high-grit sanding wheel, like this,
to get between the legs and the smaller parts, and then I hand-sanded it with 220
grit sandpaper. Now I'm moving on with these buffing wheels. I really like these to get a
really nice finish on the wood. I'm starting out with the lower grit, and then working your way
up. I have four different grits going up to 400. I'm not gonna film that part, because it's boring,
but I'll come back to oil. All right, I've finished sanding. This is the final product.
I definitely rushed the sanding a little bit, but I think it's good enough. I went up to 1,000
grit. It's pretty smooth. I'm going to use a little teak oil finish. This is definitely my
favorite part, because I used mahogany, so it should have a really nice color. I'm going to
give this a pretty heavy layer of oil, let it soak, and then about an hour later, put a second
covering of it, and then let it dry overnight. It should be all done. All right, here's the
finished product. The Honduran mahogany started out. This is from the same plank. It has this
beautiful color now, a nice shine, both from the high grit we used to sand, as well as the oil.
I'm really happy with how this came out. It wasn't too complex. It didn't take too much time. There's
a lot of room for error, so if anyone out there makes one for themselves, I'd love to see it.
Please check out my Instagram account or the other videos on this channel. Let me know if
you have any advice or if you like the video, and thanks for watching.
