Learn Sculpting - Lesson 2 - Part 3

The Art of Sculpting
60 followers
The new changes that we're going to do, we're going to make some changes to make this a little bit more realistic to the picture.
And the first one we're going to do is we're going to go to the rear of the rhino here, the African rhino,
and we're going to make these shapes here more consistent,
or should I say we're going to morph the shapes I have here and make them more consistent with the real picture of the rhino.
So let's get started, and what I'm going to do, as you can see, this back leg area is sloped down,
where we have it more rectangular from the original shape, or more right angled from the original rectangle shape.
What we're going to do now is alter this, morph it, so that it is more like the real rhino.
And the way you do this is pretty simply. You just simply take and smooth over, pinch off the excess like this,
and we're going to create that nice slope that you see the rhino has.
As you can see, I'm pinching that off and on both sides I'm taking off that excess clay
and creating an angle that's more consistent with the real rhino.
And I'm just going to pinch a little bit more of that off there.
See, so that's how much we've taken off, and then I'm just going to smooth that over.
Once again, just using my fingers, just smooth that over, and then I'm going to just pinch my little tail back out here
and just redefine him a little bit so that he's not lost there.
And you can play with this on your own and make it more and more consistent with the real rhino.
But as you can see, we've already started to create, just with a few little changes, a lot more complexity from that original simple geometric form.
And what I'm trying to do is show you how to get to the more complex geometric shapes that a real animal has
by simply starting with the simple geometric forms that will advance you towards that goal.
Now the next thing I want to do is focus on the head and the shoulder area.
So let's take a look at the head.
And what we see is that right behind the horn, the head seems to have a scoop, scoops up towards the ears,
where what we've done here, because we used the simple form in the beginning, we have a flat area here.
So once again, I'm just going to kind of pinch and pull away some of that clay that was right through there.
Okay, smooth it over.
Alright, like that, you can see.
Alright, you can see how we did that.
Go back to the picture.
You can see we've created that scoop.
And like I said, you can go back yourself and make this even more accurate than what I'm doing.
I'm just trying to speed things up here to give you an overall idea how to get this sculpture on its way.
Next, I'm going to work on the mouth area here, the lower part of the mouth area and the jaw.
First, what I'm going to do is right here behind the muzzle, I'm going to just take a little pinch of clay away from there.
This area right here.
Just pinch away a little bit.
There, you can see.
Just pinch that little bit of clay away from there.
Again, smoothing it.
Alright, and then there's two ways you can create the jaw line.
The one that I'm going to use is actually add a little bit of clay.
Take that little bit that I've pinched out from here, and I'm just going to move it back here where the jaw line is.
Because there's a lot of muscle in that jaw.
So I'm going to beef that up a little bit there.
Just work that in.
And in doing so, I'm just going to take my finger, roll it around, and actually create the edge of the jaw bone.
Just like that.
And here's where you actually get a little bit of an idea of how the rhino's head looks more like a horse head.
If you study a horse's jaw line, you'll notice that there's a great similarity in this structure, the mouth area up to this jaw line.
Very similar structure between the horse and also the rhino.
Now I'm going to go and smooth that a little bit more like that.
Go to the other side and do the same effect.
Just smooth that around like that.
Take another little pinch of clay and create that jaw line on the other side like so.
Now the last area that we're going to work on are the shoulders.
Now we're going to add, we're going to create a little bit more accuracy in the shoulder area of the rhino.
It's a little hard to see here, in this picture here.
But what we're going to do, this area of the rhino has got a lot of muscle as well.
And what we're going to do is we're just going to add that on and create that extra muscle area that's more consistent with the real rhino right in this area right here.
So I take some more clay here, a little pinch of clay.
And I'm going to just add it on right in this area where there's a little bit of a depression here.
I'm just going to add that on like that.
That's muscle coming in, working it back towards the shoulder area.
And you can see how just adding that little area on creates that muscular shoulder that you see in a real rhino.
And I'll do the same on the other side.
A little piece of clay here, put it there, work it in.
And there, work it in across the front, smooth it in.
And there you have that more accurate looking part that the rhino has.
Now when the rhino has its head up, it also is going to have maybe a little bit of a hanging down on the neck here.
So in this area of the neck, I'm just going to take a little piece of clay like that, roll it out, and then just beef that up a little bit.
I don't want to fuse it all the way in though.
