How Soccer Balls Are Made In Factory

Wood carving: Tips and Tools
229 followers
All right I'm out here today looking for some some material to make some spoons out of.
So walking around trying to trying to find something good.
Around here on the ground don't see too much. A little stick here. Not not going to be good
for spoons. Keep looking. Okay getting a little closer. Not quite wide enough. A little too dry
but getting warmer. Oh sure sure. Oh this will do nicely. So I've got a bunch of stuff here. A lot of
this is set aside really for bowls but a lot of it will work well for spoons as well. I have stuff
right in front here. This specifically I did set aside for spoons. It's a little bit smaller
diameter. We've got cherry and some maple here. And even this cherry you know this is just
something that I saw fell down over on my neighbor's property. So I ran over there and chopped it up.
And that cherry is going to be pretty well suited. It's nice and easy to carve. It's going to be good
stuff for spoons. Some of the stuff I have over here is going to be good for bowls but not
necessarily for spoons. We can see for example here some walnut and there was a big branch coming
out of it here. So around this branch the grain is going to kind of swirl around a little bit. It's
going to be unpredictable. We're really looking for nice straight grained material. I also have
here some smaller pieces of cherry which I've set aside specifically because there are some pieces
here that would be well suited to making a ladle. So in order to get a nice strong
spoon that kind of comes up into the ladle here I want to have one of these kind of branched
pieces here. So we're going to give that a shot with the ladle. This is getting a little bit small
in diameter for a spoon but if we split it in half we should still be able to get a nice big bowl
for a ladle or something like that. Okay so in selecting a piece of wood the species of course
is going to be important. We want to use hard woods. We're also using green wood so that
indicates wood that has a very high moisture content. It's freshly cut. What I've done with
a lot of these pieces is I've encoded them with a product called Anchor Seal and that locks in
the moisture and for the most part prevents kind of splitting like this. Some things we wouldn't
want to work with would be over here we have a little piece of white pine. I'm going to set that
aside for something else. Over here this is actually Bartlett pear wood and the pear wood is
very attractive but it's extremely hard and what's very difficult about it is here you can see in
this piece that I've split the grain is kind of wavy and kind of undulates throughout the piece
of wood so it makes getting nice predictable cuts very challenging. So this is some wood that I would
not want to use for spoons. I also want to use a I don't want a wood that's open pour. I want
something that's closed pour, diffuse porous I believe that's called. So that would be something
like our maple over here, sycamore, walnut. There's some ash back there that's semi-ring porous so it's
not ideal but you can use it. There's some white oak over here kind of same thing. It's a little
bit more porous but it is very attractive and it will work for a spoon. It's good stuff but again
oak of course is very very hard and dense so that can be a bit of a challenge too. So for me the
best woods are generally cherry, maple, walnut. I have some birch over here. This is the birch
and you can see there's a pretty significant difference between the heartwood and the sapwood
and this is something that I can use to you know kind of enhance the spoon visually
by orienting the spoon in a different way within the log. Some of the wood I have over here too
this is Norway maple versus like a sugar maple and you know sugar maple that's hard maple it's
really you know very hard material but it does make a lovely spoon. In the case of this Norway
maple it carves all right but you can see that the the rings are pretty widespread and it can
make getting a nice cut in the material a little bit challenging. Sometimes it splinters apart a
little bit. This wood too you know it's a little bit bland looking but you know you can class it
up a bit with a little bit of paint or something like that. From this piece I want to select a
from which I can actually pull my spoon out. So here I'm trying to get something about 12 inches
long. I want to find a spot that's free of knots. You can see here there's a knot a knot so when I
cut this I'm going to chop right here and chop up here. This is going to give me a nice clean
free spot here. So that's what I'm looking for is an area that's going to be free of knots.
Something like this you know it's full of branches. This is not going to be well suited
to the spoon. The grain is going to swirl around. It's going to make it unpredictable. It's going
to split irregularly. So this really isn't isn't great stuff. I really want that stuff really nice
and straight and even like this wood here it's relatively straight looking but when I split it
you can see how it's twisted through here. This makes the grain relatively unpredictable
and even when I attempted to kind of make my spoon out of it as I was cutting in it's a little
tricky to see but the grain is torn out quite a bit because the fibers are twisting all throughout
the spoon. So for me I threw this aside I'm not even going to use it. As compared to same species
here this is also cherry but you can see using my draw knife here I was able to really quickly and
easily establish nice flat planes along predictable surfaces here. So once I've selected kind of a
length that I'm looking for my first step is going to then be to split that piece down.
So here we have a piece which is relatively straight free of knots. This is going to be
well suited to what I need. So I have a little bit of a crack here at the end
and I'm going to split right along that. You can see how quickly and easily that split
nice and straight. This is going to make carving the spoon really easy. You can see too here I've
split the piece straight in half and on this surface this is what's called quarter sawn wood
and with this quarter sawn wood you can see it's got this really beautiful quilted kind of flecking
pattern. Once oil is on here you'll really be able to see that and this is going to dictate the way
that you prepare your spoon blank. So there's a couple different ways to orient the spoon within
the blank. So this surface the quarter sawn surface you can see this also in this oak spoon
you can see kind of this flecking which is characteristic of oak and you can see how I
kind of oriented it along the side of a piece of wood just like this. On the left here we have what
is called the sapwood. In the case of the cherry it's the lighter bit off to the side here. So
you can also see here we have something quarter sawn which is placed in the wood like this.
This is a plain sawn spoon and what I've done here is I've tried to capture the sapwood
by orienting the spoon sideways like so. So rather than going this way it's oriented this way.
So to do that kind of maneuver I would take my piece of wood split this again so I'll go ahead
and do that. So this type of spoon would then be oriented like this so I would axe it in so that
the bowl of the spoon is down here and the handle extends outward. You can see why I want to avoid
something that's knotty like this. If I do try to split it we can see how the grain is moving
irregularly through that wood and it's going to make carving quite a challenge.