I want to just work it in so that it also looks like a fold of skin that the rhino might have there.
Like that, okay?
So there we are.
And that's about as far as I'm going to take you with the African rhino.
And what I'm going to do is now show you how to change the African rhino to the Indian rhino.
So let's take a look at our Indian rhino here.
And one of the things we see are these very distinct plates all over.
It has almost like a reptilian, a dinosaur look to it.
And it also, the horn is quite different.
So I'm just going to show you a few little changes that will make it look like the Indian rhino.
And the first, the most obvious one, is that we're going to take off that second horn right here.
And we're going to take that big horn and just make it a lot smaller.
Just pinch it off, take your finger and roll it around to keep that nice cone shape.
And like that.
And then we're going to add a little extra lip area above here.
Like that.
A little extra lip on the Indian rhino.
And let's take another look at this picture.
And we can see all of these plates that the rhino has.
And you can see this very, very distinctive shape right here.
And that's pretty easy to simulate here with the sculpture that we're converting from the African to the Indian rhino.
By simply taking and rolling out your little snake-like clay, piece of clay.
The little stringy part like that.
And then what we're going to do is, if you look at the picture, we're going to create a little shape that comes down and around like that.
And then we're going to take that front edge of that little snake-like addition we put on and we're just going to fuse it in like that.
And we're going to leave the other part just kind of stick out there.
Okay, so now we're creating that kind of plate look right there.
And just push it and create the shapes that you see.
Like that.
Alright.
And then you can see that there's another little wrinkle or fold of skin right here.
And then another one.
And then this plate-like shape.
And they're easy to create.
You can either add them on in the form of just create the plate like this and then add it on.
Or you can do the same as we did here on the face, which I like to do.
I think it's the easiest way to do it.
Roll out that little snake-like, rope-like piece of clay.
And then take and create that shape.
Like that.
You see we just kind of lay it on there and then we're just going to fuse the one side in particular over like that.
Alright.
On the front, we're going to create that shape.
Another shape like that.
And these might not be exactly like the one in the picture, but considering I'm doing it upside down,
you'll have the opportunity to look at the picture right side up and kind of duplicate these the way they look.
And let me put a couple little wrinkles on the neck here.
Little wrinkles on the neck.
And this is an area where when you're getting into finer detail,
this is when you could actually start to use a tool.
If you're a man with larger hands like mine, you would certainly need at this stage to take a tool.
And all you need is a simple, common tool like this.
And you just want to work those parts, smooth them in like that.
Just bring them right in like that.
And then you could also shape them better if you want.
Smooth them out like so.
All of these little shapes, you can do that.
But I really want you to practice as much as you can building these forms with your hands
rather than using the tools until you get to the later stages where you're really doing much finer detail work,
which should be about the last 5% of your overall sculpture.
All right, and let me see.
We're going to create this other line right here leading to the back,
which is another overlapping fold of skin, which makes it look like a plate.
That kind of comes down around the belly line here
and then comes up, up towards the back like that.
Okay, and then you have a plate line or fold right here going across the top of the hip.
You take a little piece and just lay it on like that.
And I'm going to use the tool in this case and just simply smooth that edge and go back to my finger.
Smooth it in and you can see we've created that shape.
And then as you get down the leg here, you can see there's several very distinct shapes.
So we're going to create one here and then one down there around the heel.
The first one we're going to create right about here with another little snake or a rope of clay.
Again, blending it in, creating that overlap edge.
And one more right around the heel, right about here like that, like that.
So you can kind of see this is very rough and fast,
but you can kind of see how you achieve that different look that the Indian rhino has
that the African rhino doesn't have, at least not as distinct as the Indian rhino has.
And you'll notice if you look closely, you'll also see that there are like a lot of bumps on these plates
that the Indian rhino has and you don't see them, they're not on the African rhino.
Right here especially you can see them on the hip but also on this plate area around the shoulder.
And they're easy to make. You could just simply take little tiny pieces of clay
and just start putting them on, as many as you want to.
Oops, there we go.
And I'm not going to do all of them, but you can see that little effect by just putting them on.
And then again, either with a brush or with a tool, you can simply fuse those little bumps into the plate area.
And again, you're taking a simple tiny little geometric sphere and you're creating those bumps
and then fusing them into the bigger forms like that.
So, I hope you enjoyed that one.
And next time I think we're going to work on another familiar animal I think you'll all enjoy.
So, take care and good luck.
